1994 Jeep Cherokee 4WD Automatic Transmission questions
02-12-2005, 09:04 PM
#1
Guest
Posts: n/a
1994 Jeep Cherokee 4WD Automatic Transmission questions
Hi,
My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
is in need of a new transmission. I decided to pick up a used 1 from a
junk yard.
A couple of questions:
1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
matter as far as picking the transmission?
2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
yard has 1 of those in stock now). Also, can anyone tell which types &
years of Jeeps have the same type of transmissions? For example, will
a '96 transmission fit a '94 Cherokee, etc? I had heard that Jeep used
the same type of transmission over the course of several years, and,
perhaps on multiple vehicles (regular Cherokee, Grand Cherokee, etc).
Can anyone verify this?
I have tried to find the answer to these questions on the internet, to
no avail - I was searching online when I found this newsgroup, and
started searching through it & haven't been able to find the answer to
my specific questions, so if someone could help me out, I would be
most appreciative.
Thanks,
brookman1973
My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
is in need of a new transmission. I decided to pick up a used 1 from a
junk yard.
A couple of questions:
1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
matter as far as picking the transmission?
2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
yard has 1 of those in stock now). Also, can anyone tell which types &
years of Jeeps have the same type of transmissions? For example, will
a '96 transmission fit a '94 Cherokee, etc? I had heard that Jeep used
the same type of transmission over the course of several years, and,
perhaps on multiple vehicles (regular Cherokee, Grand Cherokee, etc).
Can anyone verify this?
I have tried to find the answer to these questions on the internet, to
no avail - I was searching online when I found this newsgroup, and
started searching through it & haven't been able to find the answer to
my specific questions, so if someone could help me out, I would be
most appreciative.
Thanks,
brookman1973
02-12-2005, 10:23 PM
#2
Guest
Posts: n/a
Re: 1994 Jeep Cherokee 4WD Automatic Transmission questions
On 12 Feb 2005 18:04:34 -0800, "brookman1973" <brookman1973@yahoo.com>
wrote:
>Hi,
>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>is in need of a new transmission. I decided to pick up a used 1 from a
>junk yard.
>
>A couple of questions:
>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>matter as far as picking the transmission?
>
>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>yard has 1 of those in stock now).
I can take a stab at some of your questions. I don't have the info on
the '94, but I do have some on the '93. Don't think it's different
for '94.
The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
The Selec-Trac required the auto transmission. You probably have the
Select-Trac.
Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
be able to tell by looking at your shift lever markings.
----
wrote:
>Hi,
>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>is in need of a new transmission. I decided to pick up a used 1 from a
>junk yard.
>
>A couple of questions:
>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>matter as far as picking the transmission?
>
>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>yard has 1 of those in stock now).
I can take a stab at some of your questions. I don't have the info on
the '94, but I do have some on the '93. Don't think it's different
for '94.
The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
The Selec-Trac required the auto transmission. You probably have the
Select-Trac.
Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
be able to tell by looking at your shift lever markings.
----
02-12-2005, 10:23 PM
#3
Guest
Posts: n/a
Re: 1994 Jeep Cherokee 4WD Automatic Transmission questions
On 12 Feb 2005 18:04:34 -0800, "brookman1973" <brookman1973@yahoo.com>
wrote:
>Hi,
>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>is in need of a new transmission. I decided to pick up a used 1 from a
>junk yard.
>
>A couple of questions:
>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>matter as far as picking the transmission?
>
>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>yard has 1 of those in stock now).
I can take a stab at some of your questions. I don't have the info on
the '94, but I do have some on the '93. Don't think it's different
for '94.
The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
The Selec-Trac required the auto transmission. You probably have the
Select-Trac.
Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
be able to tell by looking at your shift lever markings.
----
wrote:
>Hi,
>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>is in need of a new transmission. I decided to pick up a used 1 from a
>junk yard.
>
>A couple of questions:
>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>matter as far as picking the transmission?
>
>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>yard has 1 of those in stock now).
I can take a stab at some of your questions. I don't have the info on
the '94, but I do have some on the '93. Don't think it's different
for '94.
The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
The Selec-Trac required the auto transmission. You probably have the
Select-Trac.
Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
be able to tell by looking at your shift lever markings.
----
02-12-2005, 10:23 PM
#4
Guest
Posts: n/a
Re: 1994 Jeep Cherokee 4WD Automatic Transmission questions
On 12 Feb 2005 18:04:34 -0800, "brookman1973" <brookman1973@yahoo.com>
wrote:
>Hi,
>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>is in need of a new transmission. I decided to pick up a used 1 from a
>junk yard.
>
>A couple of questions:
>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>matter as far as picking the transmission?
>
>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>yard has 1 of those in stock now).
I can take a stab at some of your questions. I don't have the info on
the '94, but I do have some on the '93. Don't think it's different
for '94.
The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
The Selec-Trac required the auto transmission. You probably have the
Select-Trac.
Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
be able to tell by looking at your shift lever markings.
----
wrote:
>Hi,
>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>is in need of a new transmission. I decided to pick up a used 1 from a
>junk yard.
>
>A couple of questions:
>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>matter as far as picking the transmission?
>
>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>yard has 1 of those in stock now).
I can take a stab at some of your questions. I don't have the info on
the '94, but I do have some on the '93. Don't think it's different
for '94.
The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
The Selec-Trac required the auto transmission. You probably have the
Select-Trac.
Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
be able to tell by looking at your shift lever markings.
----
02-12-2005, 10:59 PM
#5
Guest
Posts: n/a
Re: 1994 Jeep Cherokee 4WD Automatic Transmission questions
New Process Gear
"----" <LeadWinger> wrote in message
news:jsgt01tnjorhd0q03v09ivo15equ2ajigb@4ax.com...
> On 12 Feb 2005 18:04:34 -0800, "brookman1973" <brookman1973@yahoo.com>
> wrote:
>
>>Hi,
>>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>>is in need of a new transmission. I decided to pick up a used 1 from a
>>junk yard.
>>
>>A couple of questions:
>>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>>matter as far as picking the transmission?
>>
>>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>>yard has 1 of those in stock now).
>
> I can take a stab at some of your questions. I don't have the info on
> the '94, but I do have some on the '93. Don't think it's different
> for '94.
>
> The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
> the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
>
> The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
> The Selec-Trac required the auto transmission. You probably have the
> Select-Trac.
>
> Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
> Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
> High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
> be able to tell by looking at your shift lever markings.
>
> ----
>
>
>
>
"----" <LeadWinger> wrote in message
news:jsgt01tnjorhd0q03v09ivo15equ2ajigb@4ax.com...
> On 12 Feb 2005 18:04:34 -0800, "brookman1973" <brookman1973@yahoo.com>
> wrote:
>
>>Hi,
>>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>>is in need of a new transmission. I decided to pick up a used 1 from a
>>junk yard.
>>
>>A couple of questions:
>>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>>matter as far as picking the transmission?
>>
>>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>>yard has 1 of those in stock now).
>
> I can take a stab at some of your questions. I don't have the info on
> the '94, but I do have some on the '93. Don't think it's different
> for '94.
>
> The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
> the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
>
> The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
> The Selec-Trac required the auto transmission. You probably have the
> Select-Trac.
>
> Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
> Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
> High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
> be able to tell by looking at your shift lever markings.
>
> ----
>
>
>
>
02-12-2005, 10:59 PM
#6
Guest
Posts: n/a
Re: 1994 Jeep Cherokee 4WD Automatic Transmission questions
New Process Gear
"----" <LeadWinger> wrote in message
news:jsgt01tnjorhd0q03v09ivo15equ2ajigb@4ax.com...
> On 12 Feb 2005 18:04:34 -0800, "brookman1973" <brookman1973@yahoo.com>
> wrote:
>
>>Hi,
>>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>>is in need of a new transmission. I decided to pick up a used 1 from a
>>junk yard.
>>
>>A couple of questions:
>>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>>matter as far as picking the transmission?
>>
>>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>>yard has 1 of those in stock now).
>
> I can take a stab at some of your questions. I don't have the info on
> the '94, but I do have some on the '93. Don't think it's different
> for '94.
>
> The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
> the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
>
> The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
> The Selec-Trac required the auto transmission. You probably have the
> Select-Trac.
>
> Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
> Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
> High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
> be able to tell by looking at your shift lever markings.
>
> ----
>
>
>
>
"----" <LeadWinger> wrote in message
news:jsgt01tnjorhd0q03v09ivo15equ2ajigb@4ax.com...
> On 12 Feb 2005 18:04:34 -0800, "brookman1973" <brookman1973@yahoo.com>
> wrote:
>
>>Hi,
>>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>>is in need of a new transmission. I decided to pick up a used 1 from a
>>junk yard.
>>
>>A couple of questions:
>>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>>matter as far as picking the transmission?
>>
>>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>>yard has 1 of those in stock now).
>
> I can take a stab at some of your questions. I don't have the info on
> the '94, but I do have some on the '93. Don't think it's different
> for '94.
>
> The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
> the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
>
> The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
> The Selec-Trac required the auto transmission. You probably have the
> Select-Trac.
>
> Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
> Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
> High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
> be able to tell by looking at your shift lever markings.
>
> ----
>
>
>
>
02-12-2005, 10:59 PM
#7
Guest
Posts: n/a
Re: 1994 Jeep Cherokee 4WD Automatic Transmission questions
New Process Gear
"----" <LeadWinger> wrote in message
news:jsgt01tnjorhd0q03v09ivo15equ2ajigb@4ax.com...
> On 12 Feb 2005 18:04:34 -0800, "brookman1973" <brookman1973@yahoo.com>
> wrote:
>
>>Hi,
>>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>>is in need of a new transmission. I decided to pick up a used 1 from a
>>junk yard.
>>
>>A couple of questions:
>>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>>matter as far as picking the transmission?
>>
>>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>>yard has 1 of those in stock now).
>
> I can take a stab at some of your questions. I don't have the info on
> the '94, but I do have some on the '93. Don't think it's different
> for '94.
>
> The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
> the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
>
> The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
> The Selec-Trac required the auto transmission. You probably have the
> Select-Trac.
>
> Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
> Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
> High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
> be able to tell by looking at your shift lever markings.
>
> ----
>
>
>
>
"----" <LeadWinger> wrote in message
news:jsgt01tnjorhd0q03v09ivo15equ2ajigb@4ax.com...
> On 12 Feb 2005 18:04:34 -0800, "brookman1973" <brookman1973@yahoo.com>
> wrote:
>
>>Hi,
>>My '94 Jeep Cherokee 4.0L Inline 6 cyl, 4WD w/ Automatic Transmission
>>is in need of a new transmission. I decided to pick up a used 1 from a
>>junk yard.
>>
>>A couple of questions:
>>1.) Does my Cherokee have Command-Trac or Select-Trac, and does that
>>matter as far as picking the transmission?
>>
>>2.) Will a transmission from a '92 Grand Cherokee fit it (a local junk
>>yard has 1 of those in stock now).
>
> I can take a stab at some of your questions. I don't have the info on
> the '94, but I do have some on the '93. Don't think it's different
> for '94.
>
> The Grand Cherokee used theNPG231 Command-Trac, NPG242 Selec-Trac and
> the NPG 249 Quadra-Trac. I don't know what the G stood for (Grand?)
>
> The Cherokee used the NP231 Command-Trac and the NP242 Selec-Trac.
> The Selec-Trac required the auto transmission. You probably have the
> Select-Trac.
>
> Command-Trac is a part time transfer case with 2WD, 4WD High and 4WD
> Low settings. Selec-Trac is a full-time transfer case with 2WD, 4WD
> High Full-Time, 4WD High Part-Time and 4WD Low settings. You should
> be able to tell by looking at your shift lever markings.
>
> ----
>
>
>
>
