318 VS 4.0 springs
03-07-2007, 11:23 AM
#1
Guest
Posts: n/a
318 VS 4.0 springs
does anyone know if there is a diffrence between the front coil
springs used with the 318 and 4.0 engines? i have a 94' ZJ, and i am
fabricating a stinger style front bumper. im not sure, but i think
that it will weigh in the neighborhood of 100-150 lbs. i have the
4.0, and i figured that since the 318 weighs about 200lbs more than
the 4.0, it would fix a lot of problems related to front-end weight to
simply exchange the springs. any ideas? suggestions?
springs used with the 318 and 4.0 engines? i have a 94' ZJ, and i am
fabricating a stinger style front bumper. im not sure, but i think
that it will weigh in the neighborhood of 100-150 lbs. i have the
4.0, and i figured that since the 318 weighs about 200lbs more than
the 4.0, it would fix a lot of problems related to front-end weight to
simply exchange the springs. any ideas? suggestions?
03-07-2007, 07:15 PM
#2
Guest
Posts: n/a
Re: 318 VS 4.0 springs
petethepirate wrote:
> does anyone know if there is a diffrence between the front coil
> springs used with the 318 and 4.0 engines? i have a 94' ZJ, and i am
> fabricating a stinger style front bumper. im not sure, but i think
> that it will weigh in the neighborhood of 100-150 lbs. i have the
> 4.0, and i figured that since the 318 weighs about 200lbs more than
> the 4.0, it would fix a lot of problems related to front-end weight to
> simply exchange the springs. any ideas? suggestions?
There are two basic springs. The 4.0 and up-country
Might have been another for the V8, but for the 4.0 there
were two.
I'd say get the OEM up-country springs or similar aftermarket.
You might also consider a 1" spacer
--
DougW
> does anyone know if there is a diffrence between the front coil
> springs used with the 318 and 4.0 engines? i have a 94' ZJ, and i am
> fabricating a stinger style front bumper. im not sure, but i think
> that it will weigh in the neighborhood of 100-150 lbs. i have the
> 4.0, and i figured that since the 318 weighs about 200lbs more than
> the 4.0, it would fix a lot of problems related to front-end weight to
> simply exchange the springs. any ideas? suggestions?
There are two basic springs. The 4.0 and up-country
Might have been another for the V8, but for the 4.0 there
were two.
I'd say get the OEM up-country springs or similar aftermarket.
You might also consider a 1" spacer
--
DougW
03-07-2007, 07:15 PM
#3
Guest
Posts: n/a
Re: 318 VS 4.0 springs
petethepirate wrote:
> does anyone know if there is a diffrence between the front coil
> springs used with the 318 and 4.0 engines? i have a 94' ZJ, and i am
> fabricating a stinger style front bumper. im not sure, but i think
> that it will weigh in the neighborhood of 100-150 lbs. i have the
> 4.0, and i figured that since the 318 weighs about 200lbs more than
> the 4.0, it would fix a lot of problems related to front-end weight to
> simply exchange the springs. any ideas? suggestions?
There are two basic springs. The 4.0 and up-country
Might have been another for the V8, but for the 4.0 there
were two.
I'd say get the OEM up-country springs or similar aftermarket.
You might also consider a 1" spacer
--
DougW
> does anyone know if there is a diffrence between the front coil
> springs used with the 318 and 4.0 engines? i have a 94' ZJ, and i am
> fabricating a stinger style front bumper. im not sure, but i think
> that it will weigh in the neighborhood of 100-150 lbs. i have the
> 4.0, and i figured that since the 318 weighs about 200lbs more than
> the 4.0, it would fix a lot of problems related to front-end weight to
> simply exchange the springs. any ideas? suggestions?
There are two basic springs. The 4.0 and up-country
Might have been another for the V8, but for the 4.0 there
were two.
I'd say get the OEM up-country springs or similar aftermarket.
You might also consider a 1" spacer
--
DougW
03-07-2007, 07:15 PM
#4
Guest
Posts: n/a
Re: 318 VS 4.0 springs
petethepirate wrote:
> does anyone know if there is a diffrence between the front coil
> springs used with the 318 and 4.0 engines? i have a 94' ZJ, and i am
> fabricating a stinger style front bumper. im not sure, but i think
> that it will weigh in the neighborhood of 100-150 lbs. i have the
> 4.0, and i figured that since the 318 weighs about 200lbs more than
> the 4.0, it would fix a lot of problems related to front-end weight to
> simply exchange the springs. any ideas? suggestions?
There are two basic springs. The 4.0 and up-country
Might have been another for the V8, but for the 4.0 there
were two.
I'd say get the OEM up-country springs or similar aftermarket.
You might also consider a 1" spacer
--
DougW
> does anyone know if there is a diffrence between the front coil
> springs used with the 318 and 4.0 engines? i have a 94' ZJ, and i am
> fabricating a stinger style front bumper. im not sure, but i think
> that it will weigh in the neighborhood of 100-150 lbs. i have the
> 4.0, and i figured that since the 318 weighs about 200lbs more than
> the 4.0, it would fix a lot of problems related to front-end weight to
> simply exchange the springs. any ideas? suggestions?
There are two basic springs. The 4.0 and up-country
Might have been another for the V8, but for the 4.0 there
were two.
I'd say get the OEM up-country springs or similar aftermarket.
You might also consider a 1" spacer
--
DougW
03-09-2007, 08:07 PM
#5
Guest
Posts: n/a
Re: 318 VS 4.0 springs
> does anyone know if there is a diffrence between the front coil
> springs used with the 318 and 4.0 engines? i have a 94' ZJ...
The ZJ's used taller springs in the front for the V8's and taller still for
the Upcountry package. By my calculations that equals four different front
springs and two different rears, unless the I6 Upcountry front springs are
the same as the V8 standard springs in which case there are three different
fronts.
You could also stick a coil spacer above the front springs to compensate for
the added weight. Just another option.
--
Posted via a free Usenet account from http://www.teranews.com
> springs used with the 318 and 4.0 engines? i have a 94' ZJ...
The ZJ's used taller springs in the front for the V8's and taller still for
the Upcountry package. By my calculations that equals four different front
springs and two different rears, unless the I6 Upcountry front springs are
the same as the V8 standard springs in which case there are three different
fronts.
You could also stick a coil spacer above the front springs to compensate for
the added weight. Just another option.
--
Posted via a free Usenet account from http://www.teranews.com
03-09-2007, 08:07 PM
#6
Guest
Posts: n/a
Re: 318 VS 4.0 springs
> does anyone know if there is a diffrence between the front coil
> springs used with the 318 and 4.0 engines? i have a 94' ZJ...
The ZJ's used taller springs in the front for the V8's and taller still for
the Upcountry package. By my calculations that equals four different front
springs and two different rears, unless the I6 Upcountry front springs are
the same as the V8 standard springs in which case there are three different
fronts.
You could also stick a coil spacer above the front springs to compensate for
the added weight. Just another option.
--
Posted via a free Usenet account from http://www.teranews.com
> springs used with the 318 and 4.0 engines? i have a 94' ZJ...
The ZJ's used taller springs in the front for the V8's and taller still for
the Upcountry package. By my calculations that equals four different front
springs and two different rears, unless the I6 Upcountry front springs are
the same as the V8 standard springs in which case there are three different
fronts.
You could also stick a coil spacer above the front springs to compensate for
the added weight. Just another option.
--
Posted via a free Usenet account from http://www.teranews.com
03-09-2007, 08:07 PM
#7
Guest
Posts: n/a
Re: 318 VS 4.0 springs
> does anyone know if there is a diffrence between the front coil
> springs used with the 318 and 4.0 engines? i have a 94' ZJ...
The ZJ's used taller springs in the front for the V8's and taller still for
the Upcountry package. By my calculations that equals four different front
springs and two different rears, unless the I6 Upcountry front springs are
the same as the V8 standard springs in which case there are three different
fronts.
You could also stick a coil spacer above the front springs to compensate for
the added weight. Just another option.
--
Posted via a free Usenet account from http://www.teranews.com
> springs used with the 318 and 4.0 engines? i have a 94' ZJ...
The ZJ's used taller springs in the front for the V8's and taller still for
the Upcountry package. By my calculations that equals four different front
springs and two different rears, unless the I6 Upcountry front springs are
the same as the V8 standard springs in which case there are three different
fronts.
You could also stick a coil spacer above the front springs to compensate for
the added weight. Just another option.
--
Posted via a free Usenet account from http://www.teranews.com
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)