1992 Wrangler YJ Tranny Problem
04-29-2005, 02:46 PM
#1
Guest
Posts: n/a
1992 Wrangler YJ Tranny Problem
I have a 1992 Wrangler YJ with 2.5L engine, 5 speed tranny. This morning
as I headed to work all seemed well, until I hit 5th gear. When I shifted in
to 5th gear and let out the clutch there was a terrible grinding noise
coming from the tranny. I shifted back to 4th and all was well again. Went
back to 5th and grinding. So, I drove in to the office in 4th.
The Wrangler has about 145,000 miles on it if that helps. Any ideas?
Anyone know an decent and honest Jeep repair person near west central
Indiana? The dealerships here are not too good to work with.
Thanks!
Tim
as I headed to work all seemed well, until I hit 5th gear. When I shifted in
to 5th gear and let out the clutch there was a terrible grinding noise
coming from the tranny. I shifted back to 4th and all was well again. Went
back to 5th and grinding. So, I drove in to the office in 4th.
The Wrangler has about 145,000 miles on it if that helps. Any ideas?
Anyone know an decent and honest Jeep repair person near west central
Indiana? The dealerships here are not too good to work with.
Thanks!
Tim
04-29-2005, 04:24 PM
#2
Guest
Posts: n/a
Re: 1992 Wrangler YJ Tranny Problem
Hi Tim,
Lugging it in fifth, causes the snap ring on the back of the main
shaft, to give up:
http://groups-beta.google.com/group/...cf5aa08c8c149a
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tim Cottom wrote:
>
> I have a 1992 Wrangler YJ with 2.5L engine, 5 speed tranny. This morning
> as I headed to work all seemed well, until I hit 5th gear. When I shifted in
> to 5th gear and let out the clutch there was a terrible grinding noise
> coming from the tranny. I shifted back to 4th and all was well again. Went
> back to 5th and grinding. So, I drove in to the office in 4th.
> The Wrangler has about 145,000 miles on it if that helps. Any ideas?
> Anyone know an decent and honest Jeep repair person near west central
> Indiana? The dealerships here are not too good to work with.
>
> Thanks!
> Tim
Lugging it in fifth, causes the snap ring on the back of the main
shaft, to give up:
http://groups-beta.google.com/group/...cf5aa08c8c149a
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tim Cottom wrote:
>
> I have a 1992 Wrangler YJ with 2.5L engine, 5 speed tranny. This morning
> as I headed to work all seemed well, until I hit 5th gear. When I shifted in
> to 5th gear and let out the clutch there was a terrible grinding noise
> coming from the tranny. I shifted back to 4th and all was well again. Went
> back to 5th and grinding. So, I drove in to the office in 4th.
> The Wrangler has about 145,000 miles on it if that helps. Any ideas?
> Anyone know an decent and honest Jeep repair person near west central
> Indiana? The dealerships here are not too good to work with.
>
> Thanks!
> Tim
04-29-2005, 04:24 PM
#3
Guest
Posts: n/a
Re: 1992 Wrangler YJ Tranny Problem
Hi Tim,
Lugging it in fifth, causes the snap ring on the back of the main
shaft, to give up:
http://groups-beta.google.com/group/...cf5aa08c8c149a
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tim Cottom wrote:
>
> I have a 1992 Wrangler YJ with 2.5L engine, 5 speed tranny. This morning
> as I headed to work all seemed well, until I hit 5th gear. When I shifted in
> to 5th gear and let out the clutch there was a terrible grinding noise
> coming from the tranny. I shifted back to 4th and all was well again. Went
> back to 5th and grinding. So, I drove in to the office in 4th.
> The Wrangler has about 145,000 miles on it if that helps. Any ideas?
> Anyone know an decent and honest Jeep repair person near west central
> Indiana? The dealerships here are not too good to work with.
>
> Thanks!
> Tim
Lugging it in fifth, causes the snap ring on the back of the main
shaft, to give up:
http://groups-beta.google.com/group/...cf5aa08c8c149a
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tim Cottom wrote:
>
> I have a 1992 Wrangler YJ with 2.5L engine, 5 speed tranny. This morning
> as I headed to work all seemed well, until I hit 5th gear. When I shifted in
> to 5th gear and let out the clutch there was a terrible grinding noise
> coming from the tranny. I shifted back to 4th and all was well again. Went
> back to 5th and grinding. So, I drove in to the office in 4th.
> The Wrangler has about 145,000 miles on it if that helps. Any ideas?
> Anyone know an decent and honest Jeep repair person near west central
> Indiana? The dealerships here are not too good to work with.
>
> Thanks!
> Tim
04-29-2005, 04:24 PM
#4
Guest
Posts: n/a
Re: 1992 Wrangler YJ Tranny Problem
Hi Tim,
Lugging it in fifth, causes the snap ring on the back of the main
shaft, to give up:
http://groups-beta.google.com/group/...cf5aa08c8c149a
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tim Cottom wrote:
>
> I have a 1992 Wrangler YJ with 2.5L engine, 5 speed tranny. This morning
> as I headed to work all seemed well, until I hit 5th gear. When I shifted in
> to 5th gear and let out the clutch there was a terrible grinding noise
> coming from the tranny. I shifted back to 4th and all was well again. Went
> back to 5th and grinding. So, I drove in to the office in 4th.
> The Wrangler has about 145,000 miles on it if that helps. Any ideas?
> Anyone know an decent and honest Jeep repair person near west central
> Indiana? The dealerships here are not too good to work with.
>
> Thanks!
> Tim
Lugging it in fifth, causes the snap ring on the back of the main
shaft, to give up:
http://groups-beta.google.com/group/...cf5aa08c8c149a
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tim Cottom wrote:
>
> I have a 1992 Wrangler YJ with 2.5L engine, 5 speed tranny. This morning
> as I headed to work all seemed well, until I hit 5th gear. When I shifted in
> to 5th gear and let out the clutch there was a terrible grinding noise
> coming from the tranny. I shifted back to 4th and all was well again. Went
> back to 5th and grinding. So, I drove in to the office in 4th.
> The Wrangler has about 145,000 miles on it if that helps. Any ideas?
> Anyone know an decent and honest Jeep repair person near west central
> Indiana? The dealerships here are not too good to work with.
>
> Thanks!
> Tim
04-29-2005, 04:24 PM
#5
Guest
Posts: n/a
Re: 1992 Wrangler YJ Tranny Problem
Hi Tim,
Lugging it in fifth, causes the snap ring on the back of the main
shaft, to give up:
http://groups-beta.google.com/group/...cf5aa08c8c149a
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tim Cottom wrote:
>
> I have a 1992 Wrangler YJ with 2.5L engine, 5 speed tranny. This morning
> as I headed to work all seemed well, until I hit 5th gear. When I shifted in
> to 5th gear and let out the clutch there was a terrible grinding noise
> coming from the tranny. I shifted back to 4th and all was well again. Went
> back to 5th and grinding. So, I drove in to the office in 4th.
> The Wrangler has about 145,000 miles on it if that helps. Any ideas?
> Anyone know an decent and honest Jeep repair person near west central
> Indiana? The dealerships here are not too good to work with.
>
> Thanks!
> Tim
Lugging it in fifth, causes the snap ring on the back of the main
shaft, to give up:
http://groups-beta.google.com/group/...cf5aa08c8c149a
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tim Cottom wrote:
>
> I have a 1992 Wrangler YJ with 2.5L engine, 5 speed tranny. This morning
> as I headed to work all seemed well, until I hit 5th gear. When I shifted in
> to 5th gear and let out the clutch there was a terrible grinding noise
> coming from the tranny. I shifted back to 4th and all was well again. Went
> back to 5th and grinding. So, I drove in to the office in 4th.
> The Wrangler has about 145,000 miles on it if that helps. Any ideas?
> Anyone know an decent and honest Jeep repair person near west central
> Indiana? The dealerships here are not too good to work with.
>
> Thanks!
> Tim
Thread
Thread Starter
Forum
Replies
Last Post
Chevrolet
Jeep Mailing List
0
07-26-2006 08:31 AM
Jeep Mailing List
9
01-16-2004 03:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)