2002 Jeep Wrangler Foglight Adjustment
06-06-2004, 12:17 AM
#1
Guest
Posts: n/a
2002 Jeep Wrangler Foglight Adjustment
I need to make a verticle adjustment to one foglight on my 2002 Jeep
Wrangler. Is this made solely by turning the spring-loaded screw behind the
light housing itself, by loosening the nut on the support, or a combination
of both? Any help is greatly appreciated!
Wrangler. Is this made solely by turning the spring-loaded screw behind the
light housing itself, by loosening the nut on the support, or a combination
of both? Any help is greatly appreciated!
06-06-2004, 12:39 AM
#2
Guest
Posts: n/a
Re: 2002 Jeep Wrangler Foglight Adjustment
Loosen the mounting bracket and adjust:
http://www.----------.com/TJFog.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
*** News wrote:
>
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind the
> light housing itself, by loosening the nut on the support, or a combination
> of both? Any help is greatly appreciated!
http://www.----------.com/TJFog.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
*** News wrote:
>
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind the
> light housing itself, by loosening the nut on the support, or a combination
> of both? Any help is greatly appreciated!
06-06-2004, 12:39 AM
#3
Guest
Posts: n/a
Re: 2002 Jeep Wrangler Foglight Adjustment
Loosen the mounting bracket and adjust:
http://www.----------.com/TJFog.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
*** News wrote:
>
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind the
> light housing itself, by loosening the nut on the support, or a combination
> of both? Any help is greatly appreciated!
http://www.----------.com/TJFog.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
*** News wrote:
>
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind the
> light housing itself, by loosening the nut on the support, or a combination
> of both? Any help is greatly appreciated!
06-06-2004, 12:39 AM
#4
Guest
Posts: n/a
Re: 2002 Jeep Wrangler Foglight Adjustment
Loosen the mounting bracket and adjust:
http://www.----------.com/TJFog.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
*** News wrote:
>
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind the
> light housing itself, by loosening the nut on the support, or a combination
> of both? Any help is greatly appreciated!
http://www.----------.com/TJFog.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
*** News wrote:
>
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind the
> light housing itself, by loosening the nut on the support, or a combination
> of both? Any help is greatly appreciated!
06-06-2004, 12:39 AM
#5
Guest
Posts: n/a
Re: 2002 Jeep Wrangler Foglight Adjustment
Loosen the mounting bracket and adjust:
http://www.----------.com/TJFog.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
*** News wrote:
>
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind the
> light housing itself, by loosening the nut on the support, or a combination
> of both? Any help is greatly appreciated!
http://www.----------.com/TJFog.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
*** News wrote:
>
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind the
> light housing itself, by loosening the nut on the support, or a combination
> of both? Any help is greatly appreciated!
06-06-2004, 12:34 PM
#6
Guest
Posts: n/a
Re: 2002 Jeep Wrangler Foglight Adjustment
You can probably make the adjustment you need by turning the screw. If that
doesn't do it, then loosen and adjust the mounting bracket.
Tom
"*** News" <lzielasko@***.net> wrote in message
news:iVwwc.49579$Yr.36426@okepread04...
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind
the
> light housing itself, by loosening the nut on the support, or a
combination
> of both? Any help is greatly appreciated!
>
>
doesn't do it, then loosen and adjust the mounting bracket.
Tom
"*** News" <lzielasko@***.net> wrote in message
news:iVwwc.49579$Yr.36426@okepread04...
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind
the
> light housing itself, by loosening the nut on the support, or a
combination
> of both? Any help is greatly appreciated!
>
>
06-06-2004, 12:34 PM
#7
Guest
Posts: n/a
Re: 2002 Jeep Wrangler Foglight Adjustment
You can probably make the adjustment you need by turning the screw. If that
doesn't do it, then loosen and adjust the mounting bracket.
Tom
"*** News" <lzielasko@***.net> wrote in message
news:iVwwc.49579$Yr.36426@okepread04...
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind
the
> light housing itself, by loosening the nut on the support, or a
combination
> of both? Any help is greatly appreciated!
>
>
doesn't do it, then loosen and adjust the mounting bracket.
Tom
"*** News" <lzielasko@***.net> wrote in message
news:iVwwc.49579$Yr.36426@okepread04...
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind
the
> light housing itself, by loosening the nut on the support, or a
combination
> of both? Any help is greatly appreciated!
>
>
06-06-2004, 12:34 PM
#8
Guest
Posts: n/a
Re: 2002 Jeep Wrangler Foglight Adjustment
You can probably make the adjustment you need by turning the screw. If that
doesn't do it, then loosen and adjust the mounting bracket.
Tom
"*** News" <lzielasko@***.net> wrote in message
news:iVwwc.49579$Yr.36426@okepread04...
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind
the
> light housing itself, by loosening the nut on the support, or a
combination
> of both? Any help is greatly appreciated!
>
>
doesn't do it, then loosen and adjust the mounting bracket.
Tom
"*** News" <lzielasko@***.net> wrote in message
news:iVwwc.49579$Yr.36426@okepread04...
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind
the
> light housing itself, by loosening the nut on the support, or a
combination
> of both? Any help is greatly appreciated!
>
>
06-06-2004, 12:34 PM
#9
Guest
Posts: n/a
Re: 2002 Jeep Wrangler Foglight Adjustment
You can probably make the adjustment you need by turning the screw. If that
doesn't do it, then loosen and adjust the mounting bracket.
Tom
"*** News" <lzielasko@***.net> wrote in message
news:iVwwc.49579$Yr.36426@okepread04...
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind
the
> light housing itself, by loosening the nut on the support, or a
combination
> of both? Any help is greatly appreciated!
>
>
doesn't do it, then loosen and adjust the mounting bracket.
Tom
"*** News" <lzielasko@***.net> wrote in message
news:iVwwc.49579$Yr.36426@okepread04...
> I need to make a verticle adjustment to one foglight on my 2002 Jeep
> Wrangler. Is this made solely by turning the spring-loaded screw behind
the
> light housing itself, by loosening the nut on the support, or a
combination
> of both? Any help is greatly appreciated!
>
>
06-06-2004, 01:01 PM
#10
Guest
Posts: n/a
Re: 2002 Jeep Wrangler Foglight Adjustment
So are you guys trying to tell me that the stock 'fog' lights have
spring adjusters????
I have never heard of anything so silly. That would triple the cost of
the things.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
mabar wrote:
>
> You can probably make the adjustment you need by turning the screw. If that
> doesn't do it, then loosen and adjust the mounting bracket.
>
> Tom
>
> "*** News" <lzielasko@***.net> wrote in message
> news:iVwwc.49579$Yr.36426@okepread04...
> > I need to make a verticle adjustment to one foglight on my 2002 Jeep
> > Wrangler. Is this made solely by turning the spring-loaded screw behind
> the
> > light housing itself, by loosening the nut on the support, or a
> combination
> > of both? Any help is greatly appreciated!
> >
> >
spring adjusters????
I have never heard of anything so silly. That would triple the cost of
the things.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
mabar wrote:
>
> You can probably make the adjustment you need by turning the screw. If that
> doesn't do it, then loosen and adjust the mounting bracket.
>
> Tom
>
> "*** News" <lzielasko@***.net> wrote in message
> news:iVwwc.49579$Yr.36426@okepread04...
> > I need to make a verticle adjustment to one foglight on my 2002 Jeep
> > Wrangler. Is this made solely by turning the spring-loaded screw behind
> the
> > light housing itself, by loosening the nut on the support, or a
> combination
> > of both? Any help is greatly appreciated!
> >
> >
