258 direct replacement for the dauntless??????
#11
Guest
Posts: n/a
Re: 258 direct replacement for the dauntless??????
Novack has quite a knoledge base too, you could look on their site, may
tell you what is needed to make it fit.
"marvin martian" <marvin666@webtv.net> wrote in message
news:5126-439695FC-2500@storefull-3118.bay.webtv.net...
> ok i already have all the parts i need from a cj7 project of my own i'll
> probably donate to the cause of getting said jeep running and out of my
> garage. i know the dauntless is a gm motor but from past experience my
> turbo 350 transmission was bolted to the back of a 258with no adapter,
> so i guess i was just fishing for why the motor would not work (or so i
> was told) as a replacement because i wasn't given any particulars just
> that it wouldn't work
>
tell you what is needed to make it fit.
"marvin martian" <marvin666@webtv.net> wrote in message
news:5126-439695FC-2500@storefull-3118.bay.webtv.net...
> ok i already have all the parts i need from a cj7 project of my own i'll
> probably donate to the cause of getting said jeep running and out of my
> garage. i know the dauntless is a gm motor but from past experience my
> turbo 350 transmission was bolted to the back of a 258with no adapter,
> so i guess i was just fishing for why the motor would not work (or so i
> was told) as a replacement because i wasn't given any particulars just
> that it wouldn't work
>
#12
Guest
Posts: n/a
Re: 258 direct replacement for the dauntless??????
Novack has quite a knoledge base too, you could look on their site, may
tell you what is needed to make it fit.
"marvin martian" <marvin666@webtv.net> wrote in message
news:5126-439695FC-2500@storefull-3118.bay.webtv.net...
> ok i already have all the parts i need from a cj7 project of my own i'll
> probably donate to the cause of getting said jeep running and out of my
> garage. i know the dauntless is a gm motor but from past experience my
> turbo 350 transmission was bolted to the back of a 258with no adapter,
> so i guess i was just fishing for why the motor would not work (or so i
> was told) as a replacement because i wasn't given any particulars just
> that it wouldn't work
>
tell you what is needed to make it fit.
"marvin martian" <marvin666@webtv.net> wrote in message
news:5126-439695FC-2500@storefull-3118.bay.webtv.net...
> ok i already have all the parts i need from a cj7 project of my own i'll
> probably donate to the cause of getting said jeep running and out of my
> garage. i know the dauntless is a gm motor but from past experience my
> turbo 350 transmission was bolted to the back of a 258with no adapter,
> so i guess i was just fishing for why the motor would not work (or so i
> was told) as a replacement because i wasn't given any particulars just
> that it wouldn't work
>
#13
Guest
Posts: n/a
Re: 258 direct replacement for the dauntless??????
Novack has quite a knoledge base too, you could look on their site, may
tell you what is needed to make it fit.
"marvin martian" <marvin666@webtv.net> wrote in message
news:5126-439695FC-2500@storefull-3118.bay.webtv.net...
> ok i already have all the parts i need from a cj7 project of my own i'll
> probably donate to the cause of getting said jeep running and out of my
> garage. i know the dauntless is a gm motor but from past experience my
> turbo 350 transmission was bolted to the back of a 258with no adapter,
> so i guess i was just fishing for why the motor would not work (or so i
> was told) as a replacement because i wasn't given any particulars just
> that it wouldn't work
>
tell you what is needed to make it fit.
"marvin martian" <marvin666@webtv.net> wrote in message
news:5126-439695FC-2500@storefull-3118.bay.webtv.net...
> ok i already have all the parts i need from a cj7 project of my own i'll
> probably donate to the cause of getting said jeep running and out of my
> garage. i know the dauntless is a gm motor but from past experience my
> turbo 350 transmission was bolted to the back of a 258with no adapter,
> so i guess i was just fishing for why the motor would not work (or so i
> was told) as a replacement because i wasn't given any particulars just
> that it wouldn't work
>
#14
Guest
Posts: n/a
Re: 258 direct replacement for the dauntless??????
The Buick 235 is a direct swap, and most older Buick-Pontiac-Olds engines
bolt up, but have problems with engine mounts, hoses, etc.
I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
was the easiest part.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
bolt up, but have problems with engine mounts, hoses, etc.
I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
was the easiest part.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#15
Guest
Posts: n/a
Re: 258 direct replacement for the dauntless??????
The Buick 235 is a direct swap, and most older Buick-Pontiac-Olds engines
bolt up, but have problems with engine mounts, hoses, etc.
I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
was the easiest part.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
bolt up, but have problems with engine mounts, hoses, etc.
I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
was the easiest part.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#16
Guest
Posts: n/a
Re: 258 direct replacement for the dauntless??????
The Buick 235 is a direct swap, and most older Buick-Pontiac-Olds engines
bolt up, but have problems with engine mounts, hoses, etc.
I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
was the easiest part.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
bolt up, but have problems with engine mounts, hoses, etc.
I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
was the easiest part.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#17
Guest
Posts: n/a
Re: 258 direct replacement for the dauntless??????
Don't a 3.2 or 3.8 bolt up too?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Stupendous Man wrote:
>
> The Buick 235 is a direct swap, and most older Buick-Pontiac-Olds engines
> bolt up, but have problems with engine mounts, hoses, etc.
> I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
> was the easiest part.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Stupendous Man wrote:
>
> The Buick 235 is a direct swap, and most older Buick-Pontiac-Olds engines
> bolt up, but have problems with engine mounts, hoses, etc.
> I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
> was the easiest part.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
#18
Guest
Posts: n/a
Re: 258 direct replacement for the dauntless??????
Don't a 3.2 or 3.8 bolt up too?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Stupendous Man wrote:
>
> The Buick 235 is a direct swap, and most older Buick-Pontiac-Olds engines
> bolt up, but have problems with engine mounts, hoses, etc.
> I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
> was the easiest part.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Stupendous Man wrote:
>
> The Buick 235 is a direct swap, and most older Buick-Pontiac-Olds engines
> bolt up, but have problems with engine mounts, hoses, etc.
> I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
> was the easiest part.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
#19
Guest
Posts: n/a
Re: 258 direct replacement for the dauntless??????
Don't a 3.2 or 3.8 bolt up too?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Stupendous Man wrote:
>
> The Buick 235 is a direct swap, and most older Buick-Pontiac-Olds engines
> bolt up, but have problems with engine mounts, hoses, etc.
> I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
> was the easiest part.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Stupendous Man wrote:
>
> The Buick 235 is a direct swap, and most older Buick-Pontiac-Olds engines
> bolt up, but have problems with engine mounts, hoses, etc.
> I put a 4.3L GM Astrovan engine in a Jeepster, but the bolting to the trans
> was the easiest part.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
#20
Guest
Posts: n/a
Re: 258 direct replacement for the dauntless??????
Wait, he's going into a `71 CJ-5? I thought that automatics didn't, as
a rule, fit. That was one of the reasons for the CJ-7 design -- enough
space for an auto tailshaft.
Earle Horton wrote:
> The answer depends on which transmission you have in the CJ 5. This page
> says that you need an adapter to bolt a 350 Turbohydramatic to an AMC engine
>
> http://www.advanceadapters.com/catalog/025.html
>
> The following two pages have some information on your year, which I believe
> is 1971
>
> http://www.advanceadapters.com/catalog/020.html
> http://www.advanceadapters.com/catalog/021.html
>
> I don't recommend either for or against buying Advance Adapter parts for
> your project. It is just that they have collected a lot of information in
> their catalog, that you might use to figure out what kind of transmission
> you have. I don't believe that the v6 uses the same bell housing pattern as
> the v8, but I am not 100% sure on that. From memory, it is a Buick engine,
> not a Chevy.
>
> Earle
>
> "marvin martian" <marvin666@webtv.net> wrote in message
> news:5126-439695FC-2500@storefull-3118.bay.webtv.net...
>
>>ok i already have all the parts i need from a cj7 project of my own i'll
>>probably donate to the cause of getting said jeep running and out of my
>>garage. i know the dauntless is a gm motor but from past experience my
>>turbo 350 transmission was bolted to the back of a 258with no adapter,
>>so i guess i was just fishing for why the motor would not work (or so i
>>was told) as a replacement because i wasn't given any particulars just
>>that it wouldn't work
>>
>
>
>
a rule, fit. That was one of the reasons for the CJ-7 design -- enough
space for an auto tailshaft.
Earle Horton wrote:
> The answer depends on which transmission you have in the CJ 5. This page
> says that you need an adapter to bolt a 350 Turbohydramatic to an AMC engine
>
> http://www.advanceadapters.com/catalog/025.html
>
> The following two pages have some information on your year, which I believe
> is 1971
>
> http://www.advanceadapters.com/catalog/020.html
> http://www.advanceadapters.com/catalog/021.html
>
> I don't recommend either for or against buying Advance Adapter parts for
> your project. It is just that they have collected a lot of information in
> their catalog, that you might use to figure out what kind of transmission
> you have. I don't believe that the v6 uses the same bell housing pattern as
> the v8, but I am not 100% sure on that. From memory, it is a Buick engine,
> not a Chevy.
>
> Earle
>
> "marvin martian" <marvin666@webtv.net> wrote in message
> news:5126-439695FC-2500@storefull-3118.bay.webtv.net...
>
>>ok i already have all the parts i need from a cj7 project of my own i'll
>>probably donate to the cause of getting said jeep running and out of my
>>garage. i know the dauntless is a gm motor but from past experience my
>>turbo 350 transmission was bolted to the back of a 258with no adapter,
>>so i guess i was just fishing for why the motor would not work (or so i
>>was told) as a replacement because i wasn't given any particulars just
>>that it wouldn't work
>>
>
>
>