Thanks for the follow up.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Mark12211 wrote:
>
> for any one following the thread.... I had to drop the Jeep off at the shop to
> be looked at. It ends up it's a bad carb, leaking inside.
>
> Thanks for everyone's help.
> -Mark

 

At least a carb kit is only $20.00 or so for that carb. The kit comes
with a new float needle and seat to stop the leaking.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Mark12211 wrote:
>
> for any one following the thread.... I had to drop the Jeep off at the shop to
> be looked at. It ends up it's a bad carb, leaking inside.
>
> Thanks for everyone's help.
> -Mark
>
> >Subject: 1989 Wrangler stalls when brakes are used.
> >From: mark12211@aol.com (Mark12211)
> >Date: 8/4/2004 5:31 PM Eastern Standard Time
> >Message-id: <20040804173121.16411.00000899@mb-m14.aol.com>
> >
> >
> >When I use the brakes on my 1989 Wrangler 4.2L 5-speed the engine stalls. It
> >doesn't happen during idle and the brakes are used, just when coming to a
> >stop
> >while driving. When I am driving and I put the clutch in, the engine idles
> >fine. It's only when the brakes are used. At idle, if I twist the steering
> >wheel side to side, it loses a few RPM, but nothing like how the engine just
> >dies when the brakes are used. I've tried moving the idle up to 20,000 RPM,
> >but it doesn't help, the brakes just pull the RPMs down low enough to stall
> >the
> >engine. The carb is running a little rich but not bad. Brake fluid looks
> >good. The engine has over 165,000 miles on it. Oil pressure is up towards
> >80
> >during idle and driving, but sinks quick when brakes are applied while
> >driving.

 

At least a carb kit is only $20.00 or so for that carb. The kit comes
with a new float needle and seat to stop the leaking.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Mark12211 wrote:
>
> for any one following the thread.... I had to drop the Jeep off at the shop to
> be looked at. It ends up it's a bad carb, leaking inside.
>
> Thanks for everyone's help.
> -Mark
>
> >Subject: 1989 Wrangler stalls when brakes are used.
> >From: mark12211@aol.com (Mark12211)
> >Date: 8/4/2004 5:31 PM Eastern Standard Time
> >Message-id: <20040804173121.16411.00000899@mb-m14.aol.com>
> >
> >
> >When I use the brakes on my 1989 Wrangler 4.2L 5-speed the engine stalls. It
> >doesn't happen during idle and the brakes are used, just when coming to a
> >stop
> >while driving. When I am driving and I put the clutch in, the engine idles
> >fine. It's only when the brakes are used. At idle, if I twist the steering
> >wheel side to side, it loses a few RPM, but nothing like how the engine just
> >dies when the brakes are used. I've tried moving the idle up to 20,000 RPM,
> >but it doesn't help, the brakes just pull the RPMs down low enough to stall
> >the
> >engine. The carb is running a little rich but not bad. Brake fluid looks
> >good. The engine has over 165,000 miles on it. Oil pressure is up towards
> >80
> >during idle and driving, but sinks quick when brakes are applied while
> >driving.

 

At least a carb kit is only $20.00 or so for that carb. The kit comes
with a new float needle and seat to stop the leaking.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Mark12211 wrote:
>
> for any one following the thread.... I had to drop the Jeep off at the shop to
> be looked at. It ends up it's a bad carb, leaking inside.
>
> Thanks for everyone's help.
> -Mark
>
> >Subject: 1989 Wrangler stalls when brakes are used.
> >From: mark12211@aol.com (Mark12211)
> >Date: 8/4/2004 5:31 PM Eastern Standard Time
> >Message-id: <20040804173121.16411.00000899@mb-m14.aol.com>
> >
> >
> >When I use the brakes on my 1989 Wrangler 4.2L 5-speed the engine stalls. It
> >doesn't happen during idle and the brakes are used, just when coming to a
> >stop
> >while driving. When I am driving and I put the clutch in, the engine idles
> >fine. It's only when the brakes are used. At idle, if I twist the steering
> >wheel side to side, it loses a few RPM, but nothing like how the engine just
> >dies when the brakes are used. I've tried moving the idle up to 20,000 RPM,
> >but it doesn't help, the brakes just pull the RPMs down low enough to stall
> >the
> >engine. The carb is running a little rich but not bad. Brake fluid looks
> >good. The engine has over 165,000 miles on it. Oil pressure is up towards
> >80
> >during idle and driving, but sinks quick when brakes are applied while
> >driving.

 

At least a carb kit is only $20.00 or so for that carb. The kit comes
with a new float needle and seat to stop the leaking.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Mark12211 wrote:
>
> for any one following the thread.... I had to drop the Jeep off at the shop to
> be looked at. It ends up it's a bad carb, leaking inside.
>
> Thanks for everyone's help.
> -Mark
>
> >Subject: 1989 Wrangler stalls when brakes are used.
> >From: mark12211@aol.com (Mark12211)
> >Date: 8/4/2004 5:31 PM Eastern Standard Time
> >Message-id: <20040804173121.16411.00000899@mb-m14.aol.com>
> >
> >
> >When I use the brakes on my 1989 Wrangler 4.2L 5-speed the engine stalls. It
> >doesn't happen during idle and the brakes are used, just when coming to a
> >stop
> >while driving. When I am driving and I put the clutch in, the engine idles
> >fine. It's only when the brakes are used. At idle, if I twist the steering
> >wheel side to side, it loses a few RPM, but nothing like how the engine just
> >dies when the brakes are used. I've tried moving the idle up to 20,000 RPM,
> >but it doesn't help, the brakes just pull the RPMs down low enough to stall
> >the
> >engine. The carb is running a little rich but not bad. Brake fluid looks
> >good. The engine has over 165,000 miles on it. Oil pressure is up towards
> >80
> >during idle and driving, but sinks quick when brakes are applied while
> >driving.