Erik Arneson

On 05-Mar-2004, "Casey" <casey3477@nc.rr.com> wrote:
> check here,
> http://www.chryslerpartsdirect.com/moparonline.htm
> Part number is 4864 892, for the front, and the rear is 55155 322AC.

Ouch, I just got an email back saying that the part is on national back
order. Any other good websites for ordering that particular part?

Thanks again for your help.

--
;; Erik Arneson <spam@erik.aarg.net> AARG Net <http://www.aarg.net/> ;;
;; GPG Key ID: 2048R/8B4CBC9C <http://erik.arneson.org/> ;;
;; "Civilization is only savagery silver-gilt." - H. Rider Haggard ;;

Erik Arneson

On 05-Mar-2004, "Casey" <casey3477@nc.rr.com> wrote:
> check here,
> http://www.chryslerpartsdirect.com/moparonline.htm
> Part number is 4864 892, for the front, and the rear is 55155 322AC.

Ouch, I just got an email back saying that the part is on national back
order. Any other good websites for ordering that particular part?

Thanks again for your help.

--
;; Erik Arneson <spam@erik.aarg.net> AARG Net <http://www.aarg.net/> ;;
;; GPG Key ID: 2048R/8B4CBC9C <http://erik.arneson.org/> ;;
;; "Civilization is only savagery silver-gilt." - H. Rider Haggard ;;

Erik Arneson

On 05-Mar-2004, "Casey" <casey3477@nc.rr.com> wrote:
> check here,
> http://www.chryslerpartsdirect.com/moparonline.htm
> Part number is 4864 892, for the front, and the rear is 55155 322AC.

Ouch, I just got an email back saying that the part is on national back
order. Any other good websites for ordering that particular part?

Thanks again for your help.

--
;; Erik Arneson <spam@erik.aarg.net> AARG Net <http://www.aarg.net/> ;;
;; GPG Key ID: 2048R/8B4CBC9C <http://erik.arneson.org/> ;;
;; "Civilization is only savagery silver-gilt." - H. Rider Haggard ;;

Casey

http://cgi.ebay.com/ebaymotors/ws/eB...ory=33706&item
=2462886477

"Erik Arneson" <r.a.m.jeep+******@erik.aarg.net> wrote in message
news:there-is-no-eric-conspiracy.lyvfljdnp4.fsf@erik.arneson.org...
> On 05-Mar-2004, "Casey" <casey3477@nc.rr.com> wrote:
> > check here,
> > http://www.chryslerpartsdirect.com/moparonline.htm
> > Part number is 4864 892, for the front, and the rear is 55155 322AC.
>
> Ouch, I just got an email back saying that the part is on national back
> order. Any other good websites for ordering that particular part?
>
> Thanks again for your help.
>
> --
> ;; Erik Arneson <spam@erik.aarg.net> AARG Net <http://www.aarg.net/> ;;
> ;; GPG Key ID: 2048R/8B4CBC9C <http://erik.arneson.org/> ;;
> ;; "Civilization is only savagery silver-gilt." - H. Rider Haggard ;;

Casey

http://cgi.ebay.com/ebaymotors/ws/eB...ory=33706&item
=2462886477

"Erik Arneson" <r.a.m.jeep+******@erik.aarg.net> wrote in message
news:there-is-no-eric-conspiracy.lyvfljdnp4.fsf@erik.arneson.org...
> On 05-Mar-2004, "Casey" <casey3477@nc.rr.com> wrote:
> > check here,
> > http://www.chryslerpartsdirect.com/moparonline.htm
> > Part number is 4864 892, for the front, and the rear is 55155 322AC.
>
> Ouch, I just got an email back saying that the part is on national back
> order. Any other good websites for ordering that particular part?
>
> Thanks again for your help.
>
> --
> ;; Erik Arneson <spam@erik.aarg.net> AARG Net <http://www.aarg.net/> ;;
> ;; GPG Key ID: 2048R/8B4CBC9C <http://erik.arneson.org/> ;;
> ;; "Civilization is only savagery silver-gilt." - H. Rider Haggard ;;

Casey

http://cgi.ebay.com/ebaymotors/ws/eB...ory=33706&item
=2462886477

"Erik Arneson" <r.a.m.jeep+******@erik.aarg.net> wrote in message
news:there-is-no-eric-conspiracy.lyvfljdnp4.fsf@erik.arneson.org...
> On 05-Mar-2004, "Casey" <casey3477@nc.rr.com> wrote:
> > check here,
> > http://www.chryslerpartsdirect.com/moparonline.htm
> > Part number is 4864 892, for the front, and the rear is 55155 322AC.
>
> Ouch, I just got an email back saying that the part is on national back
> order. Any other good websites for ordering that particular part?
>
> Thanks again for your help.
>
> --
> ;; Erik Arneson <spam@erik.aarg.net> AARG Net <http://www.aarg.net/> ;;
> ;; GPG Key ID: 2048R/8B4CBC9C <http://erik.arneson.org/> ;;
> ;; "Civilization is only savagery silver-gilt." - H. Rider Haggard ;;

mabar

I think I could do that replacement in less than an hour and I have never
done it before. You just remove the cowl and the wiper motor is right there
ready to be replaced.

Tom

"Erik Arneson" <r.a.m.jeep+******@erik.aarg.net> wrote in message
news:there-is-no-eric-conspiracy.ly1xo7gnm7.fsf@erik.arneson.org...
> Howdy folks,
>
> My 2000 TJ's wiper motor is going out. I am lucky to get the wipers
> going when I start the jeep, and loathe to turn them off as they require
> getting out and manually giving them a bit of a push.
>
> Anyhow, my wife took the jeep to the dealership while I was out of town,
> and they tried to tell her that the part would cost $600 and the
> replacement would be about four hours of work. She told them some
> impolite things and brought the Jeep home, and looking around on the web
> it seems like I should be able to get a replacement motor for under
> $200, and the actual replacement is supposedly an hour job.
>
> Anybody have any recommendations on good places to look for the part, or
> instructions on how to replace it? Thanks!
>
> --
> ;; Erik Arneson <spam@erik.aarg.net> AARG Net <http://www.aarg.net/> ;;
> ;; GPG Key ID: 2048R/8B4CBC9C <http://erik.arneson.org/> ;;
> ;; "Civilization is only savagery silver-gilt." - H. Rider Haggard ;;

mabar

I think I could do that replacement in less than an hour and I have never
done it before. You just remove the cowl and the wiper motor is right there
ready to be replaced.

Tom

"Erik Arneson" <r.a.m.jeep+******@erik.aarg.net> wrote in message
news:there-is-no-eric-conspiracy.ly1xo7gnm7.fsf@erik.arneson.org...
> Howdy folks,
>
> My 2000 TJ's wiper motor is going out. I am lucky to get the wipers
> going when I start the jeep, and loathe to turn them off as they require
> getting out and manually giving them a bit of a push.
>
> Anyhow, my wife took the jeep to the dealership while I was out of town,
> and they tried to tell her that the part would cost $600 and the
> replacement would be about four hours of work. She told them some
> impolite things and brought the Jeep home, and looking around on the web
> it seems like I should be able to get a replacement motor for under
> $200, and the actual replacement is supposedly an hour job.
>
> Anybody have any recommendations on good places to look for the part, or
> instructions on how to replace it? Thanks!
>
> --
> ;; Erik Arneson <spam@erik.aarg.net> AARG Net <http://www.aarg.net/> ;;
> ;; GPG Key ID: 2048R/8B4CBC9C <http://erik.arneson.org/> ;;
> ;; "Civilization is only savagery silver-gilt." - H. Rider Haggard ;;

mabar

I think I could do that replacement in less than an hour and I have never
done it before. You just remove the cowl and the wiper motor is right there
ready to be replaced.

Tom

"Erik Arneson" <r.a.m.jeep+******@erik.aarg.net> wrote in message
news:there-is-no-eric-conspiracy.ly1xo7gnm7.fsf@erik.arneson.org...
> Howdy folks,
>
> My 2000 TJ's wiper motor is going out. I am lucky to get the wipers
> going when I start the jeep, and loathe to turn them off as they require
> getting out and manually giving them a bit of a push.
>
> Anyhow, my wife took the jeep to the dealership while I was out of town,
> and they tried to tell her that the part would cost $600 and the
> replacement would be about four hours of work. She told them some
> impolite things and brought the Jeep home, and looking around on the web
> it seems like I should be able to get a replacement motor for under
> $200, and the actual replacement is supposedly an hour job.
>
> Anybody have any recommendations on good places to look for the part, or
> instructions on how to replace it? Thanks!
>
> --
> ;; Erik Arneson <spam@erik.aarg.net> AARG Net <http://www.aarg.net/> ;;
> ;; GPG Key ID: 2048R/8B4CBC9C <http://erik.arneson.org/> ;;
> ;; "Civilization is only savagery silver-gilt." - H. Rider Haggard ;;

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

http://www.----------.com/TJwiperLinkage.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

Casey wrote:
>
> Good, I should have that instruction on my website latter this afternoon.
> Having some technical difficulties :)