DougW

Quattro GR4 did pass the time by typing:
> DougW wrote:
>
>> flush, as in the outside edge is flush? That's not seated unless your
>> talking about a dome type plug. There has to be an edge for the plug to
>> catch on.
>>
>> http://www.revbeergoggles.com/temp/plug.jpg is what they should look like.
>>
>> --
>> DougW
>
> You don't say! There in lies a good part of my problem. I will take
> the manifolds off again and reset these in like the picture (third time
> - I should be able to do this in 15 minutes LOL).
>
> I'm curious that the tool that is supposed to help me install these
> sets them exactly flush, not in-set like that picture. Live and learn.

Does it look like this
http://www.sjdiscounttools.com/otc4603.html

I just borrowed mine from the local AutoZone.

--
DougW

DougW

Quattro GR4 did pass the time by typing:
> DougW wrote:
>
>> flush, as in the outside edge is flush? That's not seated unless your
>> talking about a dome type plug. There has to be an edge for the plug to
>> catch on.
>>
>> http://www.revbeergoggles.com/temp/plug.jpg is what they should look like.
>>
>> --
>> DougW
>
> You don't say! There in lies a good part of my problem. I will take
> the manifolds off again and reset these in like the picture (third time
> - I should be able to do this in 15 minutes LOL).
>
> I'm curious that the tool that is supposed to help me install these
> sets them exactly flush, not in-set like that picture. Live and learn.

Does it look like this
http://www.sjdiscounttools.com/otc4603.html

I just borrowed mine from the local AutoZone.

--
DougW

DougW

Quattro GR4 did pass the time by typing:
> DougW wrote:
>
>> flush, as in the outside edge is flush? That's not seated unless your
>> talking about a dome type plug. There has to be an edge for the plug to
>> catch on.
>>
>> http://www.revbeergoggles.com/temp/plug.jpg is what they should look like.
>>
>> --
>> DougW
>
> You don't say! There in lies a good part of my problem. I will take
> the manifolds off again and reset these in like the picture (third time
> - I should be able to do this in 15 minutes LOL).
>
> I'm curious that the tool that is supposed to help me install these
> sets them exactly flush, not in-set like that picture. Live and learn.

Does it look like this
http://www.sjdiscounttools.com/otc4603.html

I just borrowed mine from the local AutoZone.

--
DougW

DougW

Mike Romain did pass the time by typing:
> DougW wrote:

>> http://www.revbeergoggles.com/temp/plug.jpg is what they should look like.

> LOL! Man is that 'ever' one reversing image! At first it looked like a
> plug in half way and inside out. I had to download it to look closer,
> then the aspect managed to change to look right....

I just looked at it again.. it's got to be the angle I took that photo at. :)

funky.

--
DougW

DougW

Mike Romain did pass the time by typing:
> DougW wrote:

>> http://www.revbeergoggles.com/temp/plug.jpg is what they should look like.

> LOL! Man is that 'ever' one reversing image! At first it looked like a
> plug in half way and inside out. I had to download it to look closer,
> then the aspect managed to change to look right....

I just looked at it again.. it's got to be the angle I took that photo at. :)

funky.

--
DougW

DougW

Mike Romain did pass the time by typing:
> DougW wrote:

>> http://www.revbeergoggles.com/temp/plug.jpg is what they should look like.

> LOL! Man is that 'ever' one reversing image! At first it looked like a
> plug in half way and inside out. I had to download it to look closer,
> then the aspect managed to change to look right....

I just looked at it again.. it's got to be the angle I took that photo at. :)

funky.

--
DougW

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

I don't see how you could show the lip any other way.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

DougW wrote:
>
> I just looked at it again.. it's got to be the angle I took that photo at. :)
>
> funky.
>
> --
> DougW

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

I don't see how you could show the lip any other way.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

DougW wrote:
>
> I just looked at it again.. it's got to be the angle I took that photo at. :)
>
> funky.
>
> --
> DougW

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

I don't see how you could show the lip any other way.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

DougW wrote:
>
> I just looked at it again.. it's got to be the angle I took that photo at. :)
>
> funky.
>
> --
> DougW

Dave Milne

well blow me - never knew you got kits for that. I've only ever used a
mallet on an old socket to seat them, and a podger to remove 'em.

Since, "podger" seems to be a british term, this is the sort of thing ( the
non spanner end is the podger bit )
http://cgi.ebay.co.uk/Britool-30mm-P...QQcmdZViewItem
What do you call them ?

Dave


"DougW" <post.replies@invalid.address> wrote in message
news:rSZqf.31976$---.11008@dukeread07...
> Quattro GR4 did pass the time by typing:
> > DougW wrote:
> >
> >> flush, as in the outside edge is flush? That's not seated unless your
> >> talking about a dome type plug. There has to be an edge for the plug to
> >> catch on.
> >>
> >> http://www.revbeergoggles.com/temp/plug.jpg is what they should look
like.
> >>
> >> --
> >> DougW
> >
> > You don't say! There in lies a good part of my problem. I will take
> > the manifolds off again and reset these in like the picture (third time
> > - I should be able to do this in 15 minutes LOL).
> >
> > I'm curious that the tool that is supposed to help me install these
> > sets them exactly flush, not in-set like that picture. Live and learn.
>
> Does it look like this
> http://www.sjdiscounttools.com/otc4603.html
>
> I just borrowed mine from the local AutoZone.
>
> --
> DougW
>
>