258 Valve cover gasket question
#41
Guest
Posts: n/a
Re: 258 Valve cover gasket question
Since when is Brit synonymous with Canadian? (Bet you can't pronounce that
one either).
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40939C33.B3709C24@sympatico.ca...
> Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Steve G wrote:
> >
> > No, you did not spell that right, it's aluminum, not aluminium.
> > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > Hi,
> > >
> > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
> > original
> > > valve cover was made of plastic but the one I have is made of
aluminium
> > (did
> > > I spell that right).
> > >
> > > If I'm correct in my assumptions above, will a regular NAPA gasket
work
> > with
> > > this valve cover or do I need to find a gasket made for this
particular
> > > valve cover?
> > >
> > > Thanks,
> > > Nelson
> > > '89 YJ
> > >
> > >
one either).
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40939C33.B3709C24@sympatico.ca...
> Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Steve G wrote:
> >
> > No, you did not spell that right, it's aluminum, not aluminium.
> > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > Hi,
> > >
> > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
> > original
> > > valve cover was made of plastic but the one I have is made of
aluminium
> > (did
> > > I spell that right).
> > >
> > > If I'm correct in my assumptions above, will a regular NAPA gasket
work
> > with
> > > this valve cover or do I need to find a gasket made for this
particular
> > > valve cover?
> > >
> > > Thanks,
> > > Nelson
> > > '89 YJ
> > >
> > >
#42
Guest
Posts: n/a
Re: 258 Valve cover gasket question
Only in the dictionary...
We still spell Brit up here on most things...
My spell checker is always pissing me off when I know I have the right
spelling...
Mike
Steve G wrote:
>
> Since when is Brit synonymous with Canadian? (Bet you can't pronounce that
> one either).
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40939C33.B3709C24@sympatico.ca...
> > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Steve G wrote:
> > >
> > > No, you did not spell that right, it's aluminum, not aluminium.
> > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > Hi,
> > > >
> > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
> > > original
> > > > valve cover was made of plastic but the one I have is made of
> aluminium
> > > (did
> > > > I spell that right).
> > > >
> > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> work
> > > with
> > > > this valve cover or do I need to find a gasket made for this
> particular
> > > > valve cover?
> > > >
> > > > Thanks,
> > > > Nelson
> > > > '89 YJ
> > > >
> > > >
We still spell Brit up here on most things...
My spell checker is always pissing me off when I know I have the right
spelling...
Mike
Steve G wrote:
>
> Since when is Brit synonymous with Canadian? (Bet you can't pronounce that
> one either).
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40939C33.B3709C24@sympatico.ca...
> > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Steve G wrote:
> > >
> > > No, you did not spell that right, it's aluminum, not aluminium.
> > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > Hi,
> > > >
> > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
> > > original
> > > > valve cover was made of plastic but the one I have is made of
> aluminium
> > > (did
> > > > I spell that right).
> > > >
> > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> work
> > > with
> > > > this valve cover or do I need to find a gasket made for this
> particular
> > > > valve cover?
> > > >
> > > > Thanks,
> > > > Nelson
> > > > '89 YJ
> > > >
> > > >
#43
Guest
Posts: n/a
Re: 258 Valve cover gasket question
Only in the dictionary...
We still spell Brit up here on most things...
My spell checker is always pissing me off when I know I have the right
spelling...
Mike
Steve G wrote:
>
> Since when is Brit synonymous with Canadian? (Bet you can't pronounce that
> one either).
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40939C33.B3709C24@sympatico.ca...
> > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Steve G wrote:
> > >
> > > No, you did not spell that right, it's aluminum, not aluminium.
> > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > Hi,
> > > >
> > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
> > > original
> > > > valve cover was made of plastic but the one I have is made of
> aluminium
> > > (did
> > > > I spell that right).
> > > >
> > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> work
> > > with
> > > > this valve cover or do I need to find a gasket made for this
> particular
> > > > valve cover?
> > > >
> > > > Thanks,
> > > > Nelson
> > > > '89 YJ
> > > >
> > > >
We still spell Brit up here on most things...
My spell checker is always pissing me off when I know I have the right
spelling...
Mike
Steve G wrote:
>
> Since when is Brit synonymous with Canadian? (Bet you can't pronounce that
> one either).
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40939C33.B3709C24@sympatico.ca...
> > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Steve G wrote:
> > >
> > > No, you did not spell that right, it's aluminum, not aluminium.
> > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > Hi,
> > > >
> > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
> > > original
> > > > valve cover was made of plastic but the one I have is made of
> aluminium
> > > (did
> > > > I spell that right).
> > > >
> > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> work
> > > with
> > > > this valve cover or do I need to find a gasket made for this
> particular
> > > > valve cover?
> > > >
> > > > Thanks,
> > > > Nelson
> > > > '89 YJ
> > > >
> > > >
#44
Guest
Posts: n/a
Re: 258 Valve cover gasket question
Only in the dictionary...
We still spell Brit up here on most things...
My spell checker is always pissing me off when I know I have the right
spelling...
Mike
Steve G wrote:
>
> Since when is Brit synonymous with Canadian? (Bet you can't pronounce that
> one either).
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40939C33.B3709C24@sympatico.ca...
> > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Steve G wrote:
> > >
> > > No, you did not spell that right, it's aluminum, not aluminium.
> > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > Hi,
> > > >
> > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
> > > original
> > > > valve cover was made of plastic but the one I have is made of
> aluminium
> > > (did
> > > > I spell that right).
> > > >
> > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> work
> > > with
> > > > this valve cover or do I need to find a gasket made for this
> particular
> > > > valve cover?
> > > >
> > > > Thanks,
> > > > Nelson
> > > > '89 YJ
> > > >
> > > >
We still spell Brit up here on most things...
My spell checker is always pissing me off when I know I have the right
spelling...
Mike
Steve G wrote:
>
> Since when is Brit synonymous with Canadian? (Bet you can't pronounce that
> one either).
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40939C33.B3709C24@sympatico.ca...
> > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Steve G wrote:
> > >
> > > No, you did not spell that right, it's aluminum, not aluminium.
> > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > Hi,
> > > >
> > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
> > > original
> > > > valve cover was made of plastic but the one I have is made of
> aluminium
> > > (did
> > > > I spell that right).
> > > >
> > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> work
> > > with
> > > > this valve cover or do I need to find a gasket made for this
> particular
> > > > valve cover?
> > > >
> > > > Thanks,
> > > > Nelson
> > > > '89 YJ
> > > >
> > > >
#45
Guest
Posts: n/a
Re: 258 Valve cover gasket question
Only in the dictionary...
We still spell Brit up here on most things...
My spell checker is always pissing me off when I know I have the right
spelling...
Mike
Steve G wrote:
>
> Since when is Brit synonymous with Canadian? (Bet you can't pronounce that
> one either).
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40939C33.B3709C24@sympatico.ca...
> > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Steve G wrote:
> > >
> > > No, you did not spell that right, it's aluminum, not aluminium.
> > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > Hi,
> > > >
> > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
> > > original
> > > > valve cover was made of plastic but the one I have is made of
> aluminium
> > > (did
> > > > I spell that right).
> > > >
> > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> work
> > > with
> > > > this valve cover or do I need to find a gasket made for this
> particular
> > > > valve cover?
> > > >
> > > > Thanks,
> > > > Nelson
> > > > '89 YJ
> > > >
> > > >
We still spell Brit up here on most things...
My spell checker is always pissing me off when I know I have the right
spelling...
Mike
Steve G wrote:
>
> Since when is Brit synonymous with Canadian? (Bet you can't pronounce that
> one either).
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40939C33.B3709C24@sympatico.ca...
> > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Steve G wrote:
> > >
> > > No, you did not spell that right, it's aluminum, not aluminium.
> > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > Hi,
> > > >
> > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
> > > original
> > > > valve cover was made of plastic but the one I have is made of
> aluminium
> > > (did
> > > > I spell that right).
> > > >
> > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> work
> > > with
> > > > this valve cover or do I need to find a gasket made for this
> particular
> > > > valve cover?
> > > >
> > > > Thanks,
> > > > Nelson
> > > > '89 YJ
> > > >
> > > >
#46
Guest
Posts: n/a
Re: 258 Valve cover gasket question
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40946C70.EEF31C83@sympatico.ca...
> Only in the dictionary...
>
> We still spell Brit up here on most things...
See, if you'd had the good sense to get into a proper scrape with the Limeys
like we did you could have spelled "colour" or "programme" without the extra
letters, or said "counter-clock wise rather than "anti clockwise". (I've
never been quite sure what the Brits had against clockwise, but apparently
they're very much against it.)
I'm fairly sure you're not forced to use European paper, you know, the stuff
that's longer than our legal size and won't fit in any copier, printer, etc.
That would be worse than taxation without representation. Perhaps you could
all dress up like Indians and throw the stuff into Hudsons Bay or the St
Lawrence in protest!
>
> My spell checker is always pissing me off when I know I have the right
> spelling...
>
> Mike
>
> Steve G wrote:
> >
> > Since when is Brit synonymous with Canadian? (Bet you can't pronounce
that
> > one either).
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40939C33.B3709C24@sympatico.ca...
> > > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Steve G wrote:
> > > >
> > > > No, you did not spell that right, it's aluminum, not aluminium.
> > > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > > Hi,
> > > > >
> > > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this,
the
> > > > original
> > > > > valve cover was made of plastic but the one I have is made of
> > aluminium
> > > > (did
> > > > > I spell that right).
> > > > >
> > > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> > work
> > > > with
> > > > > this valve cover or do I need to find a gasket made for this
> > particular
> > > > > valve cover?
> > > > >
> > > > > Thanks,
> > > > > Nelson
> > > > > '89 YJ
> > > > >
> > > > >
#47
Guest
Posts: n/a
Re: 258 Valve cover gasket question
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40946C70.EEF31C83@sympatico.ca...
> Only in the dictionary...
>
> We still spell Brit up here on most things...
See, if you'd had the good sense to get into a proper scrape with the Limeys
like we did you could have spelled "colour" or "programme" without the extra
letters, or said "counter-clock wise rather than "anti clockwise". (I've
never been quite sure what the Brits had against clockwise, but apparently
they're very much against it.)
I'm fairly sure you're not forced to use European paper, you know, the stuff
that's longer than our legal size and won't fit in any copier, printer, etc.
That would be worse than taxation without representation. Perhaps you could
all dress up like Indians and throw the stuff into Hudsons Bay or the St
Lawrence in protest!
>
> My spell checker is always pissing me off when I know I have the right
> spelling...
>
> Mike
>
> Steve G wrote:
> >
> > Since when is Brit synonymous with Canadian? (Bet you can't pronounce
that
> > one either).
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40939C33.B3709C24@sympatico.ca...
> > > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Steve G wrote:
> > > >
> > > > No, you did not spell that right, it's aluminum, not aluminium.
> > > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > > Hi,
> > > > >
> > > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this,
the
> > > > original
> > > > > valve cover was made of plastic but the one I have is made of
> > aluminium
> > > > (did
> > > > > I spell that right).
> > > > >
> > > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> > work
> > > > with
> > > > > this valve cover or do I need to find a gasket made for this
> > particular
> > > > > valve cover?
> > > > >
> > > > > Thanks,
> > > > > Nelson
> > > > > '89 YJ
> > > > >
> > > > >
#48
Guest
Posts: n/a
Re: 258 Valve cover gasket question
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40946C70.EEF31C83@sympatico.ca...
> Only in the dictionary...
>
> We still spell Brit up here on most things...
See, if you'd had the good sense to get into a proper scrape with the Limeys
like we did you could have spelled "colour" or "programme" without the extra
letters, or said "counter-clock wise rather than "anti clockwise". (I've
never been quite sure what the Brits had against clockwise, but apparently
they're very much against it.)
I'm fairly sure you're not forced to use European paper, you know, the stuff
that's longer than our legal size and won't fit in any copier, printer, etc.
That would be worse than taxation without representation. Perhaps you could
all dress up like Indians and throw the stuff into Hudsons Bay or the St
Lawrence in protest!
>
> My spell checker is always pissing me off when I know I have the right
> spelling...
>
> Mike
>
> Steve G wrote:
> >
> > Since when is Brit synonymous with Canadian? (Bet you can't pronounce
that
> > one either).
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40939C33.B3709C24@sympatico.ca...
> > > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Steve G wrote:
> > > >
> > > > No, you did not spell that right, it's aluminum, not aluminium.
> > > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > > Hi,
> > > > >
> > > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this,
the
> > > > original
> > > > > valve cover was made of plastic but the one I have is made of
> > aluminium
> > > > (did
> > > > > I spell that right).
> > > > >
> > > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> > work
> > > > with
> > > > > this valve cover or do I need to find a gasket made for this
> > particular
> > > > > valve cover?
> > > > >
> > > > > Thanks,
> > > > > Nelson
> > > > > '89 YJ
> > > > >
> > > > >
#49
Guest
Posts: n/a
Re: 258 Valve cover gasket question
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40946C70.EEF31C83@sympatico.ca...
> Only in the dictionary...
>
> We still spell Brit up here on most things...
See, if you'd had the good sense to get into a proper scrape with the Limeys
like we did you could have spelled "colour" or "programme" without the extra
letters, or said "counter-clock wise rather than "anti clockwise". (I've
never been quite sure what the Brits had against clockwise, but apparently
they're very much against it.)
I'm fairly sure you're not forced to use European paper, you know, the stuff
that's longer than our legal size and won't fit in any copier, printer, etc.
That would be worse than taxation without representation. Perhaps you could
all dress up like Indians and throw the stuff into Hudsons Bay or the St
Lawrence in protest!
>
> My spell checker is always pissing me off when I know I have the right
> spelling...
>
> Mike
>
> Steve G wrote:
> >
> > Since when is Brit synonymous with Canadian? (Bet you can't pronounce
that
> > one either).
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40939C33.B3709C24@sympatico.ca...
> > > Heh, posting from Shaw cable, yet he can't spell in Canadian eh?
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Steve G wrote:
> > > >
> > > > No, you did not spell that right, it's aluminum, not aluminium.
> > > > "Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
> > > > news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> > > > > Hi,
> > > > >
> > > > > I've got a 258 engine on a '89 YJ. Unless I'm wrong about this,
the
> > > > original
> > > > > valve cover was made of plastic but the one I have is made of
> > aluminium
> > > > (did
> > > > > I spell that right).
> > > > >
> > > > > If I'm correct in my assumptions above, will a regular NAPA gasket
> > work
> > > > with
> > > > > this valve cover or do I need to find a gasket made for this
> > particular
> > > > > valve cover?
> > > > >
> > > > > Thanks,
> > > > > Nelson
> > > > > '89 YJ
> > > > >
> > > > >
#50
Guest
Posts: n/a
Re: 258 Valve cover gasket question
On Sat, 1 May 2004 22:25:45 -0600, "Jerry McG"
<gmcgeorge.remove@frontier.net> wrote:
>I'm fairly sure you're not forced to use European paper, you know, the stuff
>that's longer than our legal size and won't fit in any copier, printer, etc.
Does anybody know when or why paper sizes diverged?
<gmcgeorge.remove@frontier.net> wrote:
>I'm fairly sure you're not forced to use European paper, you know, the stuff
>that's longer than our legal size and won't fit in any copier, printer, etc.
Does anybody know when or why paper sizes diverged?