Steve

Yes. 15x7 works too and will hold a bead better if you air down. You can
fit 33x10.50 on your stock 15x7 with just a little rubbing on the lower
control arms when steering hard over. Easily corrected by adjusting
steering stops. If you get new wheels look for 4.5" or 4.75" back spacing.

Also, with the 4.5" lift you'll need to trim the fenders a bit and
remove the plastic crap that hangs under the front bumper to clear
33x10.50 but you can retain your stock flares in the stock position.

Steve
http://xjeep.dyndns.org

Carl Saiyed wrote:
> Thanks Mike and Steve. I'll probably be going to a 15x8 wheel at the same
> time. Can I fit a 33x10.5 on a 15x8?
>
> Carl

Steve

Yes. 15x7 works too and will hold a bead better if you air down. You can
fit 33x10.50 on your stock 15x7 with just a little rubbing on the lower
control arms when steering hard over. Easily corrected by adjusting
steering stops. If you get new wheels look for 4.5" or 4.75" back spacing.

Also, with the 4.5" lift you'll need to trim the fenders a bit and
remove the plastic crap that hangs under the front bumper to clear
33x10.50 but you can retain your stock flares in the stock position.

Steve
http://xjeep.dyndns.org

Carl Saiyed wrote:
> Thanks Mike and Steve. I'll probably be going to a 15x8 wheel at the same
> time. Can I fit a 33x10.5 on a 15x8?
>
> Carl

Steve

Yes. 15x7 works too and will hold a bead better if you air down. You can
fit 33x10.50 on your stock 15x7 with just a little rubbing on the lower
control arms when steering hard over. Easily corrected by adjusting
steering stops. If you get new wheels look for 4.5" or 4.75" back spacing.

Also, with the 4.5" lift you'll need to trim the fenders a bit and
remove the plastic crap that hangs under the front bumper to clear
33x10.50 but you can retain your stock flares in the stock position.

Steve
http://xjeep.dyndns.org

Carl Saiyed wrote:
> Thanks Mike and Steve. I'll probably be going to a 15x8 wheel at the same
> time. Can I fit a 33x10.5 on a 15x8?
>
> Carl