#2 Piston Pics - Got it out!!! Need feedback
Guest
Posts: n/a
Re: #2 Piston Pics - Got it out!!! Need feedback
Same suggestion I have suggested, you pull one piston and you ring
and put bearings in them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Oh, I think I get it. The worn area on the loose bearing is copper? I
> didn't pick that up right away.
>
> Now, what if others are "through the copper", what do you suggest?
>
> Thanks,
>
> Bill
and put bearings in them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Oh, I think I get it. The worn area on the loose bearing is copper? I
> didn't pick that up right away.
>
> Now, what if others are "through the copper", what do you suggest?
>
> Thanks,
>
> Bill
Guest
Posts: n/a
Re: #2 Piston Pics - Got it out!!! Need feedback
Same suggestion I have suggested, you pull one piston and you ring
and put bearings in them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Oh, I think I get it. The worn area on the loose bearing is copper? I
> didn't pick that up right away.
>
> Now, what if others are "through the copper", what do you suggest?
>
> Thanks,
>
> Bill
and put bearings in them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Oh, I think I get it. The worn area on the loose bearing is copper? I
> didn't pick that up right away.
>
> Now, what if others are "through the copper", what do you suggest?
>
> Thanks,
>
> Bill
Guest
Posts: n/a
Re: #2 Piston Pics - Got it out!!! Need feedback
Thanks for the help Bill.
Is there an easy way to clean up this piston before I ring it?
Thanks,
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40411CB1.1E311B03@***.net...
> Same suggestion I have suggested, you pull one piston and you ring
> and put bearings in them all.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Oh, I think I get it. The worn area on the loose bearing is copper? I
> > didn't pick that up right away.
> >
> > Now, what if others are "through the copper", what do you suggest?
> >
> > Thanks,
> >
> > Bill
Is there an easy way to clean up this piston before I ring it?
Thanks,
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40411CB1.1E311B03@***.net...
> Same suggestion I have suggested, you pull one piston and you ring
> and put bearings in them all.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Oh, I think I get it. The worn area on the loose bearing is copper? I
> > didn't pick that up right away.
> >
> > Now, what if others are "through the copper", what do you suggest?
> >
> > Thanks,
> >
> > Bill
Guest
Posts: n/a
Re: #2 Piston Pics - Got it out!!! Need feedback
Thanks for the help Bill.
Is there an easy way to clean up this piston before I ring it?
Thanks,
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40411CB1.1E311B03@***.net...
> Same suggestion I have suggested, you pull one piston and you ring
> and put bearings in them all.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Oh, I think I get it. The worn area on the loose bearing is copper? I
> > didn't pick that up right away.
> >
> > Now, what if others are "through the copper", what do you suggest?
> >
> > Thanks,
> >
> > Bill
Is there an easy way to clean up this piston before I ring it?
Thanks,
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40411CB1.1E311B03@***.net...
> Same suggestion I have suggested, you pull one piston and you ring
> and put bearings in them all.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Oh, I think I get it. The worn area on the loose bearing is copper? I
> > didn't pick that up right away.
> >
> > Now, what if others are "through the copper", what do you suggest?
> >
> > Thanks,
> >
> > Bill
Guest
Posts: n/a
Re: #2 Piston Pics - Got it out!!! Need feedback
Thanks for the help Bill.
Is there an easy way to clean up this piston before I ring it?
Thanks,
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40411CB1.1E311B03@***.net...
> Same suggestion I have suggested, you pull one piston and you ring
> and put bearings in them all.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Oh, I think I get it. The worn area on the loose bearing is copper? I
> > didn't pick that up right away.
> >
> > Now, what if others are "through the copper", what do you suggest?
> >
> > Thanks,
> >
> > Bill
Is there an easy way to clean up this piston before I ring it?
Thanks,
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40411CB1.1E311B03@***.net...
> Same suggestion I have suggested, you pull one piston and you ring
> and put bearings in them all.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Oh, I think I get it. The worn area on the loose bearing is copper? I
> > didn't pick that up right away.
> >
> > Now, what if others are "through the copper", what do you suggest?
> >
> > Thanks,
> >
> > Bill
Guest
Posts: n/a
Re: #2 Piston Pics - Got it out!!! Need feedback
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c1qsom$1krk9u$1@ID-193866.news.uni-berlin.de...
>
> Got the piston out. Just tapped on the rod bolt a couple of times and it
> loosened up. Came right out of the cylinder, no ridge, no problem.
>
> Here are the pics. Any feedback on the condition of this piston or what
the
> pic might tell you would be appreciated.
>
> http://members.bigvalley.net/wuji/je.../piston_2a.jpg
> http://members.bigvalley.net/wuji/je.../piston_2b.jpg
> http://members.bigvalley.net/wuji/je...berrings2a.jpg
>
> Thanks,
>
>
> Bill
>
Bill, can you get a picture of the cylinder itself so that we can see the
finish on it?
Chris
Guest
Posts: n/a
Re: #2 Piston Pics - Got it out!!! Need feedback
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c1qsom$1krk9u$1@ID-193866.news.uni-berlin.de...
>
> Got the piston out. Just tapped on the rod bolt a couple of times and it
> loosened up. Came right out of the cylinder, no ridge, no problem.
>
> Here are the pics. Any feedback on the condition of this piston or what
the
> pic might tell you would be appreciated.
>
> http://members.bigvalley.net/wuji/je.../piston_2a.jpg
> http://members.bigvalley.net/wuji/je.../piston_2b.jpg
> http://members.bigvalley.net/wuji/je...berrings2a.jpg
>
> Thanks,
>
>
> Bill
>
Bill, can you get a picture of the cylinder itself so that we can see the
finish on it?
Chris
Guest
Posts: n/a
Re: #2 Piston Pics - Got it out!!! Need feedback
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c1qsom$1krk9u$1@ID-193866.news.uni-berlin.de...
>
> Got the piston out. Just tapped on the rod bolt a couple of times and it
> loosened up. Came right out of the cylinder, no ridge, no problem.
>
> Here are the pics. Any feedback on the condition of this piston or what
the
> pic might tell you would be appreciated.
>
> http://members.bigvalley.net/wuji/je.../piston_2a.jpg
> http://members.bigvalley.net/wuji/je.../piston_2b.jpg
> http://members.bigvalley.net/wuji/je...berrings2a.jpg
>
> Thanks,
>
>
> Bill
>
Bill, can you get a picture of the cylinder itself so that we can see the
finish on it?
Chris
Guest
Posts: n/a
Re: #2 Piston Pics - Got it out!!! Need feedback
Hi Bill,
Nope, I just scrap the big stuff off. And use an old broken ring to
scrap out the groves, being careful not to gouge their sides. Chemicals
strong enough to remove carbon usually eat the aluminum.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Thanks for the help Bill.
>
> Is there an easy way to clean up this piston before I ring it?
>
> Thanks,
>
> Bill
Nope, I just scrap the big stuff off. And use an old broken ring to
scrap out the groves, being careful not to gouge their sides. Chemicals
strong enough to remove carbon usually eat the aluminum.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Thanks for the help Bill.
>
> Is there an easy way to clean up this piston before I ring it?
>
> Thanks,
>
> Bill
Guest
Posts: n/a
Re: #2 Piston Pics - Got it out!!! Need feedback
Hi Bill,
Nope, I just scrap the big stuff off. And use an old broken ring to
scrap out the groves, being careful not to gouge their sides. Chemicals
strong enough to remove carbon usually eat the aluminum.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Thanks for the help Bill.
>
> Is there an easy way to clean up this piston before I ring it?
>
> Thanks,
>
> Bill
Nope, I just scrap the big stuff off. And use an old broken ring to
scrap out the groves, being careful not to gouge their sides. Chemicals
strong enough to remove carbon usually eat the aluminum.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Thanks for the help Bill.
>
> Is there an easy way to clean up this piston before I ring it?
>
> Thanks,
>
> Bill
