Is the 2005 X the same as the TJ?
Guest
Posts: n/a
Re: Is the 2005 X the same as the TJ?
Um, nevermind... I just read the entirety of both posts...
sorry.
n.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
>> The Wrangler X is one of the many models of TJ.
>>
>> All I can think is that after 99, the TJ's frame rails changed, and you
>> need
>> Nerf bars for later than 99. Having said that, I wasn't aware that there
>> was
>> a change.
>>
>>
>>
>>
>>
>> "Tom" <vTwinRider@***.net> wrote in message
>> news:y8gAd.1$EG1.0@lakeread04...
>>> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
>>> but
>>> that was years ago. OK, the reason for my question. I purchased a set of
>>> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
>>> bars
>>> are way too long. The bracket, depending on which way you position the
>> step,
>>> will hang past the body mount bracket on either end.
>>>
>>> Part number of the bars: 564462. I purchased the set from a local dealer
>> in
>>> Virginia Beach. I searched the net and found that the steps are for a
>>> '97
>> to
>>> '99 TJ, which says bolt on. But these are custom drilling required. Is
>>> the
>> X
>>> the same animal as the TJ??
>>>
>>> Thanks,
>>> Tom
>>>
>>>
>>
>>
>
>
sorry.
n.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
>> The Wrangler X is one of the many models of TJ.
>>
>> All I can think is that after 99, the TJ's frame rails changed, and you
>> need
>> Nerf bars for later than 99. Having said that, I wasn't aware that there
>> was
>> a change.
>>
>>
>>
>>
>>
>> "Tom" <vTwinRider@***.net> wrote in message
>> news:y8gAd.1$EG1.0@lakeread04...
>>> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
>>> but
>>> that was years ago. OK, the reason for my question. I purchased a set of
>>> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
>>> bars
>>> are way too long. The bracket, depending on which way you position the
>> step,
>>> will hang past the body mount bracket on either end.
>>>
>>> Part number of the bars: 564462. I purchased the set from a local dealer
>> in
>>> Virginia Beach. I searched the net and found that the steps are for a
>>> '97
>> to
>>> '99 TJ, which says bolt on. But these are custom drilling required. Is
>>> the
>> X
>>> the same animal as the TJ??
>>>
>>> Thanks,
>>> Tom
>>>
>>>
>>
>>
>
>
Guest
Posts: n/a
Re: Is the 2005 X the same as the TJ?
Um, nevermind... I just read the entirety of both posts...
sorry.
n.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
>> The Wrangler X is one of the many models of TJ.
>>
>> All I can think is that after 99, the TJ's frame rails changed, and you
>> need
>> Nerf bars for later than 99. Having said that, I wasn't aware that there
>> was
>> a change.
>>
>>
>>
>>
>>
>> "Tom" <vTwinRider@***.net> wrote in message
>> news:y8gAd.1$EG1.0@lakeread04...
>>> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
>>> but
>>> that was years ago. OK, the reason for my question. I purchased a set of
>>> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
>>> bars
>>> are way too long. The bracket, depending on which way you position the
>> step,
>>> will hang past the body mount bracket on either end.
>>>
>>> Part number of the bars: 564462. I purchased the set from a local dealer
>> in
>>> Virginia Beach. I searched the net and found that the steps are for a
>>> '97
>> to
>>> '99 TJ, which says bolt on. But these are custom drilling required. Is
>>> the
>> X
>>> the same animal as the TJ??
>>>
>>> Thanks,
>>> Tom
>>>
>>>
>>
>>
>
>
sorry.
n.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
>> The Wrangler X is one of the many models of TJ.
>>
>> All I can think is that after 99, the TJ's frame rails changed, and you
>> need
>> Nerf bars for later than 99. Having said that, I wasn't aware that there
>> was
>> a change.
>>
>>
>>
>>
>>
>> "Tom" <vTwinRider@***.net> wrote in message
>> news:y8gAd.1$EG1.0@lakeread04...
>>> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
>>> but
>>> that was years ago. OK, the reason for my question. I purchased a set of
>>> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
>>> bars
>>> are way too long. The bracket, depending on which way you position the
>> step,
>>> will hang past the body mount bracket on either end.
>>>
>>> Part number of the bars: 564462. I purchased the set from a local dealer
>> in
>>> Virginia Beach. I searched the net and found that the steps are for a
>>> '97
>> to
>>> '99 TJ, which says bolt on. But these are custom drilling required. Is
>>> the
>> X
>>> the same animal as the TJ??
>>>
>>> Thanks,
>>> Tom
>>>
>>>
>>
>>
>
>
Guest
Posts: n/a
Re: Is the 2005 X the same as the TJ?
Um, nevermind... I just read the entirety of both posts...
sorry.
n.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
>> The Wrangler X is one of the many models of TJ.
>>
>> All I can think is that after 99, the TJ's frame rails changed, and you
>> need
>> Nerf bars for later than 99. Having said that, I wasn't aware that there
>> was
>> a change.
>>
>>
>>
>>
>>
>> "Tom" <vTwinRider@***.net> wrote in message
>> news:y8gAd.1$EG1.0@lakeread04...
>>> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
>>> but
>>> that was years ago. OK, the reason for my question. I purchased a set of
>>> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
>>> bars
>>> are way too long. The bracket, depending on which way you position the
>> step,
>>> will hang past the body mount bracket on either end.
>>>
>>> Part number of the bars: 564462. I purchased the set from a local dealer
>> in
>>> Virginia Beach. I searched the net and found that the steps are for a
>>> '97
>> to
>>> '99 TJ, which says bolt on. But these are custom drilling required. Is
>>> the
>> X
>>> the same animal as the TJ??
>>>
>>> Thanks,
>>> Tom
>>>
>>>
>>
>>
>
>
sorry.
n.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
>> The Wrangler X is one of the many models of TJ.
>>
>> All I can think is that after 99, the TJ's frame rails changed, and you
>> need
>> Nerf bars for later than 99. Having said that, I wasn't aware that there
>> was
>> a change.
>>
>>
>>
>>
>>
>> "Tom" <vTwinRider@***.net> wrote in message
>> news:y8gAd.1$EG1.0@lakeread04...
>>> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
>>> but
>>> that was years ago. OK, the reason for my question. I purchased a set of
>>> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
>>> bars
>>> are way too long. The bracket, depending on which way you position the
>> step,
>>> will hang past the body mount bracket on either end.
>>>
>>> Part number of the bars: 564462. I purchased the set from a local dealer
>> in
>>> Virginia Beach. I searched the net and found that the steps are for a
>>> '97
>> to
>>> '99 TJ, which says bolt on. But these are custom drilling required. Is
>>> the
>> X
>>> the same animal as the TJ??
>>>
>>> Thanks,
>>> Tom
>>>
>>>
>>
>>
>
>
Guest
Posts: n/a
Re: Is the 2005 X the same as the TJ?
The only necessities that come to mind are hole placement. Well, length is
an issue, but I can't imagine the length having changed, but the location
sof the holes in the frame rail might be a variable.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
> > The Wrangler X is one of the many models of TJ.
> >
> > All I can think is that after 99, the TJ's frame rails changed, and you
> > need
> > Nerf bars for later than 99. Having said that, I wasn't aware that there
> > was
> > a change.
> >
> >
> >
> >
> >
> > "Tom" <vTwinRider@***.net> wrote in message
> > news:y8gAd.1$EG1.0@lakeread04...
> >> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
but
> >> that was years ago. OK, the reason for my question. I purchased a set
of
> >> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
bars
> >> are way too long. The bracket, depending on which way you position the
> > step,
> >> will hang past the body mount bracket on either end.
> >>
> >> Part number of the bars: 564462. I purchased the set from a local
dealer
> > in
> >> Virginia Beach. I searched the net and found that the steps are for a
'97
> > to
> >> '99 TJ, which says bolt on. But these are custom drilling required. Is
> >> the
> > X
> >> the same animal as the TJ??
> >>
> >> Thanks,
> >> Tom
> >>
> >>
> >
> >
>
>
an issue, but I can't imagine the length having changed, but the location
sof the holes in the frame rail might be a variable.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
> > The Wrangler X is one of the many models of TJ.
> >
> > All I can think is that after 99, the TJ's frame rails changed, and you
> > need
> > Nerf bars for later than 99. Having said that, I wasn't aware that there
> > was
> > a change.
> >
> >
> >
> >
> >
> > "Tom" <vTwinRider@***.net> wrote in message
> > news:y8gAd.1$EG1.0@lakeread04...
> >> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
but
> >> that was years ago. OK, the reason for my question. I purchased a set
of
> >> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
bars
> >> are way too long. The bracket, depending on which way you position the
> > step,
> >> will hang past the body mount bracket on either end.
> >>
> >> Part number of the bars: 564462. I purchased the set from a local
dealer
> > in
> >> Virginia Beach. I searched the net and found that the steps are for a
'97
> > to
> >> '99 TJ, which says bolt on. But these are custom drilling required. Is
> >> the
> > X
> >> the same animal as the TJ??
> >>
> >> Thanks,
> >> Tom
> >>
> >>
> >
> >
>
>
Guest
Posts: n/a
Re: Is the 2005 X the same as the TJ?
The only necessities that come to mind are hole placement. Well, length is
an issue, but I can't imagine the length having changed, but the location
sof the holes in the frame rail might be a variable.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
> > The Wrangler X is one of the many models of TJ.
> >
> > All I can think is that after 99, the TJ's frame rails changed, and you
> > need
> > Nerf bars for later than 99. Having said that, I wasn't aware that there
> > was
> > a change.
> >
> >
> >
> >
> >
> > "Tom" <vTwinRider@***.net> wrote in message
> > news:y8gAd.1$EG1.0@lakeread04...
> >> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
but
> >> that was years ago. OK, the reason for my question. I purchased a set
of
> >> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
bars
> >> are way too long. The bracket, depending on which way you position the
> > step,
> >> will hang past the body mount bracket on either end.
> >>
> >> Part number of the bars: 564462. I purchased the set from a local
dealer
> > in
> >> Virginia Beach. I searched the net and found that the steps are for a
'97
> > to
> >> '99 TJ, which says bolt on. But these are custom drilling required. Is
> >> the
> > X
> >> the same animal as the TJ??
> >>
> >> Thanks,
> >> Tom
> >>
> >>
> >
> >
>
>
an issue, but I can't imagine the length having changed, but the location
sof the holes in the frame rail might be a variable.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
> > The Wrangler X is one of the many models of TJ.
> >
> > All I can think is that after 99, the TJ's frame rails changed, and you
> > need
> > Nerf bars for later than 99. Having said that, I wasn't aware that there
> > was
> > a change.
> >
> >
> >
> >
> >
> > "Tom" <vTwinRider@***.net> wrote in message
> > news:y8gAd.1$EG1.0@lakeread04...
> >> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
but
> >> that was years ago. OK, the reason for my question. I purchased a set
of
> >> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
bars
> >> are way too long. The bracket, depending on which way you position the
> > step,
> >> will hang past the body mount bracket on either end.
> >>
> >> Part number of the bars: 564462. I purchased the set from a local
dealer
> > in
> >> Virginia Beach. I searched the net and found that the steps are for a
'97
> > to
> >> '99 TJ, which says bolt on. But these are custom drilling required. Is
> >> the
> > X
> >> the same animal as the TJ??
> >>
> >> Thanks,
> >> Tom
> >>
> >>
> >
> >
>
>
Guest
Posts: n/a
Re: Is the 2005 X the same as the TJ?
The only necessities that come to mind are hole placement. Well, length is
an issue, but I can't imagine the length having changed, but the location
sof the holes in the frame rail might be a variable.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
> > The Wrangler X is one of the many models of TJ.
> >
> > All I can think is that after 99, the TJ's frame rails changed, and you
> > need
> > Nerf bars for later than 99. Having said that, I wasn't aware that there
> > was
> > a change.
> >
> >
> >
> >
> >
> > "Tom" <vTwinRider@***.net> wrote in message
> > news:y8gAd.1$EG1.0@lakeread04...
> >> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
but
> >> that was years ago. OK, the reason for my question. I purchased a set
of
> >> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
bars
> >> are way too long. The bracket, depending on which way you position the
> > step,
> >> will hang past the body mount bracket on either end.
> >>
> >> Part number of the bars: 564462. I purchased the set from a local
dealer
> > in
> >> Virginia Beach. I searched the net and found that the steps are for a
'97
> > to
> >> '99 TJ, which says bolt on. But these are custom drilling required. Is
> >> the
> > X
> >> the same animal as the TJ??
> >>
> >> Thanks,
> >> Tom
> >>
> >>
> >
> >
>
>
an issue, but I can't imagine the length having changed, but the location
sof the holes in the frame rail might be a variable.
"Nathan Otis" <na@smeat.spam.net> wrote in message
news:33ei9lF40iadrU1@individual.net...
> Jeff, 'splain. What necessitates nerf bars?
> n.
>
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:10t390a73j97n10@corp.supernews.com...
> > The Wrangler X is one of the many models of TJ.
> >
> > All I can think is that after 99, the TJ's frame rails changed, and you
> > need
> > Nerf bars for later than 99. Having said that, I wasn't aware that there
> > was
> > a change.
> >
> >
> >
> >
> >
> > "Tom" <vTwinRider@***.net> wrote in message
> > news:y8gAd.1$EG1.0@lakeread04...
> >> OK, before I get bashed, I don't own a Jeep; used to have an '89 CJ7,
but
> >> that was years ago. OK, the reason for my question. I purchased a set
of
> >> aftermarket Nerf side steps for my daughters '04 Wrangler X, but the
bars
> >> are way too long. The bracket, depending on which way you position the
> > step,
> >> will hang past the body mount bracket on either end.
> >>
> >> Part number of the bars: 564462. I purchased the set from a local
dealer
> > in
> >> Virginia Beach. I searched the net and found that the steps are for a
'97
> > to
> >> '99 TJ, which says bolt on. But these are custom drilling required. Is
> >> the
> > X
> >> the same animal as the TJ??
> >>
> >> Thanks,
> >> Tom
> >>
> >>
> >
> >
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Mick Miller
Jeep Mailing List
9
Mar 7, 2004 04:58 PM
News Groups
Jeep Mailing List
0
Jan 31, 2004 08:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)