1999 Grand Cherokee Jack points
06-22-2007, 09:54 PM
#21
Guest
Posts: n/a
Re: 1999 Grand Cherokee Jack points
Anthony T wrote:
> Thanks Doug,
> I thought I could put a jack stand on the outer edges of the axle
> tube with no damage. I noticed you have the cross drilled rotors...I
> just bought a set from Stillen. However, Stillen told me that the
> holes on the rotors should face forward i.e. opposite of what you
> have in the photo. I was just wondering if it matters which way the
> holes spin? Thoughts.
Dunno. These came with a sticker for direction of rotation and I
followed that. I think it matters more the vent pattern inside
the rotor. Those had 80,000 miles on them when I took that photo.
Here is another pic from 4x4wire
http://www.4x4wire.com/reviews/still...ttedRotors.jpg
And NAGCA
http://www.nagca.com/grandtech/still...akeupgrade.htm
Could be Stillen changed the design. You might want to send
them one of those links (or mine) and ask if that's the right way.
What ever you do, if you put on new rotors it's critical you follow
stillen's breakin procedure. I've seen folks that didn't and the
rotors just don't last.
--
DougW
> Thanks Doug,
> I thought I could put a jack stand on the outer edges of the axle
> tube with no damage. I noticed you have the cross drilled rotors...I
> just bought a set from Stillen. However, Stillen told me that the
> holes on the rotors should face forward i.e. opposite of what you
> have in the photo. I was just wondering if it matters which way the
> holes spin? Thoughts.
Dunno. These came with a sticker for direction of rotation and I
followed that. I think it matters more the vent pattern inside
the rotor. Those had 80,000 miles on them when I took that photo.
Here is another pic from 4x4wire
http://www.4x4wire.com/reviews/still...ttedRotors.jpg
And NAGCA
http://www.nagca.com/grandtech/still...akeupgrade.htm
Could be Stillen changed the design. You might want to send
them one of those links (or mine) and ask if that's the right way.
What ever you do, if you put on new rotors it's critical you follow
stillen's breakin procedure. I've seen folks that didn't and the
rotors just don't last.
--
DougW
06-22-2007, 10:45 PM
#22
Guest
Posts: n/a
Re: 1999 Grand Cherokee Jack points
Doug,
thanks again. I sent Stillen the links and asked which way to mount. My
rotors did not come with any indication of which rotor goes on which side.
Thanks again.
"DougW" <post.replies@invalid.address> wrote in message
news:63%ei.2434$Zg5.1597@newsfe19.lga...
> Anthony T wrote:
>> Thanks Doug,
>> I thought I could put a jack stand on the outer edges of the axle
>> tube with no damage. I noticed you have the cross drilled rotors...I
>> just bought a set from Stillen. However, Stillen told me that the
>> holes on the rotors should face forward i.e. opposite of what you
>> have in the photo. I was just wondering if it matters which way the
>> holes spin? Thoughts.
>
> Dunno. These came with a sticker for direction of rotation and I
> followed that. I think it matters more the vent pattern inside
> the rotor. Those had 80,000 miles on them when I took that photo.
>
> Here is another pic from 4x4wire
> http://www.4x4wire.com/reviews/still...ttedRotors.jpg
>
> And NAGCA
> http://www.nagca.com/grandtech/still...akeupgrade.htm
>
> Could be Stillen changed the design. You might want to send
> them one of those links (or mine) and ask if that's the right way.
>
> What ever you do, if you put on new rotors it's critical you follow
> stillen's breakin procedure. I've seen folks that didn't and the
> rotors just don't last.
>
> --
> DougW
>
thanks again. I sent Stillen the links and asked which way to mount. My
rotors did not come with any indication of which rotor goes on which side.
Thanks again.
"DougW" <post.replies@invalid.address> wrote in message
news:63%ei.2434$Zg5.1597@newsfe19.lga...
> Anthony T wrote:
>> Thanks Doug,
>> I thought I could put a jack stand on the outer edges of the axle
>> tube with no damage. I noticed you have the cross drilled rotors...I
>> just bought a set from Stillen. However, Stillen told me that the
>> holes on the rotors should face forward i.e. opposite of what you
>> have in the photo. I was just wondering if it matters which way the
>> holes spin? Thoughts.
>
> Dunno. These came with a sticker for direction of rotation and I
> followed that. I think it matters more the vent pattern inside
> the rotor. Those had 80,000 miles on them when I took that photo.
>
> Here is another pic from 4x4wire
> http://www.4x4wire.com/reviews/still...ttedRotors.jpg
>
> And NAGCA
> http://www.nagca.com/grandtech/still...akeupgrade.htm
>
> Could be Stillen changed the design. You might want to send
> them one of those links (or mine) and ask if that's the right way.
>
> What ever you do, if you put on new rotors it's critical you follow
> stillen's breakin procedure. I've seen folks that didn't and the
> rotors just don't last.
>
> --
> DougW
>
06-22-2007, 10:45 PM
#23
Guest
Posts: n/a
Re: 1999 Grand Cherokee Jack points
Doug,
thanks again. I sent Stillen the links and asked which way to mount. My
rotors did not come with any indication of which rotor goes on which side.
Thanks again.
"DougW" <post.replies@invalid.address> wrote in message
news:63%ei.2434$Zg5.1597@newsfe19.lga...
> Anthony T wrote:
>> Thanks Doug,
>> I thought I could put a jack stand on the outer edges of the axle
>> tube with no damage. I noticed you have the cross drilled rotors...I
>> just bought a set from Stillen. However, Stillen told me that the
>> holes on the rotors should face forward i.e. opposite of what you
>> have in the photo. I was just wondering if it matters which way the
>> holes spin? Thoughts.
>
> Dunno. These came with a sticker for direction of rotation and I
> followed that. I think it matters more the vent pattern inside
> the rotor. Those had 80,000 miles on them when I took that photo.
>
> Here is another pic from 4x4wire
> http://www.4x4wire.com/reviews/still...ttedRotors.jpg
>
> And NAGCA
> http://www.nagca.com/grandtech/still...akeupgrade.htm
>
> Could be Stillen changed the design. You might want to send
> them one of those links (or mine) and ask if that's the right way.
>
> What ever you do, if you put on new rotors it's critical you follow
> stillen's breakin procedure. I've seen folks that didn't and the
> rotors just don't last.
>
> --
> DougW
>
thanks again. I sent Stillen the links and asked which way to mount. My
rotors did not come with any indication of which rotor goes on which side.
Thanks again.
"DougW" <post.replies@invalid.address> wrote in message
news:63%ei.2434$Zg5.1597@newsfe19.lga...
> Anthony T wrote:
>> Thanks Doug,
>> I thought I could put a jack stand on the outer edges of the axle
>> tube with no damage. I noticed you have the cross drilled rotors...I
>> just bought a set from Stillen. However, Stillen told me that the
>> holes on the rotors should face forward i.e. opposite of what you
>> have in the photo. I was just wondering if it matters which way the
>> holes spin? Thoughts.
>
> Dunno. These came with a sticker for direction of rotation and I
> followed that. I think it matters more the vent pattern inside
> the rotor. Those had 80,000 miles on them when I took that photo.
>
> Here is another pic from 4x4wire
> http://www.4x4wire.com/reviews/still...ttedRotors.jpg
>
> And NAGCA
> http://www.nagca.com/grandtech/still...akeupgrade.htm
>
> Could be Stillen changed the design. You might want to send
> them one of those links (or mine) and ask if that's the right way.
>
> What ever you do, if you put on new rotors it's critical you follow
> stillen's breakin procedure. I've seen folks that didn't and the
> rotors just don't last.
>
> --
> DougW
>
06-22-2007, 10:45 PM
#24
Guest
Posts: n/a
Re: 1999 Grand Cherokee Jack points
Doug,
thanks again. I sent Stillen the links and asked which way to mount. My
rotors did not come with any indication of which rotor goes on which side.
Thanks again.
"DougW" <post.replies@invalid.address> wrote in message
news:63%ei.2434$Zg5.1597@newsfe19.lga...
> Anthony T wrote:
>> Thanks Doug,
>> I thought I could put a jack stand on the outer edges of the axle
>> tube with no damage. I noticed you have the cross drilled rotors...I
>> just bought a set from Stillen. However, Stillen told me that the
>> holes on the rotors should face forward i.e. opposite of what you
>> have in the photo. I was just wondering if it matters which way the
>> holes spin? Thoughts.
>
> Dunno. These came with a sticker for direction of rotation and I
> followed that. I think it matters more the vent pattern inside
> the rotor. Those had 80,000 miles on them when I took that photo.
>
> Here is another pic from 4x4wire
> http://www.4x4wire.com/reviews/still...ttedRotors.jpg
>
> And NAGCA
> http://www.nagca.com/grandtech/still...akeupgrade.htm
>
> Could be Stillen changed the design. You might want to send
> them one of those links (or mine) and ask if that's the right way.
>
> What ever you do, if you put on new rotors it's critical you follow
> stillen's breakin procedure. I've seen folks that didn't and the
> rotors just don't last.
>
> --
> DougW
>
thanks again. I sent Stillen the links and asked which way to mount. My
rotors did not come with any indication of which rotor goes on which side.
Thanks again.
"DougW" <post.replies@invalid.address> wrote in message
news:63%ei.2434$Zg5.1597@newsfe19.lga...
> Anthony T wrote:
>> Thanks Doug,
>> I thought I could put a jack stand on the outer edges of the axle
>> tube with no damage. I noticed you have the cross drilled rotors...I
>> just bought a set from Stillen. However, Stillen told me that the
>> holes on the rotors should face forward i.e. opposite of what you
>> have in the photo. I was just wondering if it matters which way the
>> holes spin? Thoughts.
>
> Dunno. These came with a sticker for direction of rotation and I
> followed that. I think it matters more the vent pattern inside
> the rotor. Those had 80,000 miles on them when I took that photo.
>
> Here is another pic from 4x4wire
> http://www.4x4wire.com/reviews/still...ttedRotors.jpg
>
> And NAGCA
> http://www.nagca.com/grandtech/still...akeupgrade.htm
>
> Could be Stillen changed the design. You might want to send
> them one of those links (or mine) and ask if that's the right way.
>
> What ever you do, if you put on new rotors it's critical you follow
> stillen's breakin procedure. I've seen folks that didn't and the
> rotors just don't last.
>
> --
> DougW
>
06-22-2007, 10:45 PM
#25
Guest
Posts: n/a
Re: 1999 Grand Cherokee Jack points
Doug,
thanks again. I sent Stillen the links and asked which way to mount. My
rotors did not come with any indication of which rotor goes on which side.
Thanks again.
"DougW" <post.replies@invalid.address> wrote in message
news:63%ei.2434$Zg5.1597@newsfe19.lga...
> Anthony T wrote:
>> Thanks Doug,
>> I thought I could put a jack stand on the outer edges of the axle
>> tube with no damage. I noticed you have the cross drilled rotors...I
>> just bought a set from Stillen. However, Stillen told me that the
>> holes on the rotors should face forward i.e. opposite of what you
>> have in the photo. I was just wondering if it matters which way the
>> holes spin? Thoughts.
>
> Dunno. These came with a sticker for direction of rotation and I
> followed that. I think it matters more the vent pattern inside
> the rotor. Those had 80,000 miles on them when I took that photo.
>
> Here is another pic from 4x4wire
> http://www.4x4wire.com/reviews/still...ttedRotors.jpg
>
> And NAGCA
> http://www.nagca.com/grandtech/still...akeupgrade.htm
>
> Could be Stillen changed the design. You might want to send
> them one of those links (or mine) and ask if that's the right way.
>
> What ever you do, if you put on new rotors it's critical you follow
> stillen's breakin procedure. I've seen folks that didn't and the
> rotors just don't last.
>
> --
> DougW
>
thanks again. I sent Stillen the links and asked which way to mount. My
rotors did not come with any indication of which rotor goes on which side.
Thanks again.
"DougW" <post.replies@invalid.address> wrote in message
news:63%ei.2434$Zg5.1597@newsfe19.lga...
> Anthony T wrote:
>> Thanks Doug,
>> I thought I could put a jack stand on the outer edges of the axle
>> tube with no damage. I noticed you have the cross drilled rotors...I
>> just bought a set from Stillen. However, Stillen told me that the
>> holes on the rotors should face forward i.e. opposite of what you
>> have in the photo. I was just wondering if it matters which way the
>> holes spin? Thoughts.
>
> Dunno. These came with a sticker for direction of rotation and I
> followed that. I think it matters more the vent pattern inside
> the rotor. Those had 80,000 miles on them when I took that photo.
>
> Here is another pic from 4x4wire
> http://www.4x4wire.com/reviews/still...ttedRotors.jpg
>
> And NAGCA
> http://www.nagca.com/grandtech/still...akeupgrade.htm
>
> Could be Stillen changed the design. You might want to send
> them one of those links (or mine) and ask if that's the right way.
>
> What ever you do, if you put on new rotors it's critical you follow
> stillen's breakin procedure. I've seen folks that didn't and the
> rotors just don't last.
>
> --
> DougW
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)