200 ZJ fuel pressure???
11-23-2003, 10:29 AM
#5
Guest
Posts: n/a
Re: 200 ZJ fuel pressure???
50psi +/-2,3psi should hold 10 psi overnite if not then something is wrong
DougW wrote:
> Markhousen did pass the time by typing:
> > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
>
> 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> can't say for sure.
DougW wrote:
> Markhousen did pass the time by typing:
> > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
>
> 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> can't say for sure.
11-23-2003, 10:29 AM
#6
Guest
Posts: n/a
Re: 200 ZJ fuel pressure???
50psi +/-2,3psi should hold 10 psi overnite if not then something is wrong
DougW wrote:
> Markhousen did pass the time by typing:
> > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
>
> 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> can't say for sure.
DougW wrote:
> Markhousen did pass the time by typing:
> > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
>
> 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> can't say for sure.
11-23-2003, 10:29 AM
#7
Guest
Posts: n/a
Re: 200 ZJ fuel pressure???
50psi +/-2,3psi should hold 10 psi overnite if not then something is wrong
DougW wrote:
> Markhousen did pass the time by typing:
> > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
>
> 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> can't say for sure.
DougW wrote:
> Markhousen did pass the time by typing:
> > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
>
> 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> can't say for sure.
11-23-2003, 06:01 PM
#8
Guest
Posts: n/a
Re: 200 ZJ fuel pressure???
On Sun, 23 Nov 2003 15:29:50 UTC mic canic <dbrider@cac.net> wrote:
> 50psi +/-2,3psi should hold 10 psi overnite if not then something is wrong
>
> DougW wrote:
>
> > Markhousen did pass the time by typing:
> > > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
> >
> > 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> > can't say for sure.
The older 4.0 spec'd 40 PSI w/o engine vacuum, 32 PSI with vacuum but
what ever the number I'd like to know where the 10 PSI overnight leak
down value comes from. I KNOW I've seen it somewhere but the FSM I
have only says no more than a 10 PSI droop sitting off for 10 minutes.
Even with the older unit I have I still have 15 PSI or so after
sitting for a day but I would sure like to find the source if that is
a spec for overnight leakdown.
--
Will Honea <whonea@codenet.net>
> 50psi +/-2,3psi should hold 10 psi overnite if not then something is wrong
>
> DougW wrote:
>
> > Markhousen did pass the time by typing:
> > > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
> >
> > 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> > can't say for sure.
The older 4.0 spec'd 40 PSI w/o engine vacuum, 32 PSI with vacuum but
what ever the number I'd like to know where the 10 PSI overnight leak
down value comes from. I KNOW I've seen it somewhere but the FSM I
have only says no more than a 10 PSI droop sitting off for 10 minutes.
Even with the older unit I have I still have 15 PSI or so after
sitting for a day but I would sure like to find the source if that is
a spec for overnight leakdown.
--
Will Honea <whonea@codenet.net>
11-23-2003, 06:01 PM
#9
Guest
Posts: n/a
Re: 200 ZJ fuel pressure???
On Sun, 23 Nov 2003 15:29:50 UTC mic canic <dbrider@cac.net> wrote:
> 50psi +/-2,3psi should hold 10 psi overnite if not then something is wrong
>
> DougW wrote:
>
> > Markhousen did pass the time by typing:
> > > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
> >
> > 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> > can't say for sure.
The older 4.0 spec'd 40 PSI w/o engine vacuum, 32 PSI with vacuum but
what ever the number I'd like to know where the 10 PSI overnight leak
down value comes from. I KNOW I've seen it somewhere but the FSM I
have only says no more than a 10 PSI droop sitting off for 10 minutes.
Even with the older unit I have I still have 15 PSI or so after
sitting for a day but I would sure like to find the source if that is
a spec for overnight leakdown.
--
Will Honea <whonea@codenet.net>
> 50psi +/-2,3psi should hold 10 psi overnite if not then something is wrong
>
> DougW wrote:
>
> > Markhousen did pass the time by typing:
> > > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
> >
> > 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> > can't say for sure.
The older 4.0 spec'd 40 PSI w/o engine vacuum, 32 PSI with vacuum but
what ever the number I'd like to know where the 10 PSI overnight leak
down value comes from. I KNOW I've seen it somewhere but the FSM I
have only says no more than a 10 PSI droop sitting off for 10 minutes.
Even with the older unit I have I still have 15 PSI or so after
sitting for a day but I would sure like to find the source if that is
a spec for overnight leakdown.
--
Will Honea <whonea@codenet.net>
11-23-2003, 06:01 PM
#10
Guest
Posts: n/a
Re: 200 ZJ fuel pressure???
On Sun, 23 Nov 2003 15:29:50 UTC mic canic <dbrider@cac.net> wrote:
> 50psi +/-2,3psi should hold 10 psi overnite if not then something is wrong
>
> DougW wrote:
>
> > Markhousen did pass the time by typing:
> > > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
> >
> > 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> > can't say for sure.
The older 4.0 spec'd 40 PSI w/o engine vacuum, 32 PSI with vacuum but
what ever the number I'd like to know where the 10 PSI overnight leak
down value comes from. I KNOW I've seen it somewhere but the FSM I
have only says no more than a 10 PSI droop sitting off for 10 minutes.
Even with the older unit I have I still have 15 PSI or so after
sitting for a day but I would sure like to find the source if that is
a spec for overnight leakdown.
--
Will Honea <whonea@codenet.net>
> 50psi +/-2,3psi should hold 10 psi overnite if not then something is wrong
>
> DougW wrote:
>
> > Markhousen did pass the time by typing:
> > > 4.0- 6 cyl,,,,what should the fuel pressure be at the injector manifold?
> >
> > 32psi for the 93ZJ 4.0 Yours should be similar but since they changed in 2000
> > can't say for sure.
The older 4.0 spec'd 40 PSI w/o engine vacuum, 32 PSI with vacuum but
what ever the number I'd like to know where the 10 PSI overnight leak
down value comes from. I KNOW I've seen it somewhere but the FSM I
have only says no more than a 10 PSI droop sitting off for 10 minutes.
Even with the older unit I have I still have 15 PSI or so after
sitting for a day but I would sure like to find the source if that is
a spec for overnight leakdown.
--
Will Honea <whonea@codenet.net>
