"dave AKA vwdoc1" <vwdoc1@ameritech.net> wrote in message news:<DBupd.32489$Qv5.28362@newssvr33.news.prodigy .com>...
> Maybe an ign switch problem or a relay? Overheats and connection gets lost
> for a bit.
> What happens to the tach when it dies? Does it drop right to zero?
> How is that fuel filter and fuel pump connection?
> later,
> dave AKA vwdoc1
>
> "Greg" <gtspeck@***.net> wrote in message
> news:6306b23e.0411250451.33d28b29@posting.google.c om...
> > gtspeck@***.net (Greg) wrote in message
> > news:<6306b23e.0411130448.341baeef@posting.google. com>...
> >> Need some help!
> >>
> >> After driving 150 miles, averaging 70 miles per hour, my 1998 jeep
> >> wranger cuts off. When I pull over it cranks right up. Then after 20
> >> or 30 additional miles it does the same thing.
> >>
> >> No check engine light comes on.
> >>
> >> I have already changed the o2 sensor.
> >>
> >> Any ideas?
> >>
> >> Greg
> >
> > Well, I changed the crankshaft position sensor, didn't solve the
> > problem. Went to 2 different Jeep dealers, they couldn't find the
> > problem since no codes were stored in the computer.
> >
> > Greg


No the tach does not drop down to zero. When I push the clutch in it
will idle. The further I drive the worse it gets.

 

"dave AKA vwdoc1" <vwdoc1@ameritech.net> wrote in message news:<DBupd.32489$Qv5.28362@newssvr33.news.prodigy .com>...
> Maybe an ign switch problem or a relay? Overheats and connection gets lost
> for a bit.
> What happens to the tach when it dies? Does it drop right to zero?
> How is that fuel filter and fuel pump connection?
> later,
> dave AKA vwdoc1
>
> "Greg" <gtspeck@***.net> wrote in message
> news:6306b23e.0411250451.33d28b29@posting.google.c om...
> > gtspeck@***.net (Greg) wrote in message
> > news:<6306b23e.0411130448.341baeef@posting.google. com>...
> >> Need some help!
> >>
> >> After driving 150 miles, averaging 70 miles per hour, my 1998 jeep
> >> wranger cuts off. When I pull over it cranks right up. Then after 20
> >> or 30 additional miles it does the same thing.
> >>
> >> No check engine light comes on.
> >>
> >> I have already changed the o2 sensor.
> >>
> >> Any ideas?
> >>
> >> Greg
> >
> > Well, I changed the crankshaft position sensor, didn't solve the
> > problem. Went to 2 different Jeep dealers, they couldn't find the
> > problem since no codes were stored in the computer.
> >
> > Greg


No the tach does not drop down to zero. When I push the clutch in it
will idle. The further I drive the worse it gets.