4.0L header
09-01-2007, 12:30 PM
#1
Guest
Posts: n/a
4.0L header
Guys,
What are your thoughts on this header for my 00 XJ 4.0L?
http://tinyurl.com/2qvdeo
For $155, it looks too good to be true.
Carl
What are your thoughts on this header for my 00 XJ 4.0L?
http://tinyurl.com/2qvdeo
For $155, it looks too good to be true.
Carl
09-01-2007, 01:22 PM
#2
Guest
Posts: n/a
Re: 4.0L header
Carl S wrote:
> Guys,
>
> What are your thoughts on this header for my 00 XJ 4.0L?
>
> http://tinyurl.com/2qvdeo
>
> For $155, it looks too good to be true.
>
> Carl
>
>
I "think" that is the same guy a few of my buddies buy headers from for
their demo derby cars. I know he is in Iowa. If it is the same guy, then
I would tell you that his stuff is decent. They buy small block Chevy
headers (the type that stick straight up out the hood) for about $150 a
pair. They are nothing fancy, but the welding and bending are good
quality. I will try to find out if this is the same guy and post back here.
Chris
> Guys,
>
> What are your thoughts on this header for my 00 XJ 4.0L?
>
> http://tinyurl.com/2qvdeo
>
> For $155, it looks too good to be true.
>
> Carl
>
>
I "think" that is the same guy a few of my buddies buy headers from for
their demo derby cars. I know he is in Iowa. If it is the same guy, then
I would tell you that his stuff is decent. They buy small block Chevy
headers (the type that stick straight up out the hood) for about $150 a
pair. They are nothing fancy, but the welding and bending are good
quality. I will try to find out if this is the same guy and post back here.
Chris
09-01-2007, 01:22 PM
#3
Guest
Posts: n/a
Re: 4.0L header
Carl S wrote:
> Guys,
>
> What are your thoughts on this header for my 00 XJ 4.0L?
>
> http://tinyurl.com/2qvdeo
>
> For $155, it looks too good to be true.
>
> Carl
>
>
I "think" that is the same guy a few of my buddies buy headers from for
their demo derby cars. I know he is in Iowa. If it is the same guy, then
I would tell you that his stuff is decent. They buy small block Chevy
headers (the type that stick straight up out the hood) for about $150 a
pair. They are nothing fancy, but the welding and bending are good
quality. I will try to find out if this is the same guy and post back here.
Chris
> Guys,
>
> What are your thoughts on this header for my 00 XJ 4.0L?
>
> http://tinyurl.com/2qvdeo
>
> For $155, it looks too good to be true.
>
> Carl
>
>
I "think" that is the same guy a few of my buddies buy headers from for
their demo derby cars. I know he is in Iowa. If it is the same guy, then
I would tell you that his stuff is decent. They buy small block Chevy
headers (the type that stick straight up out the hood) for about $150 a
pair. They are nothing fancy, but the welding and bending are good
quality. I will try to find out if this is the same guy and post back here.
Chris
09-01-2007, 01:22 PM
#4
Guest
Posts: n/a
Re: 4.0L header
Carl S wrote:
> Guys,
>
> What are your thoughts on this header for my 00 XJ 4.0L?
>
> http://tinyurl.com/2qvdeo
>
> For $155, it looks too good to be true.
>
> Carl
>
>
I "think" that is the same guy a few of my buddies buy headers from for
their demo derby cars. I know he is in Iowa. If it is the same guy, then
I would tell you that his stuff is decent. They buy small block Chevy
headers (the type that stick straight up out the hood) for about $150 a
pair. They are nothing fancy, but the welding and bending are good
quality. I will try to find out if this is the same guy and post back here.
Chris
> Guys,
>
> What are your thoughts on this header for my 00 XJ 4.0L?
>
> http://tinyurl.com/2qvdeo
>
> For $155, it looks too good to be true.
>
> Carl
>
>
I "think" that is the same guy a few of my buddies buy headers from for
their demo derby cars. I know he is in Iowa. If it is the same guy, then
I would tell you that his stuff is decent. They buy small block Chevy
headers (the type that stick straight up out the hood) for about $150 a
pair. They are nothing fancy, but the welding and bending are good
quality. I will try to find out if this is the same guy and post back here.
Chris
09-01-2007, 01:22 PM
#5
Guest
Posts: n/a
Re: 4.0L header
Carl S wrote:
> Guys,
>
> What are your thoughts on this header for my 00 XJ 4.0L?
>
> http://tinyurl.com/2qvdeo
>
> For $155, it looks too good to be true.
>
> Carl
>
>
I "think" that is the same guy a few of my buddies buy headers from for
their demo derby cars. I know he is in Iowa. If it is the same guy, then
I would tell you that his stuff is decent. They buy small block Chevy
headers (the type that stick straight up out the hood) for about $150 a
pair. They are nothing fancy, but the welding and bending are good
quality. I will try to find out if this is the same guy and post back here.
Chris
> Guys,
>
> What are your thoughts on this header for my 00 XJ 4.0L?
>
> http://tinyurl.com/2qvdeo
>
> For $155, it looks too good to be true.
>
> Carl
>
>
I "think" that is the same guy a few of my buddies buy headers from for
their demo derby cars. I know he is in Iowa. If it is the same guy, then
I would tell you that his stuff is decent. They buy small block Chevy
headers (the type that stick straight up out the hood) for about $150 a
pair. They are nothing fancy, but the welding and bending are good
quality. I will try to find out if this is the same guy and post back here.
Chris
09-01-2007, 03:18 PM
#6
Guest
Posts: n/a
Re: 4.0L header
c wrote:
> Carl S wrote:
>> Guys,
>>
>> What are your thoughts on this header for my 00 XJ 4.0L?
>>
>> http://tinyurl.com/2qvdeo
>>
>> For $155, it looks too good to be true.
> I "think" that is the same guy a few of my buddies buy headers from
> for their demo derby cars. I know he is in Iowa. If it is the same
> guy, then I would tell you that his stuff is decent. They buy small block Chevy
> headers (the type that stick straight up out the hood) for about $150
> a pair. They are nothing fancy, but the welding and bending are good
> quality. I will try to find out if this is the same guy and post back
> here.
That looks like a dead ringer for my Banks header.
http://revbeergoggles.com/banks/images/headerfits.jpg
I did have to do a bit of grinding on the motor mount to get
it to clear.
--
DougW
> Carl S wrote:
>> Guys,
>>
>> What are your thoughts on this header for my 00 XJ 4.0L?
>>
>> http://tinyurl.com/2qvdeo
>>
>> For $155, it looks too good to be true.
> I "think" that is the same guy a few of my buddies buy headers from
> for their demo derby cars. I know he is in Iowa. If it is the same
> guy, then I would tell you that his stuff is decent. They buy small block Chevy
> headers (the type that stick straight up out the hood) for about $150
> a pair. They are nothing fancy, but the welding and bending are good
> quality. I will try to find out if this is the same guy and post back
> here.
That looks like a dead ringer for my Banks header.
http://revbeergoggles.com/banks/images/headerfits.jpg
I did have to do a bit of grinding on the motor mount to get
it to clear.
--
DougW
09-01-2007, 03:18 PM
#7
Guest
Posts: n/a
Re: 4.0L header
c wrote:
> Carl S wrote:
>> Guys,
>>
>> What are your thoughts on this header for my 00 XJ 4.0L?
>>
>> http://tinyurl.com/2qvdeo
>>
>> For $155, it looks too good to be true.
> I "think" that is the same guy a few of my buddies buy headers from
> for their demo derby cars. I know he is in Iowa. If it is the same
> guy, then I would tell you that his stuff is decent. They buy small block Chevy
> headers (the type that stick straight up out the hood) for about $150
> a pair. They are nothing fancy, but the welding and bending are good
> quality. I will try to find out if this is the same guy and post back
> here.
That looks like a dead ringer for my Banks header.
http://revbeergoggles.com/banks/images/headerfits.jpg
I did have to do a bit of grinding on the motor mount to get
it to clear.
--
DougW
> Carl S wrote:
>> Guys,
>>
>> What are your thoughts on this header for my 00 XJ 4.0L?
>>
>> http://tinyurl.com/2qvdeo
>>
>> For $155, it looks too good to be true.
> I "think" that is the same guy a few of my buddies buy headers from
> for their demo derby cars. I know he is in Iowa. If it is the same
> guy, then I would tell you that his stuff is decent. They buy small block Chevy
> headers (the type that stick straight up out the hood) for about $150
> a pair. They are nothing fancy, but the welding and bending are good
> quality. I will try to find out if this is the same guy and post back
> here.
That looks like a dead ringer for my Banks header.
http://revbeergoggles.com/banks/images/headerfits.jpg
I did have to do a bit of grinding on the motor mount to get
it to clear.
--
DougW
09-01-2007, 03:18 PM
#8
Guest
Posts: n/a
Re: 4.0L header
c wrote:
> Carl S wrote:
>> Guys,
>>
>> What are your thoughts on this header for my 00 XJ 4.0L?
>>
>> http://tinyurl.com/2qvdeo
>>
>> For $155, it looks too good to be true.
> I "think" that is the same guy a few of my buddies buy headers from
> for their demo derby cars. I know he is in Iowa. If it is the same
> guy, then I would tell you that his stuff is decent. They buy small block Chevy
> headers (the type that stick straight up out the hood) for about $150
> a pair. They are nothing fancy, but the welding and bending are good
> quality. I will try to find out if this is the same guy and post back
> here.
That looks like a dead ringer for my Banks header.
http://revbeergoggles.com/banks/images/headerfits.jpg
I did have to do a bit of grinding on the motor mount to get
it to clear.
--
DougW
> Carl S wrote:
>> Guys,
>>
>> What are your thoughts on this header for my 00 XJ 4.0L?
>>
>> http://tinyurl.com/2qvdeo
>>
>> For $155, it looks too good to be true.
> I "think" that is the same guy a few of my buddies buy headers from
> for their demo derby cars. I know he is in Iowa. If it is the same
> guy, then I would tell you that his stuff is decent. They buy small block Chevy
> headers (the type that stick straight up out the hood) for about $150
> a pair. They are nothing fancy, but the welding and bending are good
> quality. I will try to find out if this is the same guy and post back
> here.
That looks like a dead ringer for my Banks header.
http://revbeergoggles.com/banks/images/headerfits.jpg
I did have to do a bit of grinding on the motor mount to get
it to clear.
--
DougW
09-01-2007, 03:18 PM
#9
Guest
Posts: n/a
Re: 4.0L header
c wrote:
> Carl S wrote:
>> Guys,
>>
>> What are your thoughts on this header for my 00 XJ 4.0L?
>>
>> http://tinyurl.com/2qvdeo
>>
>> For $155, it looks too good to be true.
> I "think" that is the same guy a few of my buddies buy headers from
> for their demo derby cars. I know he is in Iowa. If it is the same
> guy, then I would tell you that his stuff is decent. They buy small block Chevy
> headers (the type that stick straight up out the hood) for about $150
> a pair. They are nothing fancy, but the welding and bending are good
> quality. I will try to find out if this is the same guy and post back
> here.
That looks like a dead ringer for my Banks header.
http://revbeergoggles.com/banks/images/headerfits.jpg
I did have to do a bit of grinding on the motor mount to get
it to clear.
--
DougW
> Carl S wrote:
>> Guys,
>>
>> What are your thoughts on this header for my 00 XJ 4.0L?
>>
>> http://tinyurl.com/2qvdeo
>>
>> For $155, it looks too good to be true.
> I "think" that is the same guy a few of my buddies buy headers from
> for their demo derby cars. I know he is in Iowa. If it is the same
> guy, then I would tell you that his stuff is decent. They buy small block Chevy
> headers (the type that stick straight up out the hood) for about $150
> a pair. They are nothing fancy, but the welding and bending are good
> quality. I will try to find out if this is the same guy and post back
> here.
That looks like a dead ringer for my Banks header.
http://revbeergoggles.com/banks/images/headerfits.jpg
I did have to do a bit of grinding on the motor mount to get
it to clear.
--
DougW
09-01-2007, 03:22 PM
#10
Guest
Posts: n/a
Re: 4.0L header
Doug,
Did you install and run the header before your supercharger? How did you
like it? Did it change anything (power/mileage/sound/anything?)
Carl
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:cWiCi.95128$Vk6.44835@newsfe07.phx...
>c wrote:
>> Carl S wrote:
>>> Guys,
>>>
>>> What are your thoughts on this header for my 00 XJ 4.0L?
>>>
>>> http://tinyurl.com/2qvdeo
>>>
>>> For $155, it looks too good to be true.
>
>
>> I "think" that is the same guy a few of my buddies buy headers from
>> for their demo derby cars. I know he is in Iowa. If it is the same
>> guy, then I would tell you that his stuff is decent. They buy small block
>> Chevy
>> headers (the type that stick straight up out the hood) for about $150
>> a pair. They are nothing fancy, but the welding and bending are good
>> quality. I will try to find out if this is the same guy and post back
>> here.
>
> That looks like a dead ringer for my Banks header.
> http://revbeergoggles.com/banks/images/headerfits.jpg
>
> I did have to do a bit of grinding on the motor mount to get
> it to clear.
>
> --
> DougW
>
Did you install and run the header before your supercharger? How did you
like it? Did it change anything (power/mileage/sound/anything?)
Carl
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:cWiCi.95128$Vk6.44835@newsfe07.phx...
>c wrote:
>> Carl S wrote:
>>> Guys,
>>>
>>> What are your thoughts on this header for my 00 XJ 4.0L?
>>>
>>> http://tinyurl.com/2qvdeo
>>>
>>> For $155, it looks too good to be true.
>
>
>> I "think" that is the same guy a few of my buddies buy headers from
>> for their demo derby cars. I know he is in Iowa. If it is the same
>> guy, then I would tell you that his stuff is decent. They buy small block
>> Chevy
>> headers (the type that stick straight up out the hood) for about $150
>> a pair. They are nothing fancy, but the welding and bending are good
>> quality. I will try to find out if this is the same guy and post back
>> here.
>
> That looks like a dead ringer for my Banks header.
> http://revbeergoggles.com/banks/images/headerfits.jpg
>
> I did have to do a bit of grinding on the motor mount to get
> it to clear.
>
> --
> DougW
>