4.0 L Core/Freeze Plugs
#51
Guest
Posts: n/a
Re: 4.0 L Core/Freeze Plugs
well blow me - never knew you got kits for that. I've only ever used a
mallet on an old socket to seat them, and a podger to remove 'em.
Since, "podger" seems to be a british term, this is the sort of thing ( the
non spanner end is the podger bit )
http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
What do you call them ?
Dave
"DougW" <post.replies@invalid.address> wrote in message
news:rSZqf.31976$---.11008@dukeread07...
> Quattro GR4 did pass the time by typing:
> > DougW wrote:
> >
> >> flush, as in the outside edge is flush? That's not seated unless your
> >> talking about a dome type plug. There has to be an edge for the plug to
> >> catch on.
> >>
> >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
like.
> >>
> >> --
> >> DougW
> >
> > You don't say! There in lies a good part of my problem. I will take
> > the manifolds off again and reset these in like the picture (third time
> > - I should be able to do this in 15 minutes LOL).
> >
> > I'm curious that the tool that is supposed to help me install these
> > sets them exactly flush, not in-set like that picture. Live and learn.
>
> Does it look like this
> http://www.sjdiscounttools.com/otc4603.html
>
> I just borrowed mine from the local AutoZone.
>
> --
> DougW
>
>
mallet on an old socket to seat them, and a podger to remove 'em.
Since, "podger" seems to be a british term, this is the sort of thing ( the
non spanner end is the podger bit )
http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
What do you call them ?
Dave
"DougW" <post.replies@invalid.address> wrote in message
news:rSZqf.31976$---.11008@dukeread07...
> Quattro GR4 did pass the time by typing:
> > DougW wrote:
> >
> >> flush, as in the outside edge is flush? That's not seated unless your
> >> talking about a dome type plug. There has to be an edge for the plug to
> >> catch on.
> >>
> >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
like.
> >>
> >> --
> >> DougW
> >
> > You don't say! There in lies a good part of my problem. I will take
> > the manifolds off again and reset these in like the picture (third time
> > - I should be able to do this in 15 minutes LOL).
> >
> > I'm curious that the tool that is supposed to help me install these
> > sets them exactly flush, not in-set like that picture. Live and learn.
>
> Does it look like this
> http://www.sjdiscounttools.com/otc4603.html
>
> I just borrowed mine from the local AutoZone.
>
> --
> DougW
>
>
#52
Guest
Posts: n/a
Re: 4.0 L Core/Freeze Plugs
well blow me - never knew you got kits for that. I've only ever used a
mallet on an old socket to seat them, and a podger to remove 'em.
Since, "podger" seems to be a british term, this is the sort of thing ( the
non spanner end is the podger bit )
http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
What do you call them ?
Dave
"DougW" <post.replies@invalid.address> wrote in message
news:rSZqf.31976$---.11008@dukeread07...
> Quattro GR4 did pass the time by typing:
> > DougW wrote:
> >
> >> flush, as in the outside edge is flush? That's not seated unless your
> >> talking about a dome type plug. There has to be an edge for the plug to
> >> catch on.
> >>
> >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
like.
> >>
> >> --
> >> DougW
> >
> > You don't say! There in lies a good part of my problem. I will take
> > the manifolds off again and reset these in like the picture (third time
> > - I should be able to do this in 15 minutes LOL).
> >
> > I'm curious that the tool that is supposed to help me install these
> > sets them exactly flush, not in-set like that picture. Live and learn.
>
> Does it look like this
> http://www.sjdiscounttools.com/otc4603.html
>
> I just borrowed mine from the local AutoZone.
>
> --
> DougW
>
>
mallet on an old socket to seat them, and a podger to remove 'em.
Since, "podger" seems to be a british term, this is the sort of thing ( the
non spanner end is the podger bit )
http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
What do you call them ?
Dave
"DougW" <post.replies@invalid.address> wrote in message
news:rSZqf.31976$---.11008@dukeread07...
> Quattro GR4 did pass the time by typing:
> > DougW wrote:
> >
> >> flush, as in the outside edge is flush? That's not seated unless your
> >> talking about a dome type plug. There has to be an edge for the plug to
> >> catch on.
> >>
> >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
like.
> >>
> >> --
> >> DougW
> >
> > You don't say! There in lies a good part of my problem. I will take
> > the manifolds off again and reset these in like the picture (third time
> > - I should be able to do this in 15 minutes LOL).
> >
> > I'm curious that the tool that is supposed to help me install these
> > sets them exactly flush, not in-set like that picture. Live and learn.
>
> Does it look like this
> http://www.sjdiscounttools.com/otc4603.html
>
> I just borrowed mine from the local AutoZone.
>
> --
> DougW
>
>
#53
Guest
Posts: n/a
Re: 4.0 L Core/Freeze Plugs
I have never seen anything like it....
We use an ice pick/awl or a center punch with a hammer.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Dave Milne wrote:
>
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
>
> Dave
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:rSZqf.31976$---.11008@dukeread07...
> > Quattro GR4 did pass the time by typing:
> > > DougW wrote:
> > >
> > >> flush, as in the outside edge is flush? That's not seated unless your
> > >> talking about a dome type plug. There has to be an edge for the plug to
> > >> catch on.
> > >>
> > >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
> like.
> > >>
> > >> --
> > >> DougW
> > >
> > > You don't say! There in lies a good part of my problem. I will take
> > > the manifolds off again and reset these in like the picture (third time
> > > - I should be able to do this in 15 minutes LOL).
> > >
> > > I'm curious that the tool that is supposed to help me install these
> > > sets them exactly flush, not in-set like that picture. Live and learn.
> >
> > Does it look like this
> > http://www.sjdiscounttools.com/otc4603.html
> >
> > I just borrowed mine from the local AutoZone.
> >
> > --
> > DougW
> >
> >
We use an ice pick/awl or a center punch with a hammer.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Dave Milne wrote:
>
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
>
> Dave
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:rSZqf.31976$---.11008@dukeread07...
> > Quattro GR4 did pass the time by typing:
> > > DougW wrote:
> > >
> > >> flush, as in the outside edge is flush? That's not seated unless your
> > >> talking about a dome type plug. There has to be an edge for the plug to
> > >> catch on.
> > >>
> > >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
> like.
> > >>
> > >> --
> > >> DougW
> > >
> > > You don't say! There in lies a good part of my problem. I will take
> > > the manifolds off again and reset these in like the picture (third time
> > > - I should be able to do this in 15 minutes LOL).
> > >
> > > I'm curious that the tool that is supposed to help me install these
> > > sets them exactly flush, not in-set like that picture. Live and learn.
> >
> > Does it look like this
> > http://www.sjdiscounttools.com/otc4603.html
> >
> > I just borrowed mine from the local AutoZone.
> >
> > --
> > DougW
> >
> >
#54
Guest
Posts: n/a
Re: 4.0 L Core/Freeze Plugs
I have never seen anything like it....
We use an ice pick/awl or a center punch with a hammer.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Dave Milne wrote:
>
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
>
> Dave
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:rSZqf.31976$---.11008@dukeread07...
> > Quattro GR4 did pass the time by typing:
> > > DougW wrote:
> > >
> > >> flush, as in the outside edge is flush? That's not seated unless your
> > >> talking about a dome type plug. There has to be an edge for the plug to
> > >> catch on.
> > >>
> > >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
> like.
> > >>
> > >> --
> > >> DougW
> > >
> > > You don't say! There in lies a good part of my problem. I will take
> > > the manifolds off again and reset these in like the picture (third time
> > > - I should be able to do this in 15 minutes LOL).
> > >
> > > I'm curious that the tool that is supposed to help me install these
> > > sets them exactly flush, not in-set like that picture. Live and learn.
> >
> > Does it look like this
> > http://www.sjdiscounttools.com/otc4603.html
> >
> > I just borrowed mine from the local AutoZone.
> >
> > --
> > DougW
> >
> >
We use an ice pick/awl or a center punch with a hammer.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Dave Milne wrote:
>
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
>
> Dave
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:rSZqf.31976$---.11008@dukeread07...
> > Quattro GR4 did pass the time by typing:
> > > DougW wrote:
> > >
> > >> flush, as in the outside edge is flush? That's not seated unless your
> > >> talking about a dome type plug. There has to be an edge for the plug to
> > >> catch on.
> > >>
> > >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
> like.
> > >>
> > >> --
> > >> DougW
> > >
> > > You don't say! There in lies a good part of my problem. I will take
> > > the manifolds off again and reset these in like the picture (third time
> > > - I should be able to do this in 15 minutes LOL).
> > >
> > > I'm curious that the tool that is supposed to help me install these
> > > sets them exactly flush, not in-set like that picture. Live and learn.
> >
> > Does it look like this
> > http://www.sjdiscounttools.com/otc4603.html
> >
> > I just borrowed mine from the local AutoZone.
> >
> > --
> > DougW
> >
> >
#55
Guest
Posts: n/a
Re: 4.0 L Core/Freeze Plugs
I have never seen anything like it....
We use an ice pick/awl or a center punch with a hammer.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Dave Milne wrote:
>
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
>
> Dave
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:rSZqf.31976$---.11008@dukeread07...
> > Quattro GR4 did pass the time by typing:
> > > DougW wrote:
> > >
> > >> flush, as in the outside edge is flush? That's not seated unless your
> > >> talking about a dome type plug. There has to be an edge for the plug to
> > >> catch on.
> > >>
> > >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
> like.
> > >>
> > >> --
> > >> DougW
> > >
> > > You don't say! There in lies a good part of my problem. I will take
> > > the manifolds off again and reset these in like the picture (third time
> > > - I should be able to do this in 15 minutes LOL).
> > >
> > > I'm curious that the tool that is supposed to help me install these
> > > sets them exactly flush, not in-set like that picture. Live and learn.
> >
> > Does it look like this
> > http://www.sjdiscounttools.com/otc4603.html
> >
> > I just borrowed mine from the local AutoZone.
> >
> > --
> > DougW
> >
> >
We use an ice pick/awl or a center punch with a hammer.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Dave Milne wrote:
>
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
>
> Dave
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:rSZqf.31976$---.11008@dukeread07...
> > Quattro GR4 did pass the time by typing:
> > > DougW wrote:
> > >
> > >> flush, as in the outside edge is flush? That's not seated unless your
> > >> talking about a dome type plug. There has to be an edge for the plug to
> > >> catch on.
> > >>
> > >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
> like.
> > >>
> > >> --
> > >> DougW
> > >
> > > You don't say! There in lies a good part of my problem. I will take
> > > the manifolds off again and reset these in like the picture (third time
> > > - I should be able to do this in 15 minutes LOL).
> > >
> > > I'm curious that the tool that is supposed to help me install these
> > > sets them exactly flush, not in-set like that picture. Live and learn.
> >
> > Does it look like this
> > http://www.sjdiscounttools.com/otc4603.html
> >
> > I just borrowed mine from the local AutoZone.
> >
> > --
> > DougW
> >
> >
#56
Guest
Posts: n/a
Re: 4.0 L Core/Freeze Plugs
Dave Milne did pass the time by typing:
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
Spud Wrench
http://www.rastalltool.com/frame_middle/spud.asp
Although there are a few other names and not all
"spud wrenches" are that type.
Commonly used for high-iron/aligning bolt holes in beams and girders
where fingers dare not tread.
--
DougW
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
Spud Wrench
http://www.rastalltool.com/frame_middle/spud.asp
Although there are a few other names and not all
"spud wrenches" are that type.
Commonly used for high-iron/aligning bolt holes in beams and girders
where fingers dare not tread.
--
DougW
#57
Guest
Posts: n/a
Re: 4.0 L Core/Freeze Plugs
Dave Milne did pass the time by typing:
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
Spud Wrench
http://www.rastalltool.com/frame_middle/spud.asp
Although there are a few other names and not all
"spud wrenches" are that type.
Commonly used for high-iron/aligning bolt holes in beams and girders
where fingers dare not tread.
--
DougW
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
Spud Wrench
http://www.rastalltool.com/frame_middle/spud.asp
Although there are a few other names and not all
"spud wrenches" are that type.
Commonly used for high-iron/aligning bolt holes in beams and girders
where fingers dare not tread.
--
DougW
#58
Guest
Posts: n/a
Re: 4.0 L Core/Freeze Plugs
Dave Milne did pass the time by typing:
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
Spud Wrench
http://www.rastalltool.com/frame_middle/spud.asp
Although there are a few other names and not all
"spud wrenches" are that type.
Commonly used for high-iron/aligning bolt holes in beams and girders
where fingers dare not tread.
--
DougW
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing ( the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
Spud Wrench
http://www.rastalltool.com/frame_middle/spud.asp
Although there are a few other names and not all
"spud wrenches" are that type.
Commonly used for high-iron/aligning bolt holes in beams and girders
where fingers dare not tread.
--
DougW
#59
Guest
Posts: n/a
Re: 4.0 L Core/Freeze Plugs
I don't know but I have one with a hooked lever on the other end made by
Craftsman
"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:y5Frf.14716$iz3.13278@text.news.blueyonder.co .uk...
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing (
> the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
>
> Dave
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:rSZqf.31976$---.11008@dukeread07...
>> Quattro GR4 did pass the time by typing:
>> > DougW wrote:
>> >
>> >> flush, as in the outside edge is flush? That's not seated unless your
>> >> talking about a dome type plug. There has to be an edge for the plug
>> >> to
>> >> catch on.
>> >>
>> >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
> like.
>> >>
>> >> --
>> >> DougW
>> >
>> > You don't say! There in lies a good part of my problem. I will take
>> > the manifolds off again and reset these in like the picture (third time
>> > - I should be able to do this in 15 minutes LOL).
>> >
>> > I'm curious that the tool that is supposed to help me install these
>> > sets them exactly flush, not in-set like that picture. Live and learn.
>>
>> Does it look like this
>> http://www.sjdiscounttools.com/otc4603.html
>>
>> I just borrowed mine from the local AutoZone.
>>
>> --
>> DougW
>>
>>
>
>
Craftsman
"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:y5Frf.14716$iz3.13278@text.news.blueyonder.co .uk...
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing (
> the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
>
> Dave
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:rSZqf.31976$---.11008@dukeread07...
>> Quattro GR4 did pass the time by typing:
>> > DougW wrote:
>> >
>> >> flush, as in the outside edge is flush? That's not seated unless your
>> >> talking about a dome type plug. There has to be an edge for the plug
>> >> to
>> >> catch on.
>> >>
>> >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
> like.
>> >>
>> >> --
>> >> DougW
>> >
>> > You don't say! There in lies a good part of my problem. I will take
>> > the manifolds off again and reset these in like the picture (third time
>> > - I should be able to do this in 15 minutes LOL).
>> >
>> > I'm curious that the tool that is supposed to help me install these
>> > sets them exactly flush, not in-set like that picture. Live and learn.
>>
>> Does it look like this
>> http://www.sjdiscounttools.com/otc4603.html
>>
>> I just borrowed mine from the local AutoZone.
>>
>> --
>> DougW
>>
>>
>
>
#60
Guest
Posts: n/a
Re: 4.0 L Core/Freeze Plugs
I don't know but I have one with a hooked lever on the other end made by
Craftsman
"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:y5Frf.14716$iz3.13278@text.news.blueyonder.co .uk...
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing (
> the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
>
> Dave
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:rSZqf.31976$---.11008@dukeread07...
>> Quattro GR4 did pass the time by typing:
>> > DougW wrote:
>> >
>> >> flush, as in the outside edge is flush? That's not seated unless your
>> >> talking about a dome type plug. There has to be an edge for the plug
>> >> to
>> >> catch on.
>> >>
>> >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
> like.
>> >>
>> >> --
>> >> DougW
>> >
>> > You don't say! There in lies a good part of my problem. I will take
>> > the manifolds off again and reset these in like the picture (third time
>> > - I should be able to do this in 15 minutes LOL).
>> >
>> > I'm curious that the tool that is supposed to help me install these
>> > sets them exactly flush, not in-set like that picture. Live and learn.
>>
>> Does it look like this
>> http://www.sjdiscounttools.com/otc4603.html
>>
>> I just borrowed mine from the local AutoZone.
>>
>> --
>> DougW
>>
>>
>
>
Craftsman
"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:y5Frf.14716$iz3.13278@text.news.blueyonder.co .uk...
> well blow me - never knew you got kits for that. I've only ever used a
> mallet on an old socket to seat them, and a podger to remove 'em.
>
> Since, "podger" seems to be a british term, this is the sort of thing (
> the
> non spanner end is the podger bit )
> http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
> What do you call them ?
>
> Dave
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:rSZqf.31976$---.11008@dukeread07...
>> Quattro GR4 did pass the time by typing:
>> > DougW wrote:
>> >
>> >> flush, as in the outside edge is flush? That's not seated unless your
>> >> talking about a dome type plug. There has to be an edge for the plug
>> >> to
>> >> catch on.
>> >>
>> >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
> like.
>> >>
>> >> --
>> >> DougW
>> >
>> > You don't say! There in lies a good part of my problem. I will take
>> > the manifolds off again and reset these in like the picture (third time
>> > - I should be able to do this in 15 minutes LOL).
>> >
>> > I'm curious that the tool that is supposed to help me install these
>> > sets them exactly flush, not in-set like that picture. Live and learn.
>>
>> Does it look like this
>> http://www.sjdiscounttools.com/otc4603.html
>>
>> I just borrowed mine from the local AutoZone.
>>
>> --
>> DougW
>>
>>
>
>