2001 TJ Air Cleaner
06-02-2004, 10:56 PM
#11
Guest
Posts: n/a
Re: 2001 TJ Air Cleaner
I've never tried, but I don't think the lid will fit if it's in wrong. Just in
case it does, screen up is the proper way.
In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>Thanks very much for the info. One final question. The way the stock
>filter is mounted in the box is foam pad on the bottom and the filter on top
>of it, pleats down, screen/gasket side facing up. I have seen pictures of
>filters mounted both ways...pleats up or down. Which is correct or does it
>matter?
>
>Thanks again,
>
>Campbell Freeman
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
>> They did make a change to the replacement filters. Throw the old one away
>along
>> with the pad, and put the new one in as is. It'll be fine.
>>
>>
>>
>>
>> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman" wrote:
>>
>> >Hello,
>> >
>> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
>> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the Mopar
>> >replacement are both the same size, but it sits in the air cleaner box on
>> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The foam
>pad
>> >is impregnated with oil. The replacement does not come with a new pad.
>I
>> >purchased the new filter at my original dealership (Goodwin/Sumter, SC)
>and
>> >checked at another (Galeana/Columbia, SC), & neither show this foam pad
>in
>> >their system.
>> >
>> >My question is should I re-use this pad and what do I do when it becomes
>> >unusable? Without it, will create a gap in the top of the air cleaner
>box
>> >even though the filter is surrounded by a rubber seal. Or should I just
>> >throw away the foam pad and put in the new filter without it? The Jeep
>is 3
>> >years old and is the first air cleaner replacement.
>> >
>> >Thanks very much,
>> >
>> >Campbell Freeman
>> >Columbia, SC
>> >
>>
>
case it does, screen up is the proper way.
In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>Thanks very much for the info. One final question. The way the stock
>filter is mounted in the box is foam pad on the bottom and the filter on top
>of it, pleats down, screen/gasket side facing up. I have seen pictures of
>filters mounted both ways...pleats up or down. Which is correct or does it
>matter?
>
>Thanks again,
>
>Campbell Freeman
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
>> They did make a change to the replacement filters. Throw the old one away
>along
>> with the pad, and put the new one in as is. It'll be fine.
>>
>>
>>
>>
>> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman" wrote:
>>
>> >Hello,
>> >
>> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
>> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the Mopar
>> >replacement are both the same size, but it sits in the air cleaner box on
>> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The foam
>pad
>> >is impregnated with oil. The replacement does not come with a new pad.
>I
>> >purchased the new filter at my original dealership (Goodwin/Sumter, SC)
>and
>> >checked at another (Galeana/Columbia, SC), & neither show this foam pad
>in
>> >their system.
>> >
>> >My question is should I re-use this pad and what do I do when it becomes
>> >unusable? Without it, will create a gap in the top of the air cleaner
>box
>> >even though the filter is surrounded by a rubber seal. Or should I just
>> >throw away the foam pad and put in the new filter without it? The Jeep
>is 3
>> >years old and is the first air cleaner replacement.
>> >
>> >Thanks very much,
>> >
>> >Campbell Freeman
>> >Columbia, SC
>> >
>>
>
06-02-2004, 10:56 PM
#12
Guest
Posts: n/a
Re: 2001 TJ Air Cleaner
I've never tried, but I don't think the lid will fit if it's in wrong. Just in
case it does, screen up is the proper way.
In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>Thanks very much for the info. One final question. The way the stock
>filter is mounted in the box is foam pad on the bottom and the filter on top
>of it, pleats down, screen/gasket side facing up. I have seen pictures of
>filters mounted both ways...pleats up or down. Which is correct or does it
>matter?
>
>Thanks again,
>
>Campbell Freeman
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
>> They did make a change to the replacement filters. Throw the old one away
>along
>> with the pad, and put the new one in as is. It'll be fine.
>>
>>
>>
>>
>> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman" wrote:
>>
>> >Hello,
>> >
>> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
>> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the Mopar
>> >replacement are both the same size, but it sits in the air cleaner box on
>> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The foam
>pad
>> >is impregnated with oil. The replacement does not come with a new pad.
>I
>> >purchased the new filter at my original dealership (Goodwin/Sumter, SC)
>and
>> >checked at another (Galeana/Columbia, SC), & neither show this foam pad
>in
>> >their system.
>> >
>> >My question is should I re-use this pad and what do I do when it becomes
>> >unusable? Without it, will create a gap in the top of the air cleaner
>box
>> >even though the filter is surrounded by a rubber seal. Or should I just
>> >throw away the foam pad and put in the new filter without it? The Jeep
>is 3
>> >years old and is the first air cleaner replacement.
>> >
>> >Thanks very much,
>> >
>> >Campbell Freeman
>> >Columbia, SC
>> >
>>
>
case it does, screen up is the proper way.
In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>Thanks very much for the info. One final question. The way the stock
>filter is mounted in the box is foam pad on the bottom and the filter on top
>of it, pleats down, screen/gasket side facing up. I have seen pictures of
>filters mounted both ways...pleats up or down. Which is correct or does it
>matter?
>
>Thanks again,
>
>Campbell Freeman
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
>> They did make a change to the replacement filters. Throw the old one away
>along
>> with the pad, and put the new one in as is. It'll be fine.
>>
>>
>>
>>
>> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman" wrote:
>>
>> >Hello,
>> >
>> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
>> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the Mopar
>> >replacement are both the same size, but it sits in the air cleaner box on
>> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The foam
>pad
>> >is impregnated with oil. The replacement does not come with a new pad.
>I
>> >purchased the new filter at my original dealership (Goodwin/Sumter, SC)
>and
>> >checked at another (Galeana/Columbia, SC), & neither show this foam pad
>in
>> >their system.
>> >
>> >My question is should I re-use this pad and what do I do when it becomes
>> >unusable? Without it, will create a gap in the top of the air cleaner
>box
>> >even though the filter is surrounded by a rubber seal. Or should I just
>> >throw away the foam pad and put in the new filter without it? The Jeep
>is 3
>> >years old and is the first air cleaner replacement.
>> >
>> >Thanks very much,
>> >
>> >Campbell Freeman
>> >Columbia, SC
>> >
>>
>
06-02-2004, 10:56 PM
#13
Guest
Posts: n/a
Re: 2001 TJ Air Cleaner
I've never tried, but I don't think the lid will fit if it's in wrong. Just in
case it does, screen up is the proper way.
In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>Thanks very much for the info. One final question. The way the stock
>filter is mounted in the box is foam pad on the bottom and the filter on top
>of it, pleats down, screen/gasket side facing up. I have seen pictures of
>filters mounted both ways...pleats up or down. Which is correct or does it
>matter?
>
>Thanks again,
>
>Campbell Freeman
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
>> They did make a change to the replacement filters. Throw the old one away
>along
>> with the pad, and put the new one in as is. It'll be fine.
>>
>>
>>
>>
>> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman" wrote:
>>
>> >Hello,
>> >
>> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
>> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the Mopar
>> >replacement are both the same size, but it sits in the air cleaner box on
>> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The foam
>pad
>> >is impregnated with oil. The replacement does not come with a new pad.
>I
>> >purchased the new filter at my original dealership (Goodwin/Sumter, SC)
>and
>> >checked at another (Galeana/Columbia, SC), & neither show this foam pad
>in
>> >their system.
>> >
>> >My question is should I re-use this pad and what do I do when it becomes
>> >unusable? Without it, will create a gap in the top of the air cleaner
>box
>> >even though the filter is surrounded by a rubber seal. Or should I just
>> >throw away the foam pad and put in the new filter without it? The Jeep
>is 3
>> >years old and is the first air cleaner replacement.
>> >
>> >Thanks very much,
>> >
>> >Campbell Freeman
>> >Columbia, SC
>> >
>>
>
case it does, screen up is the proper way.
In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>Thanks very much for the info. One final question. The way the stock
>filter is mounted in the box is foam pad on the bottom and the filter on top
>of it, pleats down, screen/gasket side facing up. I have seen pictures of
>filters mounted both ways...pleats up or down. Which is correct or does it
>matter?
>
>Thanks again,
>
>Campbell Freeman
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
>> They did make a change to the replacement filters. Throw the old one away
>along
>> with the pad, and put the new one in as is. It'll be fine.
>>
>>
>>
>>
>> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman" wrote:
>>
>> >Hello,
>> >
>> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
>> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the Mopar
>> >replacement are both the same size, but it sits in the air cleaner box on
>> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The foam
>pad
>> >is impregnated with oil. The replacement does not come with a new pad.
>I
>> >purchased the new filter at my original dealership (Goodwin/Sumter, SC)
>and
>> >checked at another (Galeana/Columbia, SC), & neither show this foam pad
>in
>> >their system.
>> >
>> >My question is should I re-use this pad and what do I do when it becomes
>> >unusable? Without it, will create a gap in the top of the air cleaner
>box
>> >even though the filter is surrounded by a rubber seal. Or should I just
>> >throw away the foam pad and put in the new filter without it? The Jeep
>is 3
>> >years old and is the first air cleaner replacement.
>> >
>> >Thanks very much,
>> >
>> >Campbell Freeman
>> >Columbia, SC
>> >
>>
>
06-03-2004, 01:13 AM
#14
Guest
Posts: n/a
Re: 2001 TJ Air Cleaner
I just went out and bought a replacement air cleaner from the dealer today
(Mopar part number is 04797777AB) and it has that foam pad at the bottom.
Instructions on the box suggest that it only goes in one way, pad facing
down and screen up.
TW
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
"bllsht" <nospam@invaliddot.net> wrote in message
news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> I've never tried, but I don't think the lid will fit if it's in wrong.
Just in
> case it does, screen up is the proper way.
>
>
> In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>
> >Thanks very much for the info. One final question. The way the stock
> >filter is mounted in the box is foam pad on the bottom and the filter on
top
> >of it, pleats down, screen/gasket side facing up. I have seen pictures
of
> >filters mounted both ways...pleats up or down. Which is correct or does
it
> >matter?
> >
> >Thanks again,
> >
> >Campbell Freeman
> >
> >
> >"bllsht" <nospam@invaliddot.net> wrote in message
> >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> >> They did make a change to the replacement filters. Throw the old one
away
> >along
> >> with the pad, and put the new one in as is. It'll be fine.
> >>
> >>
> >>
> >>
> >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
wrote:
> >>
> >> >Hello,
> >> >
> >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
Mopar
> >> >replacement are both the same size, but it sits in the air cleaner
box on
> >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
foam
> >pad
> >> >is impregnated with oil. The replacement does not come with a new
pad.
> >I
> >> >purchased the new filter at my original dealership (Goodwin/Sumter,
SC)
> >and
> >> >checked at another (Galeana/Columbia, SC), & neither show this foam
pad
> >in
> >> >their system.
> >> >
> >> >My question is should I re-use this pad and what do I do when it
becomes
> >> >unusable? Without it, will create a gap in the top of the air
cleaner
> >box
> >> >even though the filter is surrounded by a rubber seal. Or should I
just
> >> >throw away the foam pad and put in the new filter without it? The
Jeep
> >is 3
> >> >years old and is the first air cleaner replacement.
> >> >
> >> >Thanks very much,
> >> >
> >> >Campbell Freeman
> >> >Columbia, SC
> >> >
> >>
> >
>
(Mopar part number is 04797777AB) and it has that foam pad at the bottom.
Instructions on the box suggest that it only goes in one way, pad facing
down and screen up.
TW
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
"bllsht" <nospam@invaliddot.net> wrote in message
news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> I've never tried, but I don't think the lid will fit if it's in wrong.
Just in
> case it does, screen up is the proper way.
>
>
> In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>
> >Thanks very much for the info. One final question. The way the stock
> >filter is mounted in the box is foam pad on the bottom and the filter on
top
> >of it, pleats down, screen/gasket side facing up. I have seen pictures
of
> >filters mounted both ways...pleats up or down. Which is correct or does
it
> >matter?
> >
> >Thanks again,
> >
> >Campbell Freeman
> >
> >
> >"bllsht" <nospam@invaliddot.net> wrote in message
> >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> >> They did make a change to the replacement filters. Throw the old one
away
> >along
> >> with the pad, and put the new one in as is. It'll be fine.
> >>
> >>
> >>
> >>
> >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
wrote:
> >>
> >> >Hello,
> >> >
> >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
Mopar
> >> >replacement are both the same size, but it sits in the air cleaner
box on
> >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
foam
> >pad
> >> >is impregnated with oil. The replacement does not come with a new
pad.
> >I
> >> >purchased the new filter at my original dealership (Goodwin/Sumter,
SC)
> >and
> >> >checked at another (Galeana/Columbia, SC), & neither show this foam
pad
> >in
> >> >their system.
> >> >
> >> >My question is should I re-use this pad and what do I do when it
becomes
> >> >unusable? Without it, will create a gap in the top of the air
cleaner
> >box
> >> >even though the filter is surrounded by a rubber seal. Or should I
just
> >> >throw away the foam pad and put in the new filter without it? The
Jeep
> >is 3
> >> >years old and is the first air cleaner replacement.
> >> >
> >> >Thanks very much,
> >> >
> >> >Campbell Freeman
> >> >Columbia, SC
> >> >
> >>
> >
>
06-03-2004, 01:13 AM
#15
Guest
Posts: n/a
Re: 2001 TJ Air Cleaner
I just went out and bought a replacement air cleaner from the dealer today
(Mopar part number is 04797777AB) and it has that foam pad at the bottom.
Instructions on the box suggest that it only goes in one way, pad facing
down and screen up.
TW
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
"bllsht" <nospam@invaliddot.net> wrote in message
news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> I've never tried, but I don't think the lid will fit if it's in wrong.
Just in
> case it does, screen up is the proper way.
>
>
> In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>
> >Thanks very much for the info. One final question. The way the stock
> >filter is mounted in the box is foam pad on the bottom and the filter on
top
> >of it, pleats down, screen/gasket side facing up. I have seen pictures
of
> >filters mounted both ways...pleats up or down. Which is correct or does
it
> >matter?
> >
> >Thanks again,
> >
> >Campbell Freeman
> >
> >
> >"bllsht" <nospam@invaliddot.net> wrote in message
> >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> >> They did make a change to the replacement filters. Throw the old one
away
> >along
> >> with the pad, and put the new one in as is. It'll be fine.
> >>
> >>
> >>
> >>
> >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
wrote:
> >>
> >> >Hello,
> >> >
> >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
Mopar
> >> >replacement are both the same size, but it sits in the air cleaner
box on
> >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
foam
> >pad
> >> >is impregnated with oil. The replacement does not come with a new
pad.
> >I
> >> >purchased the new filter at my original dealership (Goodwin/Sumter,
SC)
> >and
> >> >checked at another (Galeana/Columbia, SC), & neither show this foam
pad
> >in
> >> >their system.
> >> >
> >> >My question is should I re-use this pad and what do I do when it
becomes
> >> >unusable? Without it, will create a gap in the top of the air
cleaner
> >box
> >> >even though the filter is surrounded by a rubber seal. Or should I
just
> >> >throw away the foam pad and put in the new filter without it? The
Jeep
> >is 3
> >> >years old and is the first air cleaner replacement.
> >> >
> >> >Thanks very much,
> >> >
> >> >Campbell Freeman
> >> >Columbia, SC
> >> >
> >>
> >
>
(Mopar part number is 04797777AB) and it has that foam pad at the bottom.
Instructions on the box suggest that it only goes in one way, pad facing
down and screen up.
TW
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
"bllsht" <nospam@invaliddot.net> wrote in message
news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> I've never tried, but I don't think the lid will fit if it's in wrong.
Just in
> case it does, screen up is the proper way.
>
>
> In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>
> >Thanks very much for the info. One final question. The way the stock
> >filter is mounted in the box is foam pad on the bottom and the filter on
top
> >of it, pleats down, screen/gasket side facing up. I have seen pictures
of
> >filters mounted both ways...pleats up or down. Which is correct or does
it
> >matter?
> >
> >Thanks again,
> >
> >Campbell Freeman
> >
> >
> >"bllsht" <nospam@invaliddot.net> wrote in message
> >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> >> They did make a change to the replacement filters. Throw the old one
away
> >along
> >> with the pad, and put the new one in as is. It'll be fine.
> >>
> >>
> >>
> >>
> >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
wrote:
> >>
> >> >Hello,
> >> >
> >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
Mopar
> >> >replacement are both the same size, but it sits in the air cleaner
box on
> >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
foam
> >pad
> >> >is impregnated with oil. The replacement does not come with a new
pad.
> >I
> >> >purchased the new filter at my original dealership (Goodwin/Sumter,
SC)
> >and
> >> >checked at another (Galeana/Columbia, SC), & neither show this foam
pad
> >in
> >> >their system.
> >> >
> >> >My question is should I re-use this pad and what do I do when it
becomes
> >> >unusable? Without it, will create a gap in the top of the air
cleaner
> >box
> >> >even though the filter is surrounded by a rubber seal. Or should I
just
> >> >throw away the foam pad and put in the new filter without it? The
Jeep
> >is 3
> >> >years old and is the first air cleaner replacement.
> >> >
> >> >Thanks very much,
> >> >
> >> >Campbell Freeman
> >> >Columbia, SC
> >> >
> >>
> >
>
06-03-2004, 01:13 AM
#16
Guest
Posts: n/a
Re: 2001 TJ Air Cleaner
I just went out and bought a replacement air cleaner from the dealer today
(Mopar part number is 04797777AB) and it has that foam pad at the bottom.
Instructions on the box suggest that it only goes in one way, pad facing
down and screen up.
TW
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
"bllsht" <nospam@invaliddot.net> wrote in message
news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> I've never tried, but I don't think the lid will fit if it's in wrong.
Just in
> case it does, screen up is the proper way.
>
>
> In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>
> >Thanks very much for the info. One final question. The way the stock
> >filter is mounted in the box is foam pad on the bottom and the filter on
top
> >of it, pleats down, screen/gasket side facing up. I have seen pictures
of
> >filters mounted both ways...pleats up or down. Which is correct or does
it
> >matter?
> >
> >Thanks again,
> >
> >Campbell Freeman
> >
> >
> >"bllsht" <nospam@invaliddot.net> wrote in message
> >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> >> They did make a change to the replacement filters. Throw the old one
away
> >along
> >> with the pad, and put the new one in as is. It'll be fine.
> >>
> >>
> >>
> >>
> >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
wrote:
> >>
> >> >Hello,
> >> >
> >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
Mopar
> >> >replacement are both the same size, but it sits in the air cleaner
box on
> >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
foam
> >pad
> >> >is impregnated with oil. The replacement does not come with a new
pad.
> >I
> >> >purchased the new filter at my original dealership (Goodwin/Sumter,
SC)
> >and
> >> >checked at another (Galeana/Columbia, SC), & neither show this foam
pad
> >in
> >> >their system.
> >> >
> >> >My question is should I re-use this pad and what do I do when it
becomes
> >> >unusable? Without it, will create a gap in the top of the air
cleaner
> >box
> >> >even though the filter is surrounded by a rubber seal. Or should I
just
> >> >throw away the foam pad and put in the new filter without it? The
Jeep
> >is 3
> >> >years old and is the first air cleaner replacement.
> >> >
> >> >Thanks very much,
> >> >
> >> >Campbell Freeman
> >> >Columbia, SC
> >> >
> >>
> >
>
(Mopar part number is 04797777AB) and it has that foam pad at the bottom.
Instructions on the box suggest that it only goes in one way, pad facing
down and screen up.
TW
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
"bllsht" <nospam@invaliddot.net> wrote in message
news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> I've never tried, but I don't think the lid will fit if it's in wrong.
Just in
> case it does, screen up is the proper way.
>
>
> In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>
> >Thanks very much for the info. One final question. The way the stock
> >filter is mounted in the box is foam pad on the bottom and the filter on
top
> >of it, pleats down, screen/gasket side facing up. I have seen pictures
of
> >filters mounted both ways...pleats up or down. Which is correct or does
it
> >matter?
> >
> >Thanks again,
> >
> >Campbell Freeman
> >
> >
> >"bllsht" <nospam@invaliddot.net> wrote in message
> >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> >> They did make a change to the replacement filters. Throw the old one
away
> >along
> >> with the pad, and put the new one in as is. It'll be fine.
> >>
> >>
> >>
> >>
> >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
wrote:
> >>
> >> >Hello,
> >> >
> >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
Mopar
> >> >replacement are both the same size, but it sits in the air cleaner
box on
> >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
foam
> >pad
> >> >is impregnated with oil. The replacement does not come with a new
pad.
> >I
> >> >purchased the new filter at my original dealership (Goodwin/Sumter,
SC)
> >and
> >> >checked at another (Galeana/Columbia, SC), & neither show this foam
pad
> >in
> >> >their system.
> >> >
> >> >My question is should I re-use this pad and what do I do when it
becomes
> >> >unusable? Without it, will create a gap in the top of the air
cleaner
> >box
> >> >even though the filter is surrounded by a rubber seal. Or should I
just
> >> >throw away the foam pad and put in the new filter without it? The
Jeep
> >is 3
> >> >years old and is the first air cleaner replacement.
> >> >
> >> >Thanks very much,
> >> >
> >> >Campbell Freeman
> >> >Columbia, SC
> >> >
> >>
> >
>
06-03-2004, 01:13 AM
#17
Guest
Posts: n/a
Re: 2001 TJ Air Cleaner
I just went out and bought a replacement air cleaner from the dealer today
(Mopar part number is 04797777AB) and it has that foam pad at the bottom.
Instructions on the box suggest that it only goes in one way, pad facing
down and screen up.
TW
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
"bllsht" <nospam@invaliddot.net> wrote in message
news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> I've never tried, but I don't think the lid will fit if it's in wrong.
Just in
> case it does, screen up is the proper way.
>
>
> In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>
> >Thanks very much for the info. One final question. The way the stock
> >filter is mounted in the box is foam pad on the bottom and the filter on
top
> >of it, pleats down, screen/gasket side facing up. I have seen pictures
of
> >filters mounted both ways...pleats up or down. Which is correct or does
it
> >matter?
> >
> >Thanks again,
> >
> >Campbell Freeman
> >
> >
> >"bllsht" <nospam@invaliddot.net> wrote in message
> >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> >> They did make a change to the replacement filters. Throw the old one
away
> >along
> >> with the pad, and put the new one in as is. It'll be fine.
> >>
> >>
> >>
> >>
> >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
wrote:
> >>
> >> >Hello,
> >> >
> >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
Mopar
> >> >replacement are both the same size, but it sits in the air cleaner
box on
> >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
foam
> >pad
> >> >is impregnated with oil. The replacement does not come with a new
pad.
> >I
> >> >purchased the new filter at my original dealership (Goodwin/Sumter,
SC)
> >and
> >> >checked at another (Galeana/Columbia, SC), & neither show this foam
pad
> >in
> >> >their system.
> >> >
> >> >My question is should I re-use this pad and what do I do when it
becomes
> >> >unusable? Without it, will create a gap in the top of the air
cleaner
> >box
> >> >even though the filter is surrounded by a rubber seal. Or should I
just
> >> >throw away the foam pad and put in the new filter without it? The
Jeep
> >is 3
> >> >years old and is the first air cleaner replacement.
> >> >
> >> >Thanks very much,
> >> >
> >> >Campbell Freeman
> >> >Columbia, SC
> >> >
> >>
> >
>
(Mopar part number is 04797777AB) and it has that foam pad at the bottom.
Instructions on the box suggest that it only goes in one way, pad facing
down and screen up.
TW
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
"bllsht" <nospam@invaliddot.net> wrote in message
news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> I've never tried, but I don't think the lid will fit if it's in wrong.
Just in
> case it does, screen up is the proper way.
>
>
> In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
>
> >Thanks very much for the info. One final question. The way the stock
> >filter is mounted in the box is foam pad on the bottom and the filter on
top
> >of it, pleats down, screen/gasket side facing up. I have seen pictures
of
> >filters mounted both ways...pleats up or down. Which is correct or does
it
> >matter?
> >
> >Thanks again,
> >
> >Campbell Freeman
> >
> >
> >"bllsht" <nospam@invaliddot.net> wrote in message
> >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> >> They did make a change to the replacement filters. Throw the old one
away
> >along
> >> with the pad, and put the new one in as is. It'll be fine.
> >>
> >>
> >>
> >>
> >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
wrote:
> >>
> >> >Hello,
> >> >
> >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
Mopar
> >> >replacement are both the same size, but it sits in the air cleaner
box on
> >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
foam
> >pad
> >> >is impregnated with oil. The replacement does not come with a new
pad.
> >I
> >> >purchased the new filter at my original dealership (Goodwin/Sumter,
SC)
> >and
> >> >checked at another (Galeana/Columbia, SC), & neither show this foam
pad
> >in
> >> >their system.
> >> >
> >> >My question is should I re-use this pad and what do I do when it
becomes
> >> >unusable? Without it, will create a gap in the top of the air
cleaner
> >box
> >> >even though the filter is surrounded by a rubber seal. Or should I
just
> >> >throw away the foam pad and put in the new filter without it? The
Jeep
> >is 3
> >> >years old and is the first air cleaner replacement.
> >> >
> >> >Thanks very much,
> >> >
> >> >Campbell Freeman
> >> >Columbia, SC
> >> >
> >>
> >
>
06-03-2004, 08:27 AM
#18
Guest
Posts: n/a
Re: 2001 TJ Air Cleaner
Thanks to all.
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c9mdfc$b5b$1@news.wave.co.nz...
> I just went out and bought a replacement air cleaner from the dealer today
> (Mopar part number is 04797777AB) and it has that foam pad at the bottom.
> Instructions on the box suggest that it only goes in one way, pad facing
> down and screen up.
>
> TW
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
>
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> > I've never tried, but I don't think the lid will fit if it's in wrong.
> Just in
> > case it does, screen up is the proper way.
> >
> >
> > In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
> >
> > >Thanks very much for the info. One final question. The way the stock
> > >filter is mounted in the box is foam pad on the bottom and the filter
on
> top
> > >of it, pleats down, screen/gasket side facing up. I have seen pictures
> of
> > >filters mounted both ways...pleats up or down. Which is correct or
does
> it
> > >matter?
> > >
> > >Thanks again,
> > >
> > >Campbell Freeman
> > >
> > >
> > >"bllsht" <nospam@invaliddot.net> wrote in message
> > >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> > >> They did make a change to the replacement filters. Throw the old one
> away
> > >along
> > >> with the pad, and put the new one in as is. It'll be fine.
> > >>
> > >>
> > >>
> > >>
> > >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
> wrote:
> > >>
> > >> >Hello,
> > >> >
> > >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> > >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
> Mopar
> > >> >replacement are both the same size, but it sits in the air cleaner
> box on
> > >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
> foam
> > >pad
> > >> >is impregnated with oil. The replacement does not come with a new
> pad.
> > >I
> > >> >purchased the new filter at my original dealership (Goodwin/Sumter,
> SC)
> > >and
> > >> >checked at another (Galeana/Columbia, SC), & neither show this foam
> pad
> > >in
> > >> >their system.
> > >> >
> > >> >My question is should I re-use this pad and what do I do when it
> becomes
> > >> >unusable? Without it, will create a gap in the top of the air
> cleaner
> > >box
> > >> >even though the filter is surrounded by a rubber seal. Or should I
> just
> > >> >throw away the foam pad and put in the new filter without it? The
> Jeep
> > >is 3
> > >> >years old and is the first air cleaner replacement.
> > >> >
> > >> >Thanks very much,
> > >> >
> > >> >Campbell Freeman
> > >> >Columbia, SC
> > >> >
> > >>
> > >
> >
>
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c9mdfc$b5b$1@news.wave.co.nz...
> I just went out and bought a replacement air cleaner from the dealer today
> (Mopar part number is 04797777AB) and it has that foam pad at the bottom.
> Instructions on the box suggest that it only goes in one way, pad facing
> down and screen up.
>
> TW
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
>
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> > I've never tried, but I don't think the lid will fit if it's in wrong.
> Just in
> > case it does, screen up is the proper way.
> >
> >
> > In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
> >
> > >Thanks very much for the info. One final question. The way the stock
> > >filter is mounted in the box is foam pad on the bottom and the filter
on
> top
> > >of it, pleats down, screen/gasket side facing up. I have seen pictures
> of
> > >filters mounted both ways...pleats up or down. Which is correct or
does
> it
> > >matter?
> > >
> > >Thanks again,
> > >
> > >Campbell Freeman
> > >
> > >
> > >"bllsht" <nospam@invaliddot.net> wrote in message
> > >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> > >> They did make a change to the replacement filters. Throw the old one
> away
> > >along
> > >> with the pad, and put the new one in as is. It'll be fine.
> > >>
> > >>
> > >>
> > >>
> > >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
> wrote:
> > >>
> > >> >Hello,
> > >> >
> > >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> > >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
> Mopar
> > >> >replacement are both the same size, but it sits in the air cleaner
> box on
> > >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
> foam
> > >pad
> > >> >is impregnated with oil. The replacement does not come with a new
> pad.
> > >I
> > >> >purchased the new filter at my original dealership (Goodwin/Sumter,
> SC)
> > >and
> > >> >checked at another (Galeana/Columbia, SC), & neither show this foam
> pad
> > >in
> > >> >their system.
> > >> >
> > >> >My question is should I re-use this pad and what do I do when it
> becomes
> > >> >unusable? Without it, will create a gap in the top of the air
> cleaner
> > >box
> > >> >even though the filter is surrounded by a rubber seal. Or should I
> just
> > >> >throw away the foam pad and put in the new filter without it? The
> Jeep
> > >is 3
> > >> >years old and is the first air cleaner replacement.
> > >> >
> > >> >Thanks very much,
> > >> >
> > >> >Campbell Freeman
> > >> >Columbia, SC
> > >> >
> > >>
> > >
> >
>
06-03-2004, 08:27 AM
#19
Guest
Posts: n/a
Re: 2001 TJ Air Cleaner
Thanks to all.
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c9mdfc$b5b$1@news.wave.co.nz...
> I just went out and bought a replacement air cleaner from the dealer today
> (Mopar part number is 04797777AB) and it has that foam pad at the bottom.
> Instructions on the box suggest that it only goes in one way, pad facing
> down and screen up.
>
> TW
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
>
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> > I've never tried, but I don't think the lid will fit if it's in wrong.
> Just in
> > case it does, screen up is the proper way.
> >
> >
> > In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
> >
> > >Thanks very much for the info. One final question. The way the stock
> > >filter is mounted in the box is foam pad on the bottom and the filter
on
> top
> > >of it, pleats down, screen/gasket side facing up. I have seen pictures
> of
> > >filters mounted both ways...pleats up or down. Which is correct or
does
> it
> > >matter?
> > >
> > >Thanks again,
> > >
> > >Campbell Freeman
> > >
> > >
> > >"bllsht" <nospam@invaliddot.net> wrote in message
> > >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> > >> They did make a change to the replacement filters. Throw the old one
> away
> > >along
> > >> with the pad, and put the new one in as is. It'll be fine.
> > >>
> > >>
> > >>
> > >>
> > >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
> wrote:
> > >>
> > >> >Hello,
> > >> >
> > >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> > >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
> Mopar
> > >> >replacement are both the same size, but it sits in the air cleaner
> box on
> > >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
> foam
> > >pad
> > >> >is impregnated with oil. The replacement does not come with a new
> pad.
> > >I
> > >> >purchased the new filter at my original dealership (Goodwin/Sumter,
> SC)
> > >and
> > >> >checked at another (Galeana/Columbia, SC), & neither show this foam
> pad
> > >in
> > >> >their system.
> > >> >
> > >> >My question is should I re-use this pad and what do I do when it
> becomes
> > >> >unusable? Without it, will create a gap in the top of the air
> cleaner
> > >box
> > >> >even though the filter is surrounded by a rubber seal. Or should I
> just
> > >> >throw away the foam pad and put in the new filter without it? The
> Jeep
> > >is 3
> > >> >years old and is the first air cleaner replacement.
> > >> >
> > >> >Thanks very much,
> > >> >
> > >> >Campbell Freeman
> > >> >Columbia, SC
> > >> >
> > >>
> > >
> >
>
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c9mdfc$b5b$1@news.wave.co.nz...
> I just went out and bought a replacement air cleaner from the dealer today
> (Mopar part number is 04797777AB) and it has that foam pad at the bottom.
> Instructions on the box suggest that it only goes in one way, pad facing
> down and screen up.
>
> TW
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
>
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> > I've never tried, but I don't think the lid will fit if it's in wrong.
> Just in
> > case it does, screen up is the proper way.
> >
> >
> > In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
> >
> > >Thanks very much for the info. One final question. The way the stock
> > >filter is mounted in the box is foam pad on the bottom and the filter
on
> top
> > >of it, pleats down, screen/gasket side facing up. I have seen pictures
> of
> > >filters mounted both ways...pleats up or down. Which is correct or
does
> it
> > >matter?
> > >
> > >Thanks again,
> > >
> > >Campbell Freeman
> > >
> > >
> > >"bllsht" <nospam@invaliddot.net> wrote in message
> > >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> > >> They did make a change to the replacement filters. Throw the old one
> away
> > >along
> > >> with the pad, and put the new one in as is. It'll be fine.
> > >>
> > >>
> > >>
> > >>
> > >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
> wrote:
> > >>
> > >> >Hello,
> > >> >
> > >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> > >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
> Mopar
> > >> >replacement are both the same size, but it sits in the air cleaner
> box on
> > >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
> foam
> > >pad
> > >> >is impregnated with oil. The replacement does not come with a new
> pad.
> > >I
> > >> >purchased the new filter at my original dealership (Goodwin/Sumter,
> SC)
> > >and
> > >> >checked at another (Galeana/Columbia, SC), & neither show this foam
> pad
> > >in
> > >> >their system.
> > >> >
> > >> >My question is should I re-use this pad and what do I do when it
> becomes
> > >> >unusable? Without it, will create a gap in the top of the air
> cleaner
> > >box
> > >> >even though the filter is surrounded by a rubber seal. Or should I
> just
> > >> >throw away the foam pad and put in the new filter without it? The
> Jeep
> > >is 3
> > >> >years old and is the first air cleaner replacement.
> > >> >
> > >> >Thanks very much,
> > >> >
> > >> >Campbell Freeman
> > >> >Columbia, SC
> > >> >
> > >>
> > >
> >
>
06-03-2004, 08:27 AM
#20
Guest
Posts: n/a
Re: 2001 TJ Air Cleaner
Thanks to all.
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c9mdfc$b5b$1@news.wave.co.nz...
> I just went out and bought a replacement air cleaner from the dealer today
> (Mopar part number is 04797777AB) and it has that foam pad at the bottom.
> Instructions on the box suggest that it only goes in one way, pad facing
> down and screen up.
>
> TW
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
>
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> > I've never tried, but I don't think the lid will fit if it's in wrong.
> Just in
> > case it does, screen up is the proper way.
> >
> >
> > In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
> >
> > >Thanks very much for the info. One final question. The way the stock
> > >filter is mounted in the box is foam pad on the bottom and the filter
on
> top
> > >of it, pleats down, screen/gasket side facing up. I have seen pictures
> of
> > >filters mounted both ways...pleats up or down. Which is correct or
does
> it
> > >matter?
> > >
> > >Thanks again,
> > >
> > >Campbell Freeman
> > >
> > >
> > >"bllsht" <nospam@invaliddot.net> wrote in message
> > >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> > >> They did make a change to the replacement filters. Throw the old one
> away
> > >along
> > >> with the pad, and put the new one in as is. It'll be fine.
> > >>
> > >>
> > >>
> > >>
> > >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
> wrote:
> > >>
> > >> >Hello,
> > >> >
> > >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> > >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
> Mopar
> > >> >replacement are both the same size, but it sits in the air cleaner
> box on
> > >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
> foam
> > >pad
> > >> >is impregnated with oil. The replacement does not come with a new
> pad.
> > >I
> > >> >purchased the new filter at my original dealership (Goodwin/Sumter,
> SC)
> > >and
> > >> >checked at another (Galeana/Columbia, SC), & neither show this foam
> pad
> > >in
> > >> >their system.
> > >> >
> > >> >My question is should I re-use this pad and what do I do when it
> becomes
> > >> >unusable? Without it, will create a gap in the top of the air
> cleaner
> > >box
> > >> >even though the filter is surrounded by a rubber seal. Or should I
> just
> > >> >throw away the foam pad and put in the new filter without it? The
> Jeep
> > >is 3
> > >> >years old and is the first air cleaner replacement.
> > >> >
> > >> >Thanks very much,
> > >> >
> > >> >Campbell Freeman
> > >> >Columbia, SC
> > >> >
> > >>
> > >
> >
>
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c9mdfc$b5b$1@news.wave.co.nz...
> I just went out and bought a replacement air cleaner from the dealer today
> (Mopar part number is 04797777AB) and it has that foam pad at the bottom.
> Instructions on the box suggest that it only goes in one way, pad facing
> down and screen up.
>
> TW
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
>
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:op4tb0tfa2ugo3spsgus0kfgqarh0hmf9s@4ax.com...
> > I've never tried, but I don't think the lid will fit if it's in wrong.
> Just in
> > case it does, screen up is the proper way.
> >
> >
> > In message <c9kk89$c22$1@news3.infoave.net>, "Campbell Freeman" wrote:
> >
> > >Thanks very much for the info. One final question. The way the stock
> > >filter is mounted in the box is foam pad on the bottom and the filter
on
> top
> > >of it, pleats down, screen/gasket side facing up. I have seen pictures
> of
> > >filters mounted both ways...pleats up or down. Which is correct or
does
> it
> > >matter?
> > >
> > >Thanks again,
> > >
> > >Campbell Freeman
> > >
> > >
> > >"bllsht" <nospam@invaliddot.net> wrote in message
> > >news:9mgqb09e0uednt66pqjba9tfraak4a89ij@4ax.com.. .
> > >> They did make a change to the replacement filters. Throw the old one
> away
> > >along
> > >> with the pad, and put the new one in as is. It'll be fine.
> > >>
> > >>
> > >>
> > >>
> > >> In message <c9hv9l$f1ud$1@news3.infoave.net>, "Campbell Freeman"
> wrote:
> > >>
> > >> >Hello,
> > >> >
> > >> >I have a 2001 Jeep Wrangler Sport 4.0 L. I purchased a new air
> > >> >cleaner/filter (Mopar part # 04797777AC). The stock filter & the
> Mopar
> > >> >replacement are both the same size, but it sits in the air cleaner
> box on
> > >> >top of a foam pad (same dimensions L x W & is ~ 3/4" thick). The
> foam
> > >pad
> > >> >is impregnated with oil. The replacement does not come with a new
> pad.
> > >I
> > >> >purchased the new filter at my original dealership (Goodwin/Sumter,
> SC)
> > >and
> > >> >checked at another (Galeana/Columbia, SC), & neither show this foam
> pad
> > >in
> > >> >their system.
> > >> >
> > >> >My question is should I re-use this pad and what do I do when it
> becomes
> > >> >unusable? Without it, will create a gap in the top of the air
> cleaner
> > >box
> > >> >even though the filter is surrounded by a rubber seal. Or should I
> just
> > >> >throw away the foam pad and put in the new filter without it? The
> Jeep
> > >is 3
> > >> >years old and is the first air cleaner replacement.
> > >> >
> > >> >Thanks very much,
> > >> >
> > >> >Campbell Freeman
> > >> >Columbia, SC
> > >> >
> > >>
> > >
> >
>
