2000 Jeep Sport transfer case lever broken
#1
Guest
Posts: n/a
2000 Jeep Sport transfer case lever broken
Symptom: When I try to put my jeep into 4 wheel drive the transfer case
lever just moves forward and back as if it was not connected to anything.
What did I (my son) break. My jeep is located at the river (our second home)
and I need to buy parts to fix the problem. What should I buy and how do I
solve the problem. I would buy all parts for lever and return those that I do
not need. Thanks in advance.
lever just moves forward and back as if it was not connected to anything.
What did I (my son) break. My jeep is located at the river (our second home)
and I need to buy parts to fix the problem. What should I buy and how do I
solve the problem. I would buy all parts for lever and return those that I do
not need. Thanks in advance.
#2
Guest
Posts: n/a
Re: 2000 Jeep Sport transfer case lever broken
More than likely it's just a cotter key fell out, but you'll
probably have to support the transmission, and pull the skid plate out
of the way to have room to stick it back together:
http://www.----------.com/TJshiftTransfer.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
"jim s via CarKB.com" wrote:
>
> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
> lever just moves forward and back as if it was not connected to anything.
> What did I (my son) break. My jeep is located at the river (our second home)
> and I need to buy parts to fix the problem. What should I buy and how do I
> solve the problem. I would buy all parts for lever and return those that I do
> not need. Thanks in advance.
probably have to support the transmission, and pull the skid plate out
of the way to have room to stick it back together:
http://www.----------.com/TJshiftTransfer.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
"jim s via CarKB.com" wrote:
>
> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
> lever just moves forward and back as if it was not connected to anything.
> What did I (my son) break. My jeep is located at the river (our second home)
> and I need to buy parts to fix the problem. What should I buy and how do I
> solve the problem. I would buy all parts for lever and return those that I do
> not need. Thanks in advance.
#3
Guest
Posts: n/a
Re: 2000 Jeep Sport transfer case lever broken
More than likely it's just a cotter key fell out, but you'll
probably have to support the transmission, and pull the skid plate out
of the way to have room to stick it back together:
http://www.----------.com/TJshiftTransfer.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
"jim s via CarKB.com" wrote:
>
> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
> lever just moves forward and back as if it was not connected to anything.
> What did I (my son) break. My jeep is located at the river (our second home)
> and I need to buy parts to fix the problem. What should I buy and how do I
> solve the problem. I would buy all parts for lever and return those that I do
> not need. Thanks in advance.
probably have to support the transmission, and pull the skid plate out
of the way to have room to stick it back together:
http://www.----------.com/TJshiftTransfer.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
"jim s via CarKB.com" wrote:
>
> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
> lever just moves forward and back as if it was not connected to anything.
> What did I (my son) break. My jeep is located at the river (our second home)
> and I need to buy parts to fix the problem. What should I buy and how do I
> solve the problem. I would buy all parts for lever and return those that I do
> not need. Thanks in advance.
#4
Guest
Posts: n/a
Re: 2000 Jeep Sport transfer case lever broken
More than likely it's just a cotter key fell out, but you'll
probably have to support the transmission, and pull the skid plate out
of the way to have room to stick it back together:
http://www.----------.com/TJshiftTransfer.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
"jim s via CarKB.com" wrote:
>
> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
> lever just moves forward and back as if it was not connected to anything.
> What did I (my son) break. My jeep is located at the river (our second home)
> and I need to buy parts to fix the problem. What should I buy and how do I
> solve the problem. I would buy all parts for lever and return those that I do
> not need. Thanks in advance.
probably have to support the transmission, and pull the skid plate out
of the way to have room to stick it back together:
http://www.----------.com/TJshiftTransfer.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
"jim s via CarKB.com" wrote:
>
> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
> lever just moves forward and back as if it was not connected to anything.
> What did I (my son) break. My jeep is located at the river (our second home)
> and I need to buy parts to fix the problem. What should I buy and how do I
> solve the problem. I would buy all parts for lever and return those that I do
> not need. Thanks in advance.
#5
Guest
Posts: n/a
Re: 2000 Jeep Sport transfer case lever broken
More than likely it's just a cotter key fell out, but you'll
probably have to support the transmission, and pull the skid plate out
of the way to have room to stick it back together:
http://www.----------.com/TJshiftTransfer.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
"jim s via CarKB.com" wrote:
>
> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
> lever just moves forward and back as if it was not connected to anything.
> What did I (my son) break. My jeep is located at the river (our second home)
> and I need to buy parts to fix the problem. What should I buy and how do I
> solve the problem. I would buy all parts for lever and return those that I do
> not need. Thanks in advance.
probably have to support the transmission, and pull the skid plate out
of the way to have room to stick it back together:
http://www.----------.com/TJshiftTransfer.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
"jim s via CarKB.com" wrote:
>
> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
> lever just moves forward and back as if it was not connected to anything.
> What did I (my son) break. My jeep is located at the river (our second home)
> and I need to buy parts to fix the problem. What should I buy and how do I
> solve the problem. I would buy all parts for lever and return those that I do
> not need. Thanks in advance.
#6
Guest
Posts: n/a
Re: 2000 Jeep Sport transfer case lever broken
The adjustment clamp on the transfer case shift lever might just be loose.
They can loosen up over time. The clamp attaches the shifter to a rod
sticking out of the t-case on the driver's side. Check there first before
you buy any parts. If that is not loose, then check the key.
If you pull too hard on the t-case shifter, you can loosen the clamp. This
can be easy to do when you aren't getting it into 4Lo and keep tugging.
Paul
in article 42BA4583.FCB24AF7@***.net, L.W. ------ III (ßill) at
----------@***.net wrote on 6/23/05 12:15 AM:
> More than likely it's just a cotter key fell out, but you'll
> probably have to support the transmission, and pull the skid plate out
> of the way to have room to stick it back together:
> http://www.----------.com/TJshiftTransfer.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> "jim s via CarKB.com" wrote:
>>
>> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
>> lever just moves forward and back as if it was not connected to anything.
>> What did I (my son) break. My jeep is located at the river (our second home)
>> and I need to buy parts to fix the problem. What should I buy and how do I
>> solve the problem. I would buy all parts for lever and return those that I do
>> not need. Thanks in advance.
They can loosen up over time. The clamp attaches the shifter to a rod
sticking out of the t-case on the driver's side. Check there first before
you buy any parts. If that is not loose, then check the key.
If you pull too hard on the t-case shifter, you can loosen the clamp. This
can be easy to do when you aren't getting it into 4Lo and keep tugging.
Paul
in article 42BA4583.FCB24AF7@***.net, L.W. ------ III (ßill) at
----------@***.net wrote on 6/23/05 12:15 AM:
> More than likely it's just a cotter key fell out, but you'll
> probably have to support the transmission, and pull the skid plate out
> of the way to have room to stick it back together:
> http://www.----------.com/TJshiftTransfer.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> "jim s via CarKB.com" wrote:
>>
>> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
>> lever just moves forward and back as if it was not connected to anything.
>> What did I (my son) break. My jeep is located at the river (our second home)
>> and I need to buy parts to fix the problem. What should I buy and how do I
>> solve the problem. I would buy all parts for lever and return those that I do
>> not need. Thanks in advance.
#7
Guest
Posts: n/a
Re: 2000 Jeep Sport transfer case lever broken
The adjustment clamp on the transfer case shift lever might just be loose.
They can loosen up over time. The clamp attaches the shifter to a rod
sticking out of the t-case on the driver's side. Check there first before
you buy any parts. If that is not loose, then check the key.
If you pull too hard on the t-case shifter, you can loosen the clamp. This
can be easy to do when you aren't getting it into 4Lo and keep tugging.
Paul
in article 42BA4583.FCB24AF7@***.net, L.W. ------ III (ßill) at
----------@***.net wrote on 6/23/05 12:15 AM:
> More than likely it's just a cotter key fell out, but you'll
> probably have to support the transmission, and pull the skid plate out
> of the way to have room to stick it back together:
> http://www.----------.com/TJshiftTransfer.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> "jim s via CarKB.com" wrote:
>>
>> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
>> lever just moves forward and back as if it was not connected to anything.
>> What did I (my son) break. My jeep is located at the river (our second home)
>> and I need to buy parts to fix the problem. What should I buy and how do I
>> solve the problem. I would buy all parts for lever and return those that I do
>> not need. Thanks in advance.
They can loosen up over time. The clamp attaches the shifter to a rod
sticking out of the t-case on the driver's side. Check there first before
you buy any parts. If that is not loose, then check the key.
If you pull too hard on the t-case shifter, you can loosen the clamp. This
can be easy to do when you aren't getting it into 4Lo and keep tugging.
Paul
in article 42BA4583.FCB24AF7@***.net, L.W. ------ III (ßill) at
----------@***.net wrote on 6/23/05 12:15 AM:
> More than likely it's just a cotter key fell out, but you'll
> probably have to support the transmission, and pull the skid plate out
> of the way to have room to stick it back together:
> http://www.----------.com/TJshiftTransfer.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> "jim s via CarKB.com" wrote:
>>
>> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
>> lever just moves forward and back as if it was not connected to anything.
>> What did I (my son) break. My jeep is located at the river (our second home)
>> and I need to buy parts to fix the problem. What should I buy and how do I
>> solve the problem. I would buy all parts for lever and return those that I do
>> not need. Thanks in advance.
#8
Guest
Posts: n/a
Re: 2000 Jeep Sport transfer case lever broken
The adjustment clamp on the transfer case shift lever might just be loose.
They can loosen up over time. The clamp attaches the shifter to a rod
sticking out of the t-case on the driver's side. Check there first before
you buy any parts. If that is not loose, then check the key.
If you pull too hard on the t-case shifter, you can loosen the clamp. This
can be easy to do when you aren't getting it into 4Lo and keep tugging.
Paul
in article 42BA4583.FCB24AF7@***.net, L.W. ------ III (ßill) at
----------@***.net wrote on 6/23/05 12:15 AM:
> More than likely it's just a cotter key fell out, but you'll
> probably have to support the transmission, and pull the skid plate out
> of the way to have room to stick it back together:
> http://www.----------.com/TJshiftTransfer.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> "jim s via CarKB.com" wrote:
>>
>> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
>> lever just moves forward and back as if it was not connected to anything.
>> What did I (my son) break. My jeep is located at the river (our second home)
>> and I need to buy parts to fix the problem. What should I buy and how do I
>> solve the problem. I would buy all parts for lever and return those that I do
>> not need. Thanks in advance.
They can loosen up over time. The clamp attaches the shifter to a rod
sticking out of the t-case on the driver's side. Check there first before
you buy any parts. If that is not loose, then check the key.
If you pull too hard on the t-case shifter, you can loosen the clamp. This
can be easy to do when you aren't getting it into 4Lo and keep tugging.
Paul
in article 42BA4583.FCB24AF7@***.net, L.W. ------ III (ßill) at
----------@***.net wrote on 6/23/05 12:15 AM:
> More than likely it's just a cotter key fell out, but you'll
> probably have to support the transmission, and pull the skid plate out
> of the way to have room to stick it back together:
> http://www.----------.com/TJshiftTransfer.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> "jim s via CarKB.com" wrote:
>>
>> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
>> lever just moves forward and back as if it was not connected to anything.
>> What did I (my son) break. My jeep is located at the river (our second home)
>> and I need to buy parts to fix the problem. What should I buy and how do I
>> solve the problem. I would buy all parts for lever and return those that I do
>> not need. Thanks in advance.
#9
Guest
Posts: n/a
Re: 2000 Jeep Sport transfer case lever broken
The adjustment clamp on the transfer case shift lever might just be loose.
They can loosen up over time. The clamp attaches the shifter to a rod
sticking out of the t-case on the driver's side. Check there first before
you buy any parts. If that is not loose, then check the key.
If you pull too hard on the t-case shifter, you can loosen the clamp. This
can be easy to do when you aren't getting it into 4Lo and keep tugging.
Paul
in article 42BA4583.FCB24AF7@***.net, L.W. ------ III (ßill) at
----------@***.net wrote on 6/23/05 12:15 AM:
> More than likely it's just a cotter key fell out, but you'll
> probably have to support the transmission, and pull the skid plate out
> of the way to have room to stick it back together:
> http://www.----------.com/TJshiftTransfer.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> "jim s via CarKB.com" wrote:
>>
>> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
>> lever just moves forward and back as if it was not connected to anything.
>> What did I (my son) break. My jeep is located at the river (our second home)
>> and I need to buy parts to fix the problem. What should I buy and how do I
>> solve the problem. I would buy all parts for lever and return those that I do
>> not need. Thanks in advance.
They can loosen up over time. The clamp attaches the shifter to a rod
sticking out of the t-case on the driver's side. Check there first before
you buy any parts. If that is not loose, then check the key.
If you pull too hard on the t-case shifter, you can loosen the clamp. This
can be easy to do when you aren't getting it into 4Lo and keep tugging.
Paul
in article 42BA4583.FCB24AF7@***.net, L.W. ------ III (ßill) at
----------@***.net wrote on 6/23/05 12:15 AM:
> More than likely it's just a cotter key fell out, but you'll
> probably have to support the transmission, and pull the skid plate out
> of the way to have room to stick it back together:
> http://www.----------.com/TJshiftTransfer.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> "jim s via CarKB.com" wrote:
>>
>> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
>> lever just moves forward and back as if it was not connected to anything.
>> What did I (my son) break. My jeep is located at the river (our second home)
>> and I need to buy parts to fix the problem. What should I buy and how do I
>> solve the problem. I would buy all parts for lever and return those that I do
>> not need. Thanks in advance.
#10
Guest
Posts: n/a
Re: 2000 Jeep Sport transfer case lever broken
Thanks for your help. I will check it out this weekend and report back.
L.W.(ßill) ------ III wrote:
> More than likely it's just a cotter key fell out, but you'll
>probably have to support the transmission, and pull the skid plate out
>of the way to have room to stick it back together:
>http://www.----------.com/TJshiftTransfer.pdf
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
>> lever just moves forward and back as if it was not connected to anything.
>> What did I (my son) break. My jeep is located at the river (our second home)
>> and I need to buy parts to fix the problem. What should I buy and how do I
>> solve the problem. I would buy all parts for lever and return those that I do
>> not need. Thanks in advance.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1
L.W.(ßill) ------ III wrote:
> More than likely it's just a cotter key fell out, but you'll
>probably have to support the transmission, and pull the skid plate out
>of the way to have room to stick it back together:
>http://www.----------.com/TJshiftTransfer.pdf
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>> Symptom: When I try to put my jeep into 4 wheel drive the transfer case
>> lever just moves forward and back as if it was not connected to anything.
>> What did I (my son) break. My jeep is located at the river (our second home)
>> and I need to buy parts to fix the problem. What should I buy and how do I
>> solve the problem. I would buy all parts for lever and return those that I do
>> not need. Thanks in advance.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1