I'm sure there is probably an easy answer to this, but not sure enough
to just yank on the thing. I need to take out the radio from my 2001
Cherokee which is located in a center stack with the vents and heater/
AC controls. The mostly rectangular bezel around the front of the
whole thing is loose enough but has no visible fasteners. Please tell
me I don't have to move the console to get access to any screws.


Does that bezel (about 12-14 inches wide and 18-20 high) just pop out
if pulled in the right place? Where's the right place?

Thanks!

 

I guess your right, bezel just pops off. Remember to disconnect the
battery's ground first keep the radio from, locking up where you need a code
to get to work, and to keep the air bags from exploding:
http://www.----------.com/temp/XJradio.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"kokonutty" <islander2000@msn.com> wrote in message
news:1178847563.533787.175740@e65g2000hsc.googlegr oups.com...
> I'm sure there is probably an easy answer to this, but not sure enough
> to just yank on the thing. I need to take out the radio from my 2001
> Cherokee which is located in a center stack with the vents and heater/
> AC controls. The mostly rectangular bezel around the front of the
> whole thing is loose enough but has no visible fasteners. Please tell
> me I don't have to move the console to get access to any screws.
>
>
> Does that bezel (about 12-14 inches wide and 18-20 high) just pop out
> if pulled in the right place? Where's the right place?
>
> Thanks!
>



--
Posted via a free Usenet account from http://www.teranews.com

 

I guess your right, bezel just pops off. Remember to disconnect the
battery's ground first keep the radio from, locking up where you need a code
to get to work, and to keep the air bags from exploding:
http://www.----------.com/temp/XJradio.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"kokonutty" <islander2000@msn.com> wrote in message
news:1178847563.533787.175740@e65g2000hsc.googlegr oups.com...
> I'm sure there is probably an easy answer to this, but not sure enough
> to just yank on the thing. I need to take out the radio from my 2001
> Cherokee which is located in a center stack with the vents and heater/
> AC controls. The mostly rectangular bezel around the front of the
> whole thing is loose enough but has no visible fasteners. Please tell
> me I don't have to move the console to get access to any screws.
>
>
> Does that bezel (about 12-14 inches wide and 18-20 high) just pop out
> if pulled in the right place? Where's the right place?
>
> Thanks!
>



--
Posted via a free Usenet account from http://www.teranews.com

 

I guess your right, bezel just pops off. Remember to disconnect the
battery's ground first keep the radio from, locking up where you need a code
to get to work, and to keep the air bags from exploding:
http://www.----------.com/temp/XJradio.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"kokonutty" <islander2000@msn.com> wrote in message
news:1178847563.533787.175740@e65g2000hsc.googlegr oups.com...
> I'm sure there is probably an easy answer to this, but not sure enough
> to just yank on the thing. I need to take out the radio from my 2001
> Cherokee which is located in a center stack with the vents and heater/
> AC controls. The mostly rectangular bezel around the front of the
> whole thing is loose enough but has no visible fasteners. Please tell
> me I don't have to move the console to get access to any screws.
>
>
> Does that bezel (about 12-14 inches wide and 18-20 high) just pop out
> if pulled in the right place? Where's the right place?
>
> Thanks!
>



--
Posted via a free Usenet account from http://www.teranews.com

 

I guess your right, bezel just pops off. Remember to disconnect the
battery's ground first keep the radio from, locking up where you need a code
to get to work, and to keep the air bags from exploding:
http://www.----------.com/temp/XJradio.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"kokonutty" <islander2000@msn.com> wrote in message
news:1178847563.533787.175740@e65g2000hsc.googlegr oups.com...
> I'm sure there is probably an easy answer to this, but not sure enough
> to just yank on the thing. I need to take out the radio from my 2001
> Cherokee which is located in a center stack with the vents and heater/
> AC controls. The mostly rectangular bezel around the front of the
> whole thing is loose enough but has no visible fasteners. Please tell
> me I don't have to move the console to get access to any screws.
>
>
> Does that bezel (about 12-14 inches wide and 18-20 high) just pop out
> if pulled in the right place? Where's the right place?
>
> Thanks!
>



--
Posted via a free Usenet account from http://www.teranews.com

 

> Does that bezel (about 12-14 inches wide and 18-20 high) just pop out
> if pulled in the right place? Where's the right place?


If it's like my '99 model, yes - just pull on it and it pops right off.
Then two screws to remove the radio. Much easier than on the pre '97
models.

 

> Does that bezel (about 12-14 inches wide and 18-20 high) just pop out
> if pulled in the right place? Where's the right place?


If it's like my '99 model, yes - just pull on it and it pops right off.
Then two screws to remove the radio. Much easier than on the pre '97
models.

 

> Does that bezel (about 12-14 inches wide and 18-20 high) just pop out
> if pulled in the right place? Where's the right place?


If it's like my '99 model, yes - just pull on it and it pops right off.
Then two screws to remove the radio. Much easier than on the pre '97
models.

 

> Does that bezel (about 12-14 inches wide and 18-20 high) just pop out
> if pulled in the right place? Where's the right place?


If it's like my '99 model, yes - just pull on it and it pops right off.
Then two screws to remove the radio. Much easier than on the pre '97
models.

 

Thanks to you and Clap. Four spring clips near top, just outboard of
radio corners, came right off.

Now a radio question: Unit is an AM/FM/CD/Cassette; on the back there
are four connectors - antenna, ground, input and output (gray and
black). Next to the gray and black connectors is a white plug socket
about 3/4" x 1/4" that has two prongs in it. Is this an aux in or aux
out connector? Thanks...