1990 jeep yj
07-06-2006, 01:35 AM
#1
Guest
Posts: n/a
1990 jeep yj
I have a 1990 jeep yj with a 5 speed transmisson. After you drive it
for a period of time, when you stop, you can't get it to go into 1st
gear. No grinding, it just won't move. If you let it roll a little,
it will go into gear. Once you are moving, there is no problem
shifting gears. Anyone have any idea what the problem is?
Transmission shops around here have never heard of this problem.
for a period of time, when you stop, you can't get it to go into 1st
gear. No grinding, it just won't move. If you let it roll a little,
it will go into gear. Once you are moving, there is no problem
shifting gears. Anyone have any idea what the problem is?
Transmission shops around here have never heard of this problem.
07-06-2006, 10:27 AM
#2
Guest
Posts: n/a
Re: 1990 jeep yj
My 95 YJ was like this too. I had the transmission rebuilt but before
you do that you could try changing the lubricant. I am now using
Penzoil Synchromesh from Autozone and it makes a big difference with
the shifting (even with the rebuild). I've also read on newsgroups
that Redline MT-90 is very good in these YJ transmissions.
chuck wrote:
> I have a 1990 jeep yj with a 5 speed transmisson. After you drive it
> for a period of time, when you stop, you can't get it to go into 1st
> gear. No grinding, it just won't move. If you let it roll a little,
> it will go into gear. Once you are moving, there is no problem
> shifting gears. Anyone have any idea what the problem is?
> Transmission shops around here have never heard of this problem.
you do that you could try changing the lubricant. I am now using
Penzoil Synchromesh from Autozone and it makes a big difference with
the shifting (even with the rebuild). I've also read on newsgroups
that Redline MT-90 is very good in these YJ transmissions.
chuck wrote:
> I have a 1990 jeep yj with a 5 speed transmisson. After you drive it
> for a period of time, when you stop, you can't get it to go into 1st
> gear. No grinding, it just won't move. If you let it roll a little,
> it will go into gear. Once you are moving, there is no problem
> shifting gears. Anyone have any idea what the problem is?
> Transmission shops around here have never heard of this problem.
07-06-2006, 10:27 AM
#3
Guest
Posts: n/a
Re: 1990 jeep yj
My 95 YJ was like this too. I had the transmission rebuilt but before
you do that you could try changing the lubricant. I am now using
Penzoil Synchromesh from Autozone and it makes a big difference with
the shifting (even with the rebuild). I've also read on newsgroups
that Redline MT-90 is very good in these YJ transmissions.
chuck wrote:
> I have a 1990 jeep yj with a 5 speed transmisson. After you drive it
> for a period of time, when you stop, you can't get it to go into 1st
> gear. No grinding, it just won't move. If you let it roll a little,
> it will go into gear. Once you are moving, there is no problem
> shifting gears. Anyone have any idea what the problem is?
> Transmission shops around here have never heard of this problem.
you do that you could try changing the lubricant. I am now using
Penzoil Synchromesh from Autozone and it makes a big difference with
the shifting (even with the rebuild). I've also read on newsgroups
that Redline MT-90 is very good in these YJ transmissions.
chuck wrote:
> I have a 1990 jeep yj with a 5 speed transmisson. After you drive it
> for a period of time, when you stop, you can't get it to go into 1st
> gear. No grinding, it just won't move. If you let it roll a little,
> it will go into gear. Once you are moving, there is no problem
> shifting gears. Anyone have any idea what the problem is?
> Transmission shops around here have never heard of this problem.
07-06-2006, 10:27 AM
#4
Guest
Posts: n/a
Re: 1990 jeep yj
My 95 YJ was like this too. I had the transmission rebuilt but before
you do that you could try changing the lubricant. I am now using
Penzoil Synchromesh from Autozone and it makes a big difference with
the shifting (even with the rebuild). I've also read on newsgroups
that Redline MT-90 is very good in these YJ transmissions.
chuck wrote:
> I have a 1990 jeep yj with a 5 speed transmisson. After you drive it
> for a period of time, when you stop, you can't get it to go into 1st
> gear. No grinding, it just won't move. If you let it roll a little,
> it will go into gear. Once you are moving, there is no problem
> shifting gears. Anyone have any idea what the problem is?
> Transmission shops around here have never heard of this problem.
you do that you could try changing the lubricant. I am now using
Penzoil Synchromesh from Autozone and it makes a big difference with
the shifting (even with the rebuild). I've also read on newsgroups
that Redline MT-90 is very good in these YJ transmissions.
chuck wrote:
> I have a 1990 jeep yj with a 5 speed transmisson. After you drive it
> for a period of time, when you stop, you can't get it to go into 1st
> gear. No grinding, it just won't move. If you let it roll a little,
> it will go into gear. Once you are moving, there is no problem
> shifting gears. Anyone have any idea what the problem is?
> Transmission shops around here have never heard of this problem.
07-06-2006, 11:02 AM
#5
Guest
Posts: n/a
Re: 1990 jeep yj
Chuck,
It sounds like your slave cylinder is going bad or you've got
excessive air bubbles in your line. Just like your brakes, if you've
got air bubbles in your line from your master cylinder to your slave
cylinder they're going to build up even more as the line gets warmer
and warmer as you drive. My advice is to start with a simple bleeding
of the clutch and a long test drive. If that doesn't work, you
probably have a slave or master cylinder going bad.
When it won't shift into first at a traffic light, or whatever, does
it help to try and get it in gear while you've got the engine revved
up?
It sounds like your slave cylinder is going bad or you've got
excessive air bubbles in your line. Just like your brakes, if you've
got air bubbles in your line from your master cylinder to your slave
cylinder they're going to build up even more as the line gets warmer
and warmer as you drive. My advice is to start with a simple bleeding
of the clutch and a long test drive. If that doesn't work, you
probably have a slave or master cylinder going bad.
When it won't shift into first at a traffic light, or whatever, does
it help to try and get it in gear while you've got the engine revved
up?
07-06-2006, 11:02 AM
#6
Guest
Posts: n/a
Re: 1990 jeep yj
Chuck,
It sounds like your slave cylinder is going bad or you've got
excessive air bubbles in your line. Just like your brakes, if you've
got air bubbles in your line from your master cylinder to your slave
cylinder they're going to build up even more as the line gets warmer
and warmer as you drive. My advice is to start with a simple bleeding
of the clutch and a long test drive. If that doesn't work, you
probably have a slave or master cylinder going bad.
When it won't shift into first at a traffic light, or whatever, does
it help to try and get it in gear while you've got the engine revved
up?
It sounds like your slave cylinder is going bad or you've got
excessive air bubbles in your line. Just like your brakes, if you've
got air bubbles in your line from your master cylinder to your slave
cylinder they're going to build up even more as the line gets warmer
and warmer as you drive. My advice is to start with a simple bleeding
of the clutch and a long test drive. If that doesn't work, you
probably have a slave or master cylinder going bad.
When it won't shift into first at a traffic light, or whatever, does
it help to try and get it in gear while you've got the engine revved
up?
07-06-2006, 11:02 AM
#7
Guest
Posts: n/a
Re: 1990 jeep yj
Chuck,
It sounds like your slave cylinder is going bad or you've got
excessive air bubbles in your line. Just like your brakes, if you've
got air bubbles in your line from your master cylinder to your slave
cylinder they're going to build up even more as the line gets warmer
and warmer as you drive. My advice is to start with a simple bleeding
of the clutch and a long test drive. If that doesn't work, you
probably have a slave or master cylinder going bad.
When it won't shift into first at a traffic light, or whatever, does
it help to try and get it in gear while you've got the engine revved
up?
It sounds like your slave cylinder is going bad or you've got
excessive air bubbles in your line. Just like your brakes, if you've
got air bubbles in your line from your master cylinder to your slave
cylinder they're going to build up even more as the line gets warmer
and warmer as you drive. My advice is to start with a simple bleeding
of the clutch and a long test drive. If that doesn't work, you
probably have a slave or master cylinder going bad.
When it won't shift into first at a traffic light, or whatever, does
it help to try and get it in gear while you've got the engine revved
up?
07-06-2006, 11:41 AM
#8
Guest
Posts: n/a
Re: 1990 jeep yj
When I had a bad slave in my YJ, I found pumping the clutch worked.
"Aaron" <aaron.bright@us.army.mil> wrote in message
news:1152198174.769097.46380@p79g2000cwp.googlegro ups.com...
> Chuck,
> It sounds like your slave cylinder is going bad or you've got
> excessive air bubbles in your line. Just like your brakes, if you've
> got air bubbles in your line from your master cylinder to your slave
> cylinder they're going to build up even more as the line gets warmer
> and warmer as you drive. My advice is to start with a simple bleeding
> of the clutch and a long test drive. If that doesn't work, you
> probably have a slave or master cylinder going bad.
> When it won't shift into first at a traffic light, or whatever, does
> it help to try and get it in gear while you've got the engine revved
> up?
>
"Aaron" <aaron.bright@us.army.mil> wrote in message
news:1152198174.769097.46380@p79g2000cwp.googlegro ups.com...
> Chuck,
> It sounds like your slave cylinder is going bad or you've got
> excessive air bubbles in your line. Just like your brakes, if you've
> got air bubbles in your line from your master cylinder to your slave
> cylinder they're going to build up even more as the line gets warmer
> and warmer as you drive. My advice is to start with a simple bleeding
> of the clutch and a long test drive. If that doesn't work, you
> probably have a slave or master cylinder going bad.
> When it won't shift into first at a traffic light, or whatever, does
> it help to try and get it in gear while you've got the engine revved
> up?
>
07-06-2006, 11:41 AM
#9
Guest
Posts: n/a
Re: 1990 jeep yj
When I had a bad slave in my YJ, I found pumping the clutch worked.
"Aaron" <aaron.bright@us.army.mil> wrote in message
news:1152198174.769097.46380@p79g2000cwp.googlegro ups.com...
> Chuck,
> It sounds like your slave cylinder is going bad or you've got
> excessive air bubbles in your line. Just like your brakes, if you've
> got air bubbles in your line from your master cylinder to your slave
> cylinder they're going to build up even more as the line gets warmer
> and warmer as you drive. My advice is to start with a simple bleeding
> of the clutch and a long test drive. If that doesn't work, you
> probably have a slave or master cylinder going bad.
> When it won't shift into first at a traffic light, or whatever, does
> it help to try and get it in gear while you've got the engine revved
> up?
>
"Aaron" <aaron.bright@us.army.mil> wrote in message
news:1152198174.769097.46380@p79g2000cwp.googlegro ups.com...
> Chuck,
> It sounds like your slave cylinder is going bad or you've got
> excessive air bubbles in your line. Just like your brakes, if you've
> got air bubbles in your line from your master cylinder to your slave
> cylinder they're going to build up even more as the line gets warmer
> and warmer as you drive. My advice is to start with a simple bleeding
> of the clutch and a long test drive. If that doesn't work, you
> probably have a slave or master cylinder going bad.
> When it won't shift into first at a traffic light, or whatever, does
> it help to try and get it in gear while you've got the engine revved
> up?
>
07-06-2006, 11:41 AM
#10
Guest
Posts: n/a
Re: 1990 jeep yj
When I had a bad slave in my YJ, I found pumping the clutch worked.
"Aaron" <aaron.bright@us.army.mil> wrote in message
news:1152198174.769097.46380@p79g2000cwp.googlegro ups.com...
> Chuck,
> It sounds like your slave cylinder is going bad or you've got
> excessive air bubbles in your line. Just like your brakes, if you've
> got air bubbles in your line from your master cylinder to your slave
> cylinder they're going to build up even more as the line gets warmer
> and warmer as you drive. My advice is to start with a simple bleeding
> of the clutch and a long test drive. If that doesn't work, you
> probably have a slave or master cylinder going bad.
> When it won't shift into first at a traffic light, or whatever, does
> it help to try and get it in gear while you've got the engine revved
> up?
>
"Aaron" <aaron.bright@us.army.mil> wrote in message
news:1152198174.769097.46380@p79g2000cwp.googlegro ups.com...
> Chuck,
> It sounds like your slave cylinder is going bad or you've got
> excessive air bubbles in your line. Just like your brakes, if you've
> got air bubbles in your line from your master cylinder to your slave
> cylinder they're going to build up even more as the line gets warmer
> and warmer as you drive. My advice is to start with a simple bleeding
> of the clutch and a long test drive. If that doesn't work, you
> probably have a slave or master cylinder going bad.
> When it won't shift into first at a traffic light, or whatever, does
> it help to try and get it in gear while you've got the engine revved
> up?
>
