2006 Wrangler Unlimited Hitch Installation
Guest
Posts: n/a
2006 Wrangler Unlimited Hitch Installation
I am going to insall a Class III hitch on my 2006 Unlimited, and I
have several options. I can either install the Mopar hitch, whose
towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
hitch that has 400 lbs tongue and 4000 lbs capacity.
I know the Curt hitch requires no special drilling to install.
However, I don't know if I can install the Mopar hitch by myself.
Anybody know if I can do it myself with the Mopar hitch?
Also, what options for wiring do I have? I have seen differing
opinions about whether I can use the 4-pin Mopar wiring harness on my
Unlimited. Some sites say I can use it, some say I MUST use the more
expensive 7-pin harness. Which is right?
I only need the 4-pin unit, but if I have to use the 7 pin, I will.
Thanks
have several options. I can either install the Mopar hitch, whose
towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
hitch that has 400 lbs tongue and 4000 lbs capacity.
I know the Curt hitch requires no special drilling to install.
However, I don't know if I can install the Mopar hitch by myself.
Anybody know if I can do it myself with the Mopar hitch?
Also, what options for wiring do I have? I have seen differing
opinions about whether I can use the 4-pin Mopar wiring harness on my
Unlimited. Some sites say I can use it, some say I MUST use the more
expensive 7-pin harness. Which is right?
I only need the 4-pin unit, but if I have to use the 7 pin, I will.
Thanks
Guest
Posts: n/a
Re: 2006 Wrangler Unlimited Hitch Installation
first of all .a class 3 hitch is a 10,00 pound cap. hitch with a 500
tongue weight or more
and all you need to get for wiring is a product from walmart that plugs
right into the factory connectors makes it real easy and it's a 4 pin
connector for jet ski trailers and the like
jmcgill wrote:
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
tongue weight or more
and all you need to get for wiring is a product from walmart that plugs
right into the factory connectors makes it real easy and it's a 4 pin
connector for jet ski trailers and the like
jmcgill wrote:
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
Guest
Posts: n/a
Re: 2006 Wrangler Unlimited Hitch Installation
first of all .a class 3 hitch is a 10,00 pound cap. hitch with a 500
tongue weight or more
and all you need to get for wiring is a product from walmart that plugs
right into the factory connectors makes it real easy and it's a 4 pin
connector for jet ski trailers and the like
jmcgill wrote:
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
tongue weight or more
and all you need to get for wiring is a product from walmart that plugs
right into the factory connectors makes it real easy and it's a 4 pin
connector for jet ski trailers and the like
jmcgill wrote:
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
Guest
Posts: n/a
Re: 2006 Wrangler Unlimited Hitch Installation
first of all .a class 3 hitch is a 10,00 pound cap. hitch with a 500
tongue weight or more
and all you need to get for wiring is a product from walmart that plugs
right into the factory connectors makes it real easy and it's a 4 pin
connector for jet ski trailers and the like
jmcgill wrote:
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
tongue weight or more
and all you need to get for wiring is a product from walmart that plugs
right into the factory connectors makes it real easy and it's a 4 pin
connector for jet ski trailers and the like
jmcgill wrote:
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
Guest
Posts: n/a
Re: 2006 Wrangler Unlimited Hitch Installation
The Curt hitch might have a 4,000# capacity but your vehicle's maximum
towing capacity is 3,500#
You would need the 7-pin harness only if you are towing a trailer with
electric brakes. If a trailer has electric brakes it will likely be too big
for the vehicle to tow anyway.
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
>I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
towing capacity is 3,500#
You would need the 7-pin harness only if you are towing a trailer with
electric brakes. If a trailer has electric brakes it will likely be too big
for the vehicle to tow anyway.
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
>I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
Guest
Posts: n/a
Re: 2006 Wrangler Unlimited Hitch Installation
The Curt hitch might have a 4,000# capacity but your vehicle's maximum
towing capacity is 3,500#
You would need the 7-pin harness only if you are towing a trailer with
electric brakes. If a trailer has electric brakes it will likely be too big
for the vehicle to tow anyway.
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
>I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
towing capacity is 3,500#
You would need the 7-pin harness only if you are towing a trailer with
electric brakes. If a trailer has electric brakes it will likely be too big
for the vehicle to tow anyway.
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
>I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
Guest
Posts: n/a
Re: 2006 Wrangler Unlimited Hitch Installation
The Curt hitch might have a 4,000# capacity but your vehicle's maximum
towing capacity is 3,500#
You would need the 7-pin harness only if you are towing a trailer with
electric brakes. If a trailer has electric brakes it will likely be too big
for the vehicle to tow anyway.
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
>I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
towing capacity is 3,500#
You would need the 7-pin harness only if you are towing a trailer with
electric brakes. If a trailer has electric brakes it will likely be too big
for the vehicle to tow anyway.
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
>I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
Guest
Posts: n/a
Re: 2006 Wrangler Unlimited Hitch Installation
Warn will sell you a Bumper with a two inch receiver, of course it's not
a class III, but you could put a class III ball on it and fool a few of the
people that would buy a ricer:
http://www.warn.com/truck/mounting-s...per_jeep.shtml I would
then go to your local parts store and buy the wire adapter that just plugs
into the stock harness, like:
http://www.warn.com/truck/mounting-s...per_jeep.shtml The Mopar
hitch I've seen for your car will the smallest 1 1/4" receiver on it.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
--
Posted via a free Usenet account from http://www.teranews.com
a class III, but you could put a class III ball on it and fool a few of the
people that would buy a ricer:
http://www.warn.com/truck/mounting-s...per_jeep.shtml I would
then go to your local parts store and buy the wire adapter that just plugs
into the stock harness, like:
http://www.warn.com/truck/mounting-s...per_jeep.shtml The Mopar
hitch I've seen for your car will the smallest 1 1/4" receiver on it.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 2006 Wrangler Unlimited Hitch Installation
Warn will sell you a Bumper with a two inch receiver, of course it's not
a class III, but you could put a class III ball on it and fool a few of the
people that would buy a ricer:
http://www.warn.com/truck/mounting-s...per_jeep.shtml I would
then go to your local parts store and buy the wire adapter that just plugs
into the stock harness, like:
http://www.warn.com/truck/mounting-s...per_jeep.shtml The Mopar
hitch I've seen for your car will the smallest 1 1/4" receiver on it.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
--
Posted via a free Usenet account from http://www.teranews.com
a class III, but you could put a class III ball on it and fool a few of the
people that would buy a ricer:
http://www.warn.com/truck/mounting-s...per_jeep.shtml I would
then go to your local parts store and buy the wire adapter that just plugs
into the stock harness, like:
http://www.warn.com/truck/mounting-s...per_jeep.shtml The Mopar
hitch I've seen for your car will the smallest 1 1/4" receiver on it.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 2006 Wrangler Unlimited Hitch Installation
Warn will sell you a Bumper with a two inch receiver, of course it's not
a class III, but you could put a class III ball on it and fool a few of the
people that would buy a ricer:
http://www.warn.com/truck/mounting-s...per_jeep.shtml I would
then go to your local parts store and buy the wire adapter that just plugs
into the stock harness, like:
http://www.warn.com/truck/mounting-s...per_jeep.shtml The Mopar
hitch I've seen for your car will the smallest 1 1/4" receiver on it.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
--
Posted via a free Usenet account from http://www.teranews.com
a class III, but you could put a class III ball on it and fool a few of the
people that would buy a ricer:
http://www.warn.com/truck/mounting-s...per_jeep.shtml I would
then go to your local parts store and buy the wire adapter that just plugs
into the stock harness, like:
http://www.warn.com/truck/mounting-s...per_jeep.shtml The Mopar
hitch I've seen for your car will the smallest 1 1/4" receiver on it.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jmcgill" <jmcgill89@gmail.com> wrote in message
news:1175427555.428989.4210@p77g2000hsh.googlegrou ps.com...
> I am going to insall a Class III hitch on my 2006 Unlimited, and I
> have several options. I can either install the Mopar hitch, whose
> towing capacity is 3,500 lbs with a 350 lb tongue weight, or a Curt
> hitch that has 400 lbs tongue and 4000 lbs capacity.
>
> I know the Curt hitch requires no special drilling to install.
> However, I don't know if I can install the Mopar hitch by myself.
> Anybody know if I can do it myself with the Mopar hitch?
>
> Also, what options for wiring do I have? I have seen differing
> opinions about whether I can use the 4-pin Mopar wiring harness on my
> Unlimited. Some sites say I can use it, some say I MUST use the more
> expensive 7-pin harness. Which is right?
>
> I only need the 4-pin unit, but if I have to use the 7 pin, I will.
>
> Thanks
>
--
Posted via a free Usenet account from http://www.teranews.com
Thread
Thread Starter
Forum
Replies
Last Post
JeepAdventure
Jeep JK Forum
1
Nov 14, 2011 05:46 PM
dooch
Jeep JK Forum
22
Sep 25, 2011 05:08 PM
shotgunmess@hotmail.com
Jeep Mailing List
9
Jan 2, 2006 03:47 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
