Wait, he's going into a `71 CJ-5? I thought that automatics didn't, as
a rule, fit. That was one of the reasons for the CJ-7 design -- enough
space for an auto tailshaft.

Earle Horton wrote:
> The answer depends on which transmission you have in the CJ 5. This page
> says that you need an adapter to bolt a 350 Turbohydramatic to an AMC engine
>
> http://www.advanceadapters.com/catalog/025.html
>
> The following two pages have some information on your year, which I believe
> is 1971
>
> http://www.advanceadapters.com/catalog/020.html
> http://www.advanceadapters.com/catalog/021.html
>
> I don't recommend either for or against buying Advance Adapter parts for
> your project. It is just that they have collected a lot of information in
> their catalog, that you might use to figure out what kind of transmission
> you have. I don't believe that the v6 uses the same bell housing pattern as
> the v8, but I am not 100% sure on that. From memory, it is a Buick engine,
> not a Chevy.
>
> Earle
>
> "marvin martian" <marvin666@webtv.net> wrote in message
> news:5126-439695FC-2500@storefull-3118.bay.webtv.net...
>
>>ok i already have all the parts i need from a cj7 project of my own i'll
>>probably donate to the cause of getting said jeep running and out of my
>>garage. i know the dauntless is a gm motor but from past experience my
>>turbo 350 transmission was bolted to the back of a 258with no adapter,
>>so i guess i was just fishing for why the motor would not work (or so i
>>was told) as a replacement because i wasn't given any particulars just
>>that it wouldn't work
>>
>
>
>

 

Wait, he's going into a `71 CJ-5? I thought that automatics didn't, as
a rule, fit. That was one of the reasons for the CJ-7 design -- enough
space for an auto tailshaft.

Earle Horton wrote:
> The answer depends on which transmission you have in the CJ 5. This page
> says that you need an adapter to bolt a 350 Turbohydramatic to an AMC engine
>
> http://www.advanceadapters.com/catalog/025.html
>
> The following two pages have some information on your year, which I believe
> is 1971
>
> http://www.advanceadapters.com/catalog/020.html
> http://www.advanceadapters.com/catalog/021.html
>
> I don't recommend either for or against buying Advance Adapter parts for
> your project. It is just that they have collected a lot of information in
> their catalog, that you might use to figure out what kind of transmission
> you have. I don't believe that the v6 uses the same bell housing pattern as
> the v8, but I am not 100% sure on that. From memory, it is a Buick engine,
> not a Chevy.
>
> Earle
>
> "marvin martian" <marvin666@webtv.net> wrote in message
> news:5126-439695FC-2500@storefull-3118.bay.webtv.net...
>
>>ok i already have all the parts i need from a cj7 project of my own i'll
>>probably donate to the cause of getting said jeep running and out of my
>>garage. i know the dauntless is a gm motor but from past experience my
>>turbo 350 transmission was bolted to the back of a 258with no adapter,
>>so i guess i was just fishing for why the motor would not work (or so i
>>was told) as a replacement because i wasn't given any particulars just
>>that it wouldn't work
>>
>
>
>

 

Mike Romain wrote:
> Don't a 3.2 or 3.8 bolt up too?
>
My mom gave her old 3800 powered Buick away after a cat died in it. I
hauled it to my niece's boyfriend du jour and he used the 3800 FWD
engine in his YJ. He fabbed his own mounts and modified an aluminum
bellhousing with extensive welding and cutting.

Advance and Novak blow more ---- out their *** before 9 AM than the
average platoon does all day...They said it was flat impossible. Flat
impossible took him about a week. Biggest problem was electronic,
getting the ECM to work in a manual application.

 

Mike Romain wrote:
> Don't a 3.2 or 3.8 bolt up too?
>
My mom gave her old 3800 powered Buick away after a cat died in it. I
hauled it to my niece's boyfriend du jour and he used the 3800 FWD
engine in his YJ. He fabbed his own mounts and modified an aluminum
bellhousing with extensive welding and cutting.

Advance and Novak blow more ---- out their *** before 9 AM than the
average platoon does all day...They said it was flat impossible. Flat
impossible took him about a week. Biggest problem was electronic,
getting the ECM to work in a manual application.

 

Mike Romain wrote:
> Don't a 3.2 or 3.8 bolt up too?
>
My mom gave her old 3800 powered Buick away after a cat died in it. I
hauled it to my niece's boyfriend du jour and he used the 3800 FWD
engine in his YJ. He fabbed his own mounts and modified an aluminum
bellhousing with extensive welding and cutting.

Advance and Novak blow more ---- out their *** before 9 AM than the
average platoon does all day...They said it was flat impossible. Flat
impossible took him about a week. Biggest problem was electronic,
getting the ECM to work in a manual application.