1997 GC repair adventure
07-20-2006, 09:16 PM
#12
Guest
Posts: n/a
Re: 1997 GC repair adventure
TM wrote:
> Yup, that's the vent tube for the front axle. If you can't find the
> clips that
> hold it in place, secure the free end up so that it is above the axle
> height (prevents gravity from possibly draining your dif.).
The clips are molded into the side of the airbox.
Mine broke and I wound up using a ziptie onto one of the hard
lines.
--
DougW
> Yup, that's the vent tube for the front axle. If you can't find the
> clips that
> hold it in place, secure the free end up so that it is above the axle
> height (prevents gravity from possibly draining your dif.).
The clips are molded into the side of the airbox.
Mine broke and I wound up using a ziptie onto one of the hard
lines.
--
DougW
07-20-2006, 09:16 PM
#13
Guest
Posts: n/a
Re: 1997 GC repair adventure
TM wrote:
> Yup, that's the vent tube for the front axle. If you can't find the
> clips that
> hold it in place, secure the free end up so that it is above the axle
> height (prevents gravity from possibly draining your dif.).
The clips are molded into the side of the airbox.
Mine broke and I wound up using a ziptie onto one of the hard
lines.
--
DougW
> Yup, that's the vent tube for the front axle. If you can't find the
> clips that
> hold it in place, secure the free end up so that it is above the axle
> height (prevents gravity from possibly draining your dif.).
The clips are molded into the side of the airbox.
Mine broke and I wound up using a ziptie onto one of the hard
lines.
--
DougW
07-20-2006, 09:16 PM
#14
Guest
Posts: n/a
Re: 1997 GC repair adventure
TM wrote:
> Yup, that's the vent tube for the front axle. If you can't find the
> clips that
> hold it in place, secure the free end up so that it is above the axle
> height (prevents gravity from possibly draining your dif.).
The clips are molded into the side of the airbox.
Mine broke and I wound up using a ziptie onto one of the hard
lines.
--
DougW
> Yup, that's the vent tube for the front axle. If you can't find the
> clips that
> hold it in place, secure the free end up so that it is above the axle
> height (prevents gravity from possibly draining your dif.).
The clips are molded into the side of the airbox.
Mine broke and I wound up using a ziptie onto one of the hard
lines.
--
DougW
07-20-2006, 09:16 PM
#15
Guest
Posts: n/a
Re: 1997 GC repair adventure
TM wrote:
> Yup, that's the vent tube for the front axle. If you can't find the
> clips that
> hold it in place, secure the free end up so that it is above the axle
> height (prevents gravity from possibly draining your dif.).
The clips are molded into the side of the airbox.
Mine broke and I wound up using a ziptie onto one of the hard
lines.
--
DougW
> Yup, that's the vent tube for the front axle. If you can't find the
> clips that
> hold it in place, secure the free end up so that it is above the axle
> height (prevents gravity from possibly draining your dif.).
The clips are molded into the side of the airbox.
Mine broke and I wound up using a ziptie onto one of the hard
lines.
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
springs@mail.gr
Jeep Mailing List
0
05-02-2007 09:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
