2000 Jeep Grand Cherokee Limited Edition
10-22-2006, 11:40 AM
#1
Guest
Posts: n/a
2000 Jeep Grand Cherokee Limited Edition
Hi I would like to know how to pull the rear axle from this model of jeep I
do not see the C-lock from the inner axle shaft from in the Haynes manual
that I have is there something that I am missing? tried to push the axle
in after pulling the pinion shaft from the differential but it will not
move any suggestions?
Thanks Dan
do not see the C-lock from the inner axle shaft from in the Haynes manual
that I have is there something that I am missing? tried to push the axle
in after pulling the pinion shaft from the differential but it will not
move any suggestions?
Thanks Dan
10-22-2006, 12:07 PM
#2
Guest
Posts: n/a
Re: 2000 Jeep Grand Cherokee Limited Edition
You may have a "real axle", i.e. a Dana 44. In that case, after removing
the brakes, remove the axle retainer plate nuts by sticking a socket through
the hole in the wheel flange, then pull the axle out. You will need a press
to replace the axle seal and bearing, if that is what you are after. If you
have the 35C, then you may need to remove the brakes. ;^)
Earle
"4-stroke" <dwfvlf@aol.com> wrote in message
news:22cd8b7e4fdcc849be9ebc8f0b9e34ee@localhost.ta lkaboutautos.com...
> Hi I would like to know how to pull the rear axle from this model of jeep
I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
>
--
Posted via a free Usenet account from http://www.teranews.com
the brakes, remove the axle retainer plate nuts by sticking a socket through
the hole in the wheel flange, then pull the axle out. You will need a press
to replace the axle seal and bearing, if that is what you are after. If you
have the 35C, then you may need to remove the brakes. ;^)
Earle
"4-stroke" <dwfvlf@aol.com> wrote in message
news:22cd8b7e4fdcc849be9ebc8f0b9e34ee@localhost.ta lkaboutautos.com...
> Hi I would like to know how to pull the rear axle from this model of jeep
I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
>
--
Posted via a free Usenet account from http://www.teranews.com
10-22-2006, 12:07 PM
#3
Guest
Posts: n/a
Re: 2000 Jeep Grand Cherokee Limited Edition
You may have a "real axle", i.e. a Dana 44. In that case, after removing
the brakes, remove the axle retainer plate nuts by sticking a socket through
the hole in the wheel flange, then pull the axle out. You will need a press
to replace the axle seal and bearing, if that is what you are after. If you
have the 35C, then you may need to remove the brakes. ;^)
Earle
"4-stroke" <dwfvlf@aol.com> wrote in message
news:22cd8b7e4fdcc849be9ebc8f0b9e34ee@localhost.ta lkaboutautos.com...
> Hi I would like to know how to pull the rear axle from this model of jeep
I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
>
--
Posted via a free Usenet account from http://www.teranews.com
the brakes, remove the axle retainer plate nuts by sticking a socket through
the hole in the wheel flange, then pull the axle out. You will need a press
to replace the axle seal and bearing, if that is what you are after. If you
have the 35C, then you may need to remove the brakes. ;^)
Earle
"4-stroke" <dwfvlf@aol.com> wrote in message
news:22cd8b7e4fdcc849be9ebc8f0b9e34ee@localhost.ta lkaboutautos.com...
> Hi I would like to know how to pull the rear axle from this model of jeep
I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
>
--
Posted via a free Usenet account from http://www.teranews.com
10-22-2006, 12:07 PM
#4
Guest
Posts: n/a
Re: 2000 Jeep Grand Cherokee Limited Edition
You may have a "real axle", i.e. a Dana 44. In that case, after removing
the brakes, remove the axle retainer plate nuts by sticking a socket through
the hole in the wheel flange, then pull the axle out. You will need a press
to replace the axle seal and bearing, if that is what you are after. If you
have the 35C, then you may need to remove the brakes. ;^)
Earle
"4-stroke" <dwfvlf@aol.com> wrote in message
news:22cd8b7e4fdcc849be9ebc8f0b9e34ee@localhost.ta lkaboutautos.com...
> Hi I would like to know how to pull the rear axle from this model of jeep
I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
>
--
Posted via a free Usenet account from http://www.teranews.com
the brakes, remove the axle retainer plate nuts by sticking a socket through
the hole in the wheel flange, then pull the axle out. You will need a press
to replace the axle seal and bearing, if that is what you are after. If you
have the 35C, then you may need to remove the brakes. ;^)
Earle
"4-stroke" <dwfvlf@aol.com> wrote in message
news:22cd8b7e4fdcc849be9ebc8f0b9e34ee@localhost.ta lkaboutautos.com...
> Hi I would like to know how to pull the rear axle from this model of jeep
I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
>
--
Posted via a free Usenet account from http://www.teranews.com
10-22-2006, 04:16 PM
#5
Guest
Posts: n/a
Re: 2000 Jeep Grand Cherokee Limited Edition
Have you pulled the brake drum or disk?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
stroke wrote:
>
> Hi I would like to know how to pull the rear axle from this model of jeep I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
stroke wrote:
>
> Hi I would like to know how to pull the rear axle from this model of jeep I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
10-22-2006, 04:16 PM
#6
Guest
Posts: n/a
Re: 2000 Jeep Grand Cherokee Limited Edition
Have you pulled the brake drum or disk?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
stroke wrote:
>
> Hi I would like to know how to pull the rear axle from this model of jeep I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
stroke wrote:
>
> Hi I would like to know how to pull the rear axle from this model of jeep I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
10-22-2006, 04:16 PM
#7
Guest
Posts: n/a
Re: 2000 Jeep Grand Cherokee Limited Edition
Have you pulled the brake drum or disk?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
stroke wrote:
>
> Hi I would like to know how to pull the rear axle from this model of jeep I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
stroke wrote:
>
> Hi I would like to know how to pull the rear axle from this model of jeep I
> do not see the C-lock from the inner axle shaft from in the Haynes manual
> that I have is there something that I am missing? tried to push the axle
> in after pulling the pinion shaft from the differential but it will not
> move any suggestions?
>
> Thanks Dan
Thread
Thread Starter
Forum
Replies
Last Post
Mamas
Jeep Mailing List
8
07-21-2005 04:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
