4.6L Crown Vic PI engine into a jeep
09-15-2004, 04:46 PM
#1
Guest
Posts: n/a
4.6L Crown Vic PI engine into a jeep
I have a totalled Crown Victoria Police Interceptor with a good 4.6L
engine and low miles on it. I was wondering has any successfully
swapped this engine into a jeep? If so, what kind of transmission and
transfer case was used? Thanks.
Rob
engine and low miles on it. I was wondering has any successfully
swapped this engine into a jeep? If so, what kind of transmission and
transfer case was used? Thanks.
Rob
09-15-2004, 11:28 PM
#2
Guest
Posts: n/a
Re: 4.6L Crown Vic PI engine into a jeep
themophead@hotmail.com (themophead) wrote in message news:<e73cb4b4.0409151246.2bf08d39@posting.google. com>...
> I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> engine and low miles on it. I was wondering has any successfully
> swapped this engine into a jeep? If so, what kind of transmission and
> transfer case was used? Thanks.
It probably has as its first, best purpose a home in a Ford product
or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
displacement? And a torque curve not suited to four wheel drive
service.
If you really want to do an engine swap, I'd look at diesel. The
torque curve is right and the economy is a lot better.
> I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> engine and low miles on it. I was wondering has any successfully
> swapped this engine into a jeep? If so, what kind of transmission and
> transfer case was used? Thanks.
It probably has as its first, best purpose a home in a Ford product
or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
displacement? And a torque curve not suited to four wheel drive
service.
If you really want to do an engine swap, I'd look at diesel. The
torque curve is right and the economy is a lot better.
09-15-2004, 11:28 PM
#3
Guest
Posts: n/a
Re: 4.6L Crown Vic PI engine into a jeep
themophead@hotmail.com (themophead) wrote in message news:<e73cb4b4.0409151246.2bf08d39@posting.google. com>...
> I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> engine and low miles on it. I was wondering has any successfully
> swapped this engine into a jeep? If so, what kind of transmission and
> transfer case was used? Thanks.
It probably has as its first, best purpose a home in a Ford product
or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
displacement? And a torque curve not suited to four wheel drive
service.
If you really want to do an engine swap, I'd look at diesel. The
torque curve is right and the economy is a lot better.
> I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> engine and low miles on it. I was wondering has any successfully
> swapped this engine into a jeep? If so, what kind of transmission and
> transfer case was used? Thanks.
It probably has as its first, best purpose a home in a Ford product
or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
displacement? And a torque curve not suited to four wheel drive
service.
If you really want to do an engine swap, I'd look at diesel. The
torque curve is right and the economy is a lot better.
09-15-2004, 11:28 PM
#4
Guest
Posts: n/a
Re: 4.6L Crown Vic PI engine into a jeep
themophead@hotmail.com (themophead) wrote in message news:<e73cb4b4.0409151246.2bf08d39@posting.google. com>...
> I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> engine and low miles on it. I was wondering has any successfully
> swapped this engine into a jeep? If so, what kind of transmission and
> transfer case was used? Thanks.
It probably has as its first, best purpose a home in a Ford product
or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
displacement? And a torque curve not suited to four wheel drive
service.
If you really want to do an engine swap, I'd look at diesel. The
torque curve is right and the economy is a lot better.
> I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> engine and low miles on it. I was wondering has any successfully
> swapped this engine into a jeep? If so, what kind of transmission and
> transfer case was used? Thanks.
It probably has as its first, best purpose a home in a Ford product
or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
displacement? And a torque curve not suited to four wheel drive
service.
If you really want to do an engine swap, I'd look at diesel. The
torque curve is right and the economy is a lot better.
09-15-2004, 11:50 PM
#5
Guest
Posts: n/a
Re: 4.6L Crown Vic PI engine into a jeep
Me, I'd love to swap in a Ford 6.8L v10 into a Jeep, just to see if it could
be done...
"Ted Azito" <larboard34@hotmail.com> wrote in message
news:b53da461.0409151928.4fe809d3@posting.google.c om...
> themophead@hotmail.com (themophead) wrote in message
news:<e73cb4b4.0409151246.2bf08d39@posting.google. com>...
> > I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> > engine and low miles on it. I was wondering has any successfully
> > swapped this engine into a jeep? If so, what kind of transmission and
> > transfer case was used? Thanks.
>
> It probably has as its first, best purpose a home in a Ford product
> or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
> displacement? And a torque curve not suited to four wheel drive
> service.
>
> If you really want to do an engine swap, I'd look at diesel. The
> torque curve is right and the economy is a lot better.
be done...
"Ted Azito" <larboard34@hotmail.com> wrote in message
news:b53da461.0409151928.4fe809d3@posting.google.c om...
> themophead@hotmail.com (themophead) wrote in message
news:<e73cb4b4.0409151246.2bf08d39@posting.google. com>...
> > I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> > engine and low miles on it. I was wondering has any successfully
> > swapped this engine into a jeep? If so, what kind of transmission and
> > transfer case was used? Thanks.
>
> It probably has as its first, best purpose a home in a Ford product
> or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
> displacement? And a torque curve not suited to four wheel drive
> service.
>
> If you really want to do an engine swap, I'd look at diesel. The
> torque curve is right and the economy is a lot better.
09-15-2004, 11:50 PM
#6
Guest
Posts: n/a
Re: 4.6L Crown Vic PI engine into a jeep
Me, I'd love to swap in a Ford 6.8L v10 into a Jeep, just to see if it could
be done...
"Ted Azito" <larboard34@hotmail.com> wrote in message
news:b53da461.0409151928.4fe809d3@posting.google.c om...
> themophead@hotmail.com (themophead) wrote in message
news:<e73cb4b4.0409151246.2bf08d39@posting.google. com>...
> > I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> > engine and low miles on it. I was wondering has any successfully
> > swapped this engine into a jeep? If so, what kind of transmission and
> > transfer case was used? Thanks.
>
> It probably has as its first, best purpose a home in a Ford product
> or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
> displacement? And a torque curve not suited to four wheel drive
> service.
>
> If you really want to do an engine swap, I'd look at diesel. The
> torque curve is right and the economy is a lot better.
be done...
"Ted Azito" <larboard34@hotmail.com> wrote in message
news:b53da461.0409151928.4fe809d3@posting.google.c om...
> themophead@hotmail.com (themophead) wrote in message
news:<e73cb4b4.0409151246.2bf08d39@posting.google. com>...
> > I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> > engine and low miles on it. I was wondering has any successfully
> > swapped this engine into a jeep? If so, what kind of transmission and
> > transfer case was used? Thanks.
>
> It probably has as its first, best purpose a home in a Ford product
> or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
> displacement? And a torque curve not suited to four wheel drive
> service.
>
> If you really want to do an engine swap, I'd look at diesel. The
> torque curve is right and the economy is a lot better.
09-15-2004, 11:50 PM
#7
Guest
Posts: n/a
Re: 4.6L Crown Vic PI engine into a jeep
Me, I'd love to swap in a Ford 6.8L v10 into a Jeep, just to see if it could
be done...
"Ted Azito" <larboard34@hotmail.com> wrote in message
news:b53da461.0409151928.4fe809d3@posting.google.c om...
> themophead@hotmail.com (themophead) wrote in message
news:<e73cb4b4.0409151246.2bf08d39@posting.google. com>...
> > I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> > engine and low miles on it. I was wondering has any successfully
> > swapped this engine into a jeep? If so, what kind of transmission and
> > transfer case was used? Thanks.
>
> It probably has as its first, best purpose a home in a Ford product
> or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
> displacement? And a torque curve not suited to four wheel drive
> service.
>
> If you really want to do an engine swap, I'd look at diesel. The
> torque curve is right and the economy is a lot better.
be done...
"Ted Azito" <larboard34@hotmail.com> wrote in message
news:b53da461.0409151928.4fe809d3@posting.google.c om...
> themophead@hotmail.com (themophead) wrote in message
news:<e73cb4b4.0409151246.2bf08d39@posting.google. com>...
> > I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> > engine and low miles on it. I was wondering has any successfully
> > swapped this engine into a jeep? If so, what kind of transmission and
> > transfer case was used? Thanks.
>
> It probably has as its first, best purpose a home in a Ford product
> or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
> displacement? And a torque curve not suited to four wheel drive
> service.
>
> If you really want to do an engine swap, I'd look at diesel. The
> torque curve is right and the economy is a lot better.
09-15-2004, 11:54 PM
#8
Guest
Posts: n/a
Re: 4.6L Crown Vic PI engine into a jeep
Of course, it could be done just like the Viper:
http://www.off-road.com/4x4web/features/1999/03/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Me, I'd love to swap in a Ford 6.8L v10 into a Jeep, just to see if it could
> be done...
http://www.off-road.com/4x4web/features/1999/03/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Me, I'd love to swap in a Ford 6.8L v10 into a Jeep, just to see if it could
> be done...
09-15-2004, 11:54 PM
#9
Guest
Posts: n/a
Re: 4.6L Crown Vic PI engine into a jeep
Of course, it could be done just like the Viper:
http://www.off-road.com/4x4web/features/1999/03/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Me, I'd love to swap in a Ford 6.8L v10 into a Jeep, just to see if it could
> be done...
http://www.off-road.com/4x4web/features/1999/03/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Me, I'd love to swap in a Ford 6.8L v10 into a Jeep, just to see if it could
> be done...
09-15-2004, 11:54 PM
#10
Guest
Posts: n/a
Re: 4.6L Crown Vic PI engine into a jeep
Of course, it could be done just like the Viper:
http://www.off-road.com/4x4web/features/1999/03/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Me, I'd love to swap in a Ford 6.8L v10 into a Jeep, just to see if it could
> be done...
http://www.off-road.com/4x4web/features/1999/03/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Me, I'd love to swap in a Ford 6.8L v10 into a Jeep, just to see if it could
> be done...