360 v8 Compression check
Guest
Posts: n/a
Re: 360 v8 Compression check
Ditto: http://www.georgiazclub.com/tips/ztech/comptest.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> Dave,
>
> The first thing you are looking for is uniformity across all cylinders,
> which you have. I wouldn't worry.
>
> Earle
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> Dave,
>
> The first thing you are looking for is uniformity across all cylinders,
> which you have. I wouldn't worry.
>
> Earle
Guest
Posts: n/a
Re: 360 v8 Compression check
Ditto: http://www.georgiazclub.com/tips/ztech/comptest.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> Dave,
>
> The first thing you are looking for is uniformity across all cylinders,
> which you have. I wouldn't worry.
>
> Earle
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> Dave,
>
> The first thing you are looking for is uniformity across all cylinders,
> which you have. I wouldn't worry.
>
> Earle
Guest
Posts: n/a
Re: 360 v8 Compression check
Got it, thanks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:c0a99$452950ab$422afc51$6216@FUSE.NET...
> I've tried three times and I got a send failure message twice and once it
> was rejected by MY server...
>
> I'm going to reboot and see if that clears anything up.
>
>
> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> news:4ecWg.31511$r61.7076@text.news.blueyonder.co. uk...
> > That's what I would have expected. Will await your email !
> > Cheers,
> >
> > Dave.
> >
> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> > news:b66ab$45294d04$422afc51$4132@FUSE.NET...
> >> 140 psi minimum @ 8.25:1 compression ratio
> >>
> >> I'm sending it to you (e-mail) as a PDF file
> >>
> >>
> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> news:KYbWg.31485$r61.18021@text.news.blueyonder.co .uk...
> >> > Yes, that's the one. Can't see the compression ratio on the sheet,
but
> >> > I
> >> > gather I should have had the throttle open which I didn't.
> >> >
> >> > Dave
> >> >
> >> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> >> > news:bf3f2$45294873$422afc51$312@FUSE.NET...
> >> >> That has the AMC 360 right?
> >> >>
> >> >> http://amccf.com/tech/v8_specs.html
> >> >>
> >> >>
> >> >>
> >> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> >> news:8c7Wg.31235$r61.2601@text.news.blueyonder.co. uk...
> >> >> > Any one got the specs for a compression check on a 360 v8 '91 ?
> >> >> >
> >> >> > I'm only getting 8 bar (~ 115 psi) pretty consistently across all
> >> >> > cylinders.
> >> >> > I would have expected about 140-160 psi and am a bit surprised it
is
> > so
> >> >> > consisently low. That was a dry test - didn't do a wet one.
> >> >> >
> >> >> > Dave Milne, Scotland '91 Wagoneer
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
> >
> >
>
>
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:c0a99$452950ab$422afc51$6216@FUSE.NET...
> I've tried three times and I got a send failure message twice and once it
> was rejected by MY server...
>
> I'm going to reboot and see if that clears anything up.
>
>
> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> news:4ecWg.31511$r61.7076@text.news.blueyonder.co. uk...
> > That's what I would have expected. Will await your email !
> > Cheers,
> >
> > Dave.
> >
> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> > news:b66ab$45294d04$422afc51$4132@FUSE.NET...
> >> 140 psi minimum @ 8.25:1 compression ratio
> >>
> >> I'm sending it to you (e-mail) as a PDF file
> >>
> >>
> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> news:KYbWg.31485$r61.18021@text.news.blueyonder.co .uk...
> >> > Yes, that's the one. Can't see the compression ratio on the sheet,
but
> >> > I
> >> > gather I should have had the throttle open which I didn't.
> >> >
> >> > Dave
> >> >
> >> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> >> > news:bf3f2$45294873$422afc51$312@FUSE.NET...
> >> >> That has the AMC 360 right?
> >> >>
> >> >> http://amccf.com/tech/v8_specs.html
> >> >>
> >> >>
> >> >>
> >> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> >> news:8c7Wg.31235$r61.2601@text.news.blueyonder.co. uk...
> >> >> > Any one got the specs for a compression check on a 360 v8 '91 ?
> >> >> >
> >> >> > I'm only getting 8 bar (~ 115 psi) pretty consistently across all
> >> >> > cylinders.
> >> >> > I would have expected about 140-160 psi and am a bit surprised it
is
> > so
> >> >> > consisently low. That was a dry test - didn't do a wet one.
> >> >> >
> >> >> > Dave Milne, Scotland '91 Wagoneer
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
> >
> >
>
>
Guest
Posts: n/a
Re: 360 v8 Compression check
Got it, thanks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:c0a99$452950ab$422afc51$6216@FUSE.NET...
> I've tried three times and I got a send failure message twice and once it
> was rejected by MY server...
>
> I'm going to reboot and see if that clears anything up.
>
>
> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> news:4ecWg.31511$r61.7076@text.news.blueyonder.co. uk...
> > That's what I would have expected. Will await your email !
> > Cheers,
> >
> > Dave.
> >
> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> > news:b66ab$45294d04$422afc51$4132@FUSE.NET...
> >> 140 psi minimum @ 8.25:1 compression ratio
> >>
> >> I'm sending it to you (e-mail) as a PDF file
> >>
> >>
> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> news:KYbWg.31485$r61.18021@text.news.blueyonder.co .uk...
> >> > Yes, that's the one. Can't see the compression ratio on the sheet,
but
> >> > I
> >> > gather I should have had the throttle open which I didn't.
> >> >
> >> > Dave
> >> >
> >> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> >> > news:bf3f2$45294873$422afc51$312@FUSE.NET...
> >> >> That has the AMC 360 right?
> >> >>
> >> >> http://amccf.com/tech/v8_specs.html
> >> >>
> >> >>
> >> >>
> >> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> >> news:8c7Wg.31235$r61.2601@text.news.blueyonder.co. uk...
> >> >> > Any one got the specs for a compression check on a 360 v8 '91 ?
> >> >> >
> >> >> > I'm only getting 8 bar (~ 115 psi) pretty consistently across all
> >> >> > cylinders.
> >> >> > I would have expected about 140-160 psi and am a bit surprised it
is
> > so
> >> >> > consisently low. That was a dry test - didn't do a wet one.
> >> >> >
> >> >> > Dave Milne, Scotland '91 Wagoneer
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
> >
> >
>
>
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:c0a99$452950ab$422afc51$6216@FUSE.NET...
> I've tried three times and I got a send failure message twice and once it
> was rejected by MY server...
>
> I'm going to reboot and see if that clears anything up.
>
>
> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> news:4ecWg.31511$r61.7076@text.news.blueyonder.co. uk...
> > That's what I would have expected. Will await your email !
> > Cheers,
> >
> > Dave.
> >
> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> > news:b66ab$45294d04$422afc51$4132@FUSE.NET...
> >> 140 psi minimum @ 8.25:1 compression ratio
> >>
> >> I'm sending it to you (e-mail) as a PDF file
> >>
> >>
> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> news:KYbWg.31485$r61.18021@text.news.blueyonder.co .uk...
> >> > Yes, that's the one. Can't see the compression ratio on the sheet,
but
> >> > I
> >> > gather I should have had the throttle open which I didn't.
> >> >
> >> > Dave
> >> >
> >> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> >> > news:bf3f2$45294873$422afc51$312@FUSE.NET...
> >> >> That has the AMC 360 right?
> >> >>
> >> >> http://amccf.com/tech/v8_specs.html
> >> >>
> >> >>
> >> >>
> >> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> >> news:8c7Wg.31235$r61.2601@text.news.blueyonder.co. uk...
> >> >> > Any one got the specs for a compression check on a 360 v8 '91 ?
> >> >> >
> >> >> > I'm only getting 8 bar (~ 115 psi) pretty consistently across all
> >> >> > cylinders.
> >> >> > I would have expected about 140-160 psi and am a bit surprised it
is
> > so
> >> >> > consisently low. That was a dry test - didn't do a wet one.
> >> >> >
> >> >> > Dave Milne, Scotland '91 Wagoneer
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
> >
> >
>
>
Guest
Posts: n/a
Re: 360 v8 Compression check
Got it, thanks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:c0a99$452950ab$422afc51$6216@FUSE.NET...
> I've tried three times and I got a send failure message twice and once it
> was rejected by MY server...
>
> I'm going to reboot and see if that clears anything up.
>
>
> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> news:4ecWg.31511$r61.7076@text.news.blueyonder.co. uk...
> > That's what I would have expected. Will await your email !
> > Cheers,
> >
> > Dave.
> >
> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> > news:b66ab$45294d04$422afc51$4132@FUSE.NET...
> >> 140 psi minimum @ 8.25:1 compression ratio
> >>
> >> I'm sending it to you (e-mail) as a PDF file
> >>
> >>
> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> news:KYbWg.31485$r61.18021@text.news.blueyonder.co .uk...
> >> > Yes, that's the one. Can't see the compression ratio on the sheet,
but
> >> > I
> >> > gather I should have had the throttle open which I didn't.
> >> >
> >> > Dave
> >> >
> >> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> >> > news:bf3f2$45294873$422afc51$312@FUSE.NET...
> >> >> That has the AMC 360 right?
> >> >>
> >> >> http://amccf.com/tech/v8_specs.html
> >> >>
> >> >>
> >> >>
> >> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> >> news:8c7Wg.31235$r61.2601@text.news.blueyonder.co. uk...
> >> >> > Any one got the specs for a compression check on a 360 v8 '91 ?
> >> >> >
> >> >> > I'm only getting 8 bar (~ 115 psi) pretty consistently across all
> >> >> > cylinders.
> >> >> > I would have expected about 140-160 psi and am a bit surprised it
is
> > so
> >> >> > consisently low. That was a dry test - didn't do a wet one.
> >> >> >
> >> >> > Dave Milne, Scotland '91 Wagoneer
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
> >
> >
>
>
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:c0a99$452950ab$422afc51$6216@FUSE.NET...
> I've tried three times and I got a send failure message twice and once it
> was rejected by MY server...
>
> I'm going to reboot and see if that clears anything up.
>
>
> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> news:4ecWg.31511$r61.7076@text.news.blueyonder.co. uk...
> > That's what I would have expected. Will await your email !
> > Cheers,
> >
> > Dave.
> >
> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> > news:b66ab$45294d04$422afc51$4132@FUSE.NET...
> >> 140 psi minimum @ 8.25:1 compression ratio
> >>
> >> I'm sending it to you (e-mail) as a PDF file
> >>
> >>
> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> news:KYbWg.31485$r61.18021@text.news.blueyonder.co .uk...
> >> > Yes, that's the one. Can't see the compression ratio on the sheet,
but
> >> > I
> >> > gather I should have had the throttle open which I didn't.
> >> >
> >> > Dave
> >> >
> >> > "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> >> > news:bf3f2$45294873$422afc51$312@FUSE.NET...
> >> >> That has the AMC 360 right?
> >> >>
> >> >> http://amccf.com/tech/v8_specs.html
> >> >>
> >> >>
> >> >>
> >> >> "Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
> >> >> news:8c7Wg.31235$r61.2601@text.news.blueyonder.co. uk...
> >> >> > Any one got the specs for a compression check on a 360 v8 '91 ?
> >> >> >
> >> >> > I'm only getting 8 bar (~ 115 psi) pretty consistently across all
> >> >> > cylinders.
> >> >> > I would have expected about 140-160 psi and am a bit surprised it
is
> > so
> >> >> > consisently low. That was a dry test - didn't do a wet one.
> >> >> >
> >> >> > Dave Milne, Scotland '91 Wagoneer
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
> >
> >
>
>
Thread
Thread Starter
Forum
Replies
Last Post
William Oliveri
Jeep Mailing List
48
Feb 11, 2004 01:19 PM
William Oliveri
Jeep Mailing List
84
Jan 19, 2004 02:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)