351w into a CJ7
06-14-2005, 06:29 PM
#1
Guest
Posts: n/a
351w into a CJ7
Hi all,
I know the 302w swap into a CJ has been done quite a bit and was wondering
if the 351w will go in just as well. I know the motor mounts are the same
on both blocks, my biggest concern is header clearance.
Has anyone done this swap?
Thanks for any info!
Mike D.
85 CJ7
I know the 302w swap into a CJ has been done quite a bit and was wondering
if the 351w will go in just as well. I know the motor mounts are the same
on both blocks, my biggest concern is header clearance.
Has anyone done this swap?
Thanks for any info!
Mike D.
85 CJ7
06-14-2005, 07:09 PM
#2
Guest
Posts: n/a
Re: 351w into a CJ7
I've alway thought of the Windsor heads as the small ones that
originally came on the 260" and the Cleveland or Modified as the bigger
heads used on the same small block taking it out to 400". Sure you'll
have plenty of room. It'll bolt straight in with a little help form:
http://www.advanceadapters.com/catalog/003.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Duane Jr." wrote:
>
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
originally came on the 260" and the Cleveland or Modified as the bigger
heads used on the same small block taking it out to 400". Sure you'll
have plenty of room. It'll bolt straight in with a little help form:
http://www.advanceadapters.com/catalog/003.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Duane Jr." wrote:
>
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
06-14-2005, 07:09 PM
#3
Guest
Posts: n/a
Re: 351w into a CJ7
I've alway thought of the Windsor heads as the small ones that
originally came on the 260" and the Cleveland or Modified as the bigger
heads used on the same small block taking it out to 400". Sure you'll
have plenty of room. It'll bolt straight in with a little help form:
http://www.advanceadapters.com/catalog/003.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Duane Jr." wrote:
>
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
originally came on the 260" and the Cleveland or Modified as the bigger
heads used on the same small block taking it out to 400". Sure you'll
have plenty of room. It'll bolt straight in with a little help form:
http://www.advanceadapters.com/catalog/003.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Duane Jr." wrote:
>
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
06-14-2005, 07:09 PM
#4
Guest
Posts: n/a
Re: 351w into a CJ7
I've alway thought of the Windsor heads as the small ones that
originally came on the 260" and the Cleveland or Modified as the bigger
heads used on the same small block taking it out to 400". Sure you'll
have plenty of room. It'll bolt straight in with a little help form:
http://www.advanceadapters.com/catalog/003.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Duane Jr." wrote:
>
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
originally came on the 260" and the Cleveland or Modified as the bigger
heads used on the same small block taking it out to 400". Sure you'll
have plenty of room. It'll bolt straight in with a little help form:
http://www.advanceadapters.com/catalog/003.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Duane Jr." wrote:
>
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
06-14-2005, 07:09 PM
#5
Guest
Posts: n/a
Re: 351w into a CJ7
I've alway thought of the Windsor heads as the small ones that
originally came on the 260" and the Cleveland or Modified as the bigger
heads used on the same small block taking it out to 400". Sure you'll
have plenty of room. It'll bolt straight in with a little help form:
http://www.advanceadapters.com/catalog/003.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Duane Jr." wrote:
>
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
originally came on the 260" and the Cleveland or Modified as the bigger
heads used on the same small block taking it out to 400". Sure you'll
have plenty of room. It'll bolt straight in with a little help form:
http://www.advanceadapters.com/catalog/003.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Mike Duane Jr." wrote:
>
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
06-14-2005, 07:22 PM
#6
Guest
Posts: n/a
Re: 351w into a CJ7
A good start
http://www.novak-adapt.com/knowledge...es_general.htm
--
Coasty
Semper Paratus
(Always Ready)
"Mike Duane Jr." <mduane3AT@***.net> wrote in message
news:Xns9675BC25D364Dmduane3homecom@68.1.17.6...
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
http://www.novak-adapt.com/knowledge...es_general.htm
--
Coasty
Semper Paratus
(Always Ready)
"Mike Duane Jr." <mduane3AT@***.net> wrote in message
news:Xns9675BC25D364Dmduane3homecom@68.1.17.6...
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
06-14-2005, 07:22 PM
#7
Guest
Posts: n/a
Re: 351w into a CJ7
A good start
http://www.novak-adapt.com/knowledge...es_general.htm
--
Coasty
Semper Paratus
(Always Ready)
"Mike Duane Jr." <mduane3AT@***.net> wrote in message
news:Xns9675BC25D364Dmduane3homecom@68.1.17.6...
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
http://www.novak-adapt.com/knowledge...es_general.htm
--
Coasty
Semper Paratus
(Always Ready)
"Mike Duane Jr." <mduane3AT@***.net> wrote in message
news:Xns9675BC25D364Dmduane3homecom@68.1.17.6...
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
06-14-2005, 07:22 PM
#8
Guest
Posts: n/a
Re: 351w into a CJ7
A good start
http://www.novak-adapt.com/knowledge...es_general.htm
--
Coasty
Semper Paratus
(Always Ready)
"Mike Duane Jr." <mduane3AT@***.net> wrote in message
news:Xns9675BC25D364Dmduane3homecom@68.1.17.6...
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
http://www.novak-adapt.com/knowledge...es_general.htm
--
Coasty
Semper Paratus
(Always Ready)
"Mike Duane Jr." <mduane3AT@***.net> wrote in message
news:Xns9675BC25D364Dmduane3homecom@68.1.17.6...
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
06-14-2005, 07:22 PM
#9
Guest
Posts: n/a
Re: 351w into a CJ7
A good start
http://www.novak-adapt.com/knowledge...es_general.htm
--
Coasty
Semper Paratus
(Always Ready)
"Mike Duane Jr." <mduane3AT@***.net> wrote in message
news:Xns9675BC25D364Dmduane3homecom@68.1.17.6...
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
http://www.novak-adapt.com/knowledge...es_general.htm
--
Coasty
Semper Paratus
(Always Ready)
"Mike Duane Jr." <mduane3AT@***.net> wrote in message
news:Xns9675BC25D364Dmduane3homecom@68.1.17.6...
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7
Thread
Thread Starter
Forum
Replies
Last Post
Mike Romain
Jeep Mailing List
8
07-26-2007 06:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)