2002 Jeep cherokee rear bumper will a 2000 bumper fit??
01-31-2007, 11:27 AM
#21
Guest
Posts: n/a
Re: 2002 Jeep cherokee rear bumper will a 2000 bumper fit??
"DougW" <post.replies@invalid.address> wrote in message
news:Tcvvh.56781$oA1.50363@newsfe19.lga...
> Harry Palmer wrote:
> > I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
> > 2000 one, will it fit ok?
>
> I don't think so. The 2003-4 cross reference
> but the 2000 crosses for 99-02. The diagram isn't
> good enough to tell if it was just cosmetic or not.
> I think the hitch was different.
>
>
>
> --
> DougW
>
>
What diagram are you looking at please? I still don't have a clue how to
figure out what years fit this thing. Isn't there a part number that crosses
the years?
thanks for all you help so far
Hp
01-31-2007, 06:23 PM
#22
Guest
Posts: n/a
Re: 2002 Jeep cherokee rear bumper will a 2000 bumper fit??
Harry Palmer wrote:
> "DougW" wrote ...
>> Harry Palmer wrote:
>>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
>>> 2000 one, will it fit ok?
>>
>> I don't think so. The 2003-4 cross reference
>> but the 2000 crosses for 99-02. The diagram isn't
>> good enough to tell if it was just cosmetic or not.
>> I think the hitch was different.
>
> What diagram are you looking at please? I still don't have a clue how
> to figure out what years fit this thing. Isn't there a part number
> that crosses the years?
The diagrams I'm lookin gat are on a parts counter only site that
someone gave me access to. :)
The cross-reference I use is off of http://www.chryslerpartsdirect.com/
You just look up your model for (in this case) body parts, then
drill down to the bumper. Sometimes there is a diagram, but not always.
Even when there is, it's just a sketch and not an engineering level.
--
DougW
> "DougW" wrote ...
>> Harry Palmer wrote:
>>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
>>> 2000 one, will it fit ok?
>>
>> I don't think so. The 2003-4 cross reference
>> but the 2000 crosses for 99-02. The diagram isn't
>> good enough to tell if it was just cosmetic or not.
>> I think the hitch was different.
>
> What diagram are you looking at please? I still don't have a clue how
> to figure out what years fit this thing. Isn't there a part number
> that crosses the years?
The diagrams I'm lookin gat are on a parts counter only site that
someone gave me access to. :)
The cross-reference I use is off of http://www.chryslerpartsdirect.com/
You just look up your model for (in this case) body parts, then
drill down to the bumper. Sometimes there is a diagram, but not always.
Even when there is, it's just a sketch and not an engineering level.
--
DougW
01-31-2007, 06:23 PM
#23
Guest
Posts: n/a
Re: 2002 Jeep cherokee rear bumper will a 2000 bumper fit??
Harry Palmer wrote:
> "DougW" wrote ...
>> Harry Palmer wrote:
>>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
>>> 2000 one, will it fit ok?
>>
>> I don't think so. The 2003-4 cross reference
>> but the 2000 crosses for 99-02. The diagram isn't
>> good enough to tell if it was just cosmetic or not.
>> I think the hitch was different.
>
> What diagram are you looking at please? I still don't have a clue how
> to figure out what years fit this thing. Isn't there a part number
> that crosses the years?
The diagrams I'm lookin gat are on a parts counter only site that
someone gave me access to. :)
The cross-reference I use is off of http://www.chryslerpartsdirect.com/
You just look up your model for (in this case) body parts, then
drill down to the bumper. Sometimes there is a diagram, but not always.
Even when there is, it's just a sketch and not an engineering level.
--
DougW
> "DougW" wrote ...
>> Harry Palmer wrote:
>>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
>>> 2000 one, will it fit ok?
>>
>> I don't think so. The 2003-4 cross reference
>> but the 2000 crosses for 99-02. The diagram isn't
>> good enough to tell if it was just cosmetic or not.
>> I think the hitch was different.
>
> What diagram are you looking at please? I still don't have a clue how
> to figure out what years fit this thing. Isn't there a part number
> that crosses the years?
The diagrams I'm lookin gat are on a parts counter only site that
someone gave me access to. :)
The cross-reference I use is off of http://www.chryslerpartsdirect.com/
You just look up your model for (in this case) body parts, then
drill down to the bumper. Sometimes there is a diagram, but not always.
Even when there is, it's just a sketch and not an engineering level.
--
DougW
01-31-2007, 06:23 PM
#24
Guest
Posts: n/a
Re: 2002 Jeep cherokee rear bumper will a 2000 bumper fit??
Harry Palmer wrote:
> "DougW" wrote ...
>> Harry Palmer wrote:
>>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
>>> 2000 one, will it fit ok?
>>
>> I don't think so. The 2003-4 cross reference
>> but the 2000 crosses for 99-02. The diagram isn't
>> good enough to tell if it was just cosmetic or not.
>> I think the hitch was different.
>
> What diagram are you looking at please? I still don't have a clue how
> to figure out what years fit this thing. Isn't there a part number
> that crosses the years?
The diagrams I'm lookin gat are on a parts counter only site that
someone gave me access to. :)
The cross-reference I use is off of http://www.chryslerpartsdirect.com/
You just look up your model for (in this case) body parts, then
drill down to the bumper. Sometimes there is a diagram, but not always.
Even when there is, it's just a sketch and not an engineering level.
--
DougW
> "DougW" wrote ...
>> Harry Palmer wrote:
>>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
>>> 2000 one, will it fit ok?
>>
>> I don't think so. The 2003-4 cross reference
>> but the 2000 crosses for 99-02. The diagram isn't
>> good enough to tell if it was just cosmetic or not.
>> I think the hitch was different.
>
> What diagram are you looking at please? I still don't have a clue how
> to figure out what years fit this thing. Isn't there a part number
> that crosses the years?
The diagrams I'm lookin gat are on a parts counter only site that
someone gave me access to. :)
The cross-reference I use is off of http://www.chryslerpartsdirect.com/
You just look up your model for (in this case) body parts, then
drill down to the bumper. Sometimes there is a diagram, but not always.
Even when there is, it's just a sketch and not an engineering level.
--
DougW
01-31-2007, 06:23 PM
#25
Guest
Posts: n/a
Re: 2002 Jeep cherokee rear bumper will a 2000 bumper fit??
Harry Palmer wrote:
> "DougW" wrote ...
>> Harry Palmer wrote:
>>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
>>> 2000 one, will it fit ok?
>>
>> I don't think so. The 2003-4 cross reference
>> but the 2000 crosses for 99-02. The diagram isn't
>> good enough to tell if it was just cosmetic or not.
>> I think the hitch was different.
>
> What diagram are you looking at please? I still don't have a clue how
> to figure out what years fit this thing. Isn't there a part number
> that crosses the years?
The diagrams I'm lookin gat are on a parts counter only site that
someone gave me access to. :)
The cross-reference I use is off of http://www.chryslerpartsdirect.com/
You just look up your model for (in this case) body parts, then
drill down to the bumper. Sometimes there is a diagram, but not always.
Even when there is, it's just a sketch and not an engineering level.
--
DougW
> "DougW" wrote ...
>> Harry Palmer wrote:
>>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
>>> 2000 one, will it fit ok?
>>
>> I don't think so. The 2003-4 cross reference
>> but the 2000 crosses for 99-02. The diagram isn't
>> good enough to tell if it was just cosmetic or not.
>> I think the hitch was different.
>
> What diagram are you looking at please? I still don't have a clue how
> to figure out what years fit this thing. Isn't there a part number
> that crosses the years?
The diagrams I'm lookin gat are on a parts counter only site that
someone gave me access to. :)
The cross-reference I use is off of http://www.chryslerpartsdirect.com/
You just look up your model for (in this case) body parts, then
drill down to the bumper. Sometimes there is a diagram, but not always.
Even when there is, it's just a sketch and not an engineering level.
--
DougW
01-31-2007, 09:28 PM
#26
Guest
Posts: n/a
Re: 2002 Jeep cherokee rear bumper will a 2000 bumper fit??
"DougW" <post.replies@invalid.address> wrote in message
news:kz9wh.59231$oA1.50505@newsfe19.lga...
> Harry Palmer wrote:
> > "DougW" wrote ...
> >> Harry Palmer wrote:
> >>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
> >>> 2000 one, will it fit ok?
> >>
> >> I don't think so. The 2003-4 cross reference
> >> but the 2000 crosses for 99-02. The diagram isn't
> >> good enough to tell if it was just cosmetic or not.
> >> I think the hitch was different.
>
> >
> > What diagram are you looking at please? I still don't have a clue how
> > to figure out what years fit this thing. Isn't there a part number
> > that crosses the years?
>
> The diagrams I'm lookin gat are on a parts counter only site that
> someone gave me access to. :)
>
> The cross-reference I use is off of http://www.chryslerpartsdirect.com/
> You just look up your model for (in this case) body parts, then
> drill down to the bumper. Sometimes there is a diagram, but not always.
> Even when there is, it's just a sketch and not an engineering level.
>
>
>
> --
> DougW
>
>
First of all, thanks for going to all that trouble to check this out for me.
Secondly, I must be using the site incorrectly because I didn't see any date
information there.
01-31-2007, 09:28 PM
#27
Guest
Posts: n/a
Re: 2002 Jeep cherokee rear bumper will a 2000 bumper fit??
"DougW" <post.replies@invalid.address> wrote in message
news:kz9wh.59231$oA1.50505@newsfe19.lga...
> Harry Palmer wrote:
> > "DougW" wrote ...
> >> Harry Palmer wrote:
> >>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
> >>> 2000 one, will it fit ok?
> >>
> >> I don't think so. The 2003-4 cross reference
> >> but the 2000 crosses for 99-02. The diagram isn't
> >> good enough to tell if it was just cosmetic or not.
> >> I think the hitch was different.
>
> >
> > What diagram are you looking at please? I still don't have a clue how
> > to figure out what years fit this thing. Isn't there a part number
> > that crosses the years?
>
> The diagrams I'm lookin gat are on a parts counter only site that
> someone gave me access to. :)
>
> The cross-reference I use is off of http://www.chryslerpartsdirect.com/
> You just look up your model for (in this case) body parts, then
> drill down to the bumper. Sometimes there is a diagram, but not always.
> Even when there is, it's just a sketch and not an engineering level.
>
>
>
> --
> DougW
>
>
First of all, thanks for going to all that trouble to check this out for me.
Secondly, I must be using the site incorrectly because I didn't see any date
information there.
01-31-2007, 09:28 PM
#28
Guest
Posts: n/a
Re: 2002 Jeep cherokee rear bumper will a 2000 bumper fit??
"DougW" <post.replies@invalid.address> wrote in message
news:kz9wh.59231$oA1.50505@newsfe19.lga...
> Harry Palmer wrote:
> > "DougW" wrote ...
> >> Harry Palmer wrote:
> >>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
> >>> 2000 one, will it fit ok?
> >>
> >> I don't think so. The 2003-4 cross reference
> >> but the 2000 crosses for 99-02. The diagram isn't
> >> good enough to tell if it was just cosmetic or not.
> >> I think the hitch was different.
>
> >
> > What diagram are you looking at please? I still don't have a clue how
> > to figure out what years fit this thing. Isn't there a part number
> > that crosses the years?
>
> The diagrams I'm lookin gat are on a parts counter only site that
> someone gave me access to. :)
>
> The cross-reference I use is off of http://www.chryslerpartsdirect.com/
> You just look up your model for (in this case) body parts, then
> drill down to the bumper. Sometimes there is a diagram, but not always.
> Even when there is, it's just a sketch and not an engineering level.
>
>
>
> --
> DougW
>
>
First of all, thanks for going to all that trouble to check this out for me.
Secondly, I must be using the site incorrectly because I didn't see any date
information there.
01-31-2007, 09:28 PM
#29
Guest
Posts: n/a
Re: 2002 Jeep cherokee rear bumper will a 2000 bumper fit??
"DougW" <post.replies@invalid.address> wrote in message
news:kz9wh.59231$oA1.50505@newsfe19.lga...
> Harry Palmer wrote:
> > "DougW" wrote ...
> >> Harry Palmer wrote:
> >>> I'm replacing my rear bumper on my 2002 grand cherokee and can buy a
> >>> 2000 one, will it fit ok?
> >>
> >> I don't think so. The 2003-4 cross reference
> >> but the 2000 crosses for 99-02. The diagram isn't
> >> good enough to tell if it was just cosmetic or not.
> >> I think the hitch was different.
>
> >
> > What diagram are you looking at please? I still don't have a clue how
> > to figure out what years fit this thing. Isn't there a part number
> > that crosses the years?
>
> The diagrams I'm lookin gat are on a parts counter only site that
> someone gave me access to. :)
>
> The cross-reference I use is off of http://www.chryslerpartsdirect.com/
> You just look up your model for (in this case) body parts, then
> drill down to the bumper. Sometimes there is a diagram, but not always.
> Even when there is, it's just a sketch and not an engineering level.
>
>
>
> --
> DougW
>
>
First of all, thanks for going to all that trouble to check this out for me.
Secondly, I must be using the site incorrectly because I didn't see any date
information there.
01-31-2007, 11:03 PM
#30
Guest
Posts: n/a
Re: 2002 Jeep cherokee rear bumper will a 2000 bumper fit??
Harry Palmer wrote:
>
> First of all, thanks for going to all that trouble to check this out
> for me. Secondly, I must be using the site incorrectly because I
> didn't see any date information there.
no problem.
You see the date info when you drill all the way down to a part.
Then you will see the right frame has a title that goes
Description Year MSRP Price Core Price Your Price
(sometimes with a button for 'view illustration')
The Year is what your looking at. If it says 99-04 then that is the
same part for 1999 to 2004.
--
DougW
>
> First of all, thanks for going to all that trouble to check this out
> for me. Secondly, I must be using the site incorrectly because I
> didn't see any date information there.
no problem.
You see the date info when you drill all the way down to a part.
Then you will see the right frame has a title that goes
Description Year MSRP Price Core Price Your Price
(sometimes with a button for 'view illustration')
The Year is what your looking at. If it says 99-04 then that is the
same part for 1999 to 2004.
--
DougW
