258 Valve cover gasket question
Guest
Posts: n/a
258 Valve cover gasket question
Hi,
I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the original
valve cover was made of plastic but the one I have is made of aluminium (did
I spell that right).
If I'm correct in my assumptions above, will a regular NAPA gasket work with
this valve cover or do I need to find a gasket made for this particular
valve cover?
Thanks,
Nelson
'89 YJ
I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the original
valve cover was made of plastic but the one I have is made of aluminium (did
I spell that right).
If I'm correct in my assumptions above, will a regular NAPA gasket work with
this valve cover or do I need to find a gasket made for this particular
valve cover?
Thanks,
Nelson
'89 YJ
Guest
Posts: n/a
Re: 258 Valve cover gasket question
You can get cork gaskets for either type of cover. They are different.
Some of those aluminium covers don't use any gasket, just RTV silicone.
Having the surfaces perfectly clean is the big trick. I get them super
clean, then I use a skim of RTV on both sides with a cork gasket.
The one I put in in 2000 on mine is still pretty dry and my plastic
cover only has the two bolts up top center.
I also 'think' your 89 came stock with the metal cover.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Nelson wrote:
>
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the original
> valve cover was made of plastic but the one I have is made of aluminium (did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
Some of those aluminium covers don't use any gasket, just RTV silicone.
Having the surfaces perfectly clean is the big trick. I get them super
clean, then I use a skim of RTV on both sides with a cork gasket.
The one I put in in 2000 on mine is still pretty dry and my plastic
cover only has the two bolts up top center.
I also 'think' your 89 came stock with the metal cover.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Nelson wrote:
>
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the original
> valve cover was made of plastic but the one I have is made of aluminium (did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
Guest
Posts: n/a
Re: 258 Valve cover gasket question
You can get cork gaskets for either type of cover. They are different.
Some of those aluminium covers don't use any gasket, just RTV silicone.
Having the surfaces perfectly clean is the big trick. I get them super
clean, then I use a skim of RTV on both sides with a cork gasket.
The one I put in in 2000 on mine is still pretty dry and my plastic
cover only has the two bolts up top center.
I also 'think' your 89 came stock with the metal cover.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Nelson wrote:
>
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the original
> valve cover was made of plastic but the one I have is made of aluminium (did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
Some of those aluminium covers don't use any gasket, just RTV silicone.
Having the surfaces perfectly clean is the big trick. I get them super
clean, then I use a skim of RTV on both sides with a cork gasket.
The one I put in in 2000 on mine is still pretty dry and my plastic
cover only has the two bolts up top center.
I also 'think' your 89 came stock with the metal cover.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Nelson wrote:
>
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the original
> valve cover was made of plastic but the one I have is made of aluminium (did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
Guest
Posts: n/a
Re: 258 Valve cover gasket question
You can get cork gaskets for either type of cover. They are different.
Some of those aluminium covers don't use any gasket, just RTV silicone.
Having the surfaces perfectly clean is the big trick. I get them super
clean, then I use a skim of RTV on both sides with a cork gasket.
The one I put in in 2000 on mine is still pretty dry and my plastic
cover only has the two bolts up top center.
I also 'think' your 89 came stock with the metal cover.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Nelson wrote:
>
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the original
> valve cover was made of plastic but the one I have is made of aluminium (did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
Some of those aluminium covers don't use any gasket, just RTV silicone.
Having the surfaces perfectly clean is the big trick. I get them super
clean, then I use a skim of RTV on both sides with a cork gasket.
The one I put in in 2000 on mine is still pretty dry and my plastic
cover only has the two bolts up top center.
I also 'think' your 89 came stock with the metal cover.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Nelson wrote:
>
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the original
> valve cover was made of plastic but the one I have is made of aluminium (did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
Guest
Posts: n/a
Re: 258 Valve cover gasket question
You can get cork gaskets for either type of cover. They are different.
Some of those aluminium covers don't use any gasket, just RTV silicone.
Having the surfaces perfectly clean is the big trick. I get them super
clean, then I use a skim of RTV on both sides with a cork gasket.
The one I put in in 2000 on mine is still pretty dry and my plastic
cover only has the two bolts up top center.
I also 'think' your 89 came stock with the metal cover.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Nelson wrote:
>
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the original
> valve cover was made of plastic but the one I have is made of aluminium (did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
Some of those aluminium covers don't use any gasket, just RTV silicone.
Having the surfaces perfectly clean is the big trick. I get them super
clean, then I use a skim of RTV on both sides with a cork gasket.
The one I put in in 2000 on mine is still pretty dry and my plastic
cover only has the two bolts up top center.
I also 'think' your 89 came stock with the metal cover.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Nelson wrote:
>
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the original
> valve cover was made of plastic but the one I have is made of aluminium (did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
Guest
Posts: n/a
Re: 258 Valve cover gasket question
my 89 has a metal cover
"Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
original
> valve cover was made of plastic but the one I have is made of aluminium
(did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work
with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
>
>
"Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
original
> valve cover was made of plastic but the one I have is made of aluminium
(did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work
with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
>
>
Guest
Posts: n/a
Re: 258 Valve cover gasket question
my 89 has a metal cover
"Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
original
> valve cover was made of plastic but the one I have is made of aluminium
(did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work
with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
>
>
"Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
original
> valve cover was made of plastic but the one I have is made of aluminium
(did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work
with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
>
>
Guest
Posts: n/a
Re: 258 Valve cover gasket question
my 89 has a metal cover
"Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
original
> valve cover was made of plastic but the one I have is made of aluminium
(did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work
with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
>
>
"Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
original
> valve cover was made of plastic but the one I have is made of aluminium
(did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work
with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
>
>
Guest
Posts: n/a
Re: 258 Valve cover gasket question
my 89 has a metal cover
"Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
original
> valve cover was made of plastic but the one I have is made of aluminium
(did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work
with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
>
>
"Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
original
> valve cover was made of plastic but the one I have is made of aluminium
(did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work
with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
>
>
Guest
Posts: n/a
Re: 258 Valve cover gasket question
No, you did not spell that right, it's aluminum, not aluminium.
"Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
original
> valve cover was made of plastic but the one I have is made of aluminium
(did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work
with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
>
>
"Nelson" <newsgroups@optikadesign.qc.ca> wrote in message
news:vcWdnQGV58TpOg_dRVn-vw@giganews.com...
> Hi,
>
> I've got a 258 engine on a '89 YJ. Unless I'm wrong about this, the
original
> valve cover was made of plastic but the one I have is made of aluminium
(did
> I spell that right).
>
> If I'm correct in my assumptions above, will a regular NAPA gasket work
with
> this valve cover or do I need to find a gasket made for this particular
> valve cover?
>
> Thanks,
> Nelson
> '89 YJ
>
>