1989 Jeep Cherokee Larado 4.0 Motor
Guest
Posts: n/a
1989 Jeep Cherokee Larado 4.0 Motor
I have an 89 Jeep cherokee that i have lost all lights to no
headlights, tail lights, brake lights, turn signal, nothing. replaced
ignition switch but still no luck. also looking for a free wiring
diagram i can download on here to look at please. can anyone help.
headlights, tail lights, brake lights, turn signal, nothing. replaced
ignition switch but still no luck. also looking for a free wiring
diagram i can download on here to look at please. can anyone help.
Guest
Posts: n/a
Re: 1989 Jeep Cherokee Larado 4.0 Motor
Sounds like a toasted fusable link. Find the starter solenoid on the
firewall, you should see the large cable running down to the starter
plus several smaller wires that are crimped into regular wires about 10"
from the solenoid. Likely that one of those is burnt. Replacement is
easy, finding the cause of the problem is tougher.
doughboy39 wrote:
> I have an 89 Jeep cherokee that i have lost all lights to no
> headlights, tail lights, brake lights, turn signal, nothing. replaced
> ignition switch but still no luck. also looking for a free wiring
> diagram i can download on here to look at please. can anyone help.
>
firewall, you should see the large cable running down to the starter
plus several smaller wires that are crimped into regular wires about 10"
from the solenoid. Likely that one of those is burnt. Replacement is
easy, finding the cause of the problem is tougher.
doughboy39 wrote:
> I have an 89 Jeep cherokee that i have lost all lights to no
> headlights, tail lights, brake lights, turn signal, nothing. replaced
> ignition switch but still no luck. also looking for a free wiring
> diagram i can download on here to look at please. can anyone help.
>
Guest
Posts: n/a
Re: 1989 Jeep Cherokee Larado 4.0 Motor
Sounds like a toasted fusable link. Find the starter solenoid on the
firewall, you should see the large cable running down to the starter
plus several smaller wires that are crimped into regular wires about 10"
from the solenoid. Likely that one of those is burnt. Replacement is
easy, finding the cause of the problem is tougher.
doughboy39 wrote:
> I have an 89 Jeep cherokee that i have lost all lights to no
> headlights, tail lights, brake lights, turn signal, nothing. replaced
> ignition switch but still no luck. also looking for a free wiring
> diagram i can download on here to look at please. can anyone help.
>
firewall, you should see the large cable running down to the starter
plus several smaller wires that are crimped into regular wires about 10"
from the solenoid. Likely that one of those is burnt. Replacement is
easy, finding the cause of the problem is tougher.
doughboy39 wrote:
> I have an 89 Jeep cherokee that i have lost all lights to no
> headlights, tail lights, brake lights, turn signal, nothing. replaced
> ignition switch but still no luck. also looking for a free wiring
> diagram i can download on here to look at please. can anyone help.
>
Guest
Posts: n/a
Re: 1989 Jeep Cherokee Larado 4.0 Motor
Sounds like a toasted fusable link. Find the starter solenoid on the
firewall, you should see the large cable running down to the starter
plus several smaller wires that are crimped into regular wires about 10"
from the solenoid. Likely that one of those is burnt. Replacement is
easy, finding the cause of the problem is tougher.
doughboy39 wrote:
> I have an 89 Jeep cherokee that i have lost all lights to no
> headlights, tail lights, brake lights, turn signal, nothing. replaced
> ignition switch but still no luck. also looking for a free wiring
> diagram i can download on here to look at please. can anyone help.
>
firewall, you should see the large cable running down to the starter
plus several smaller wires that are crimped into regular wires about 10"
from the solenoid. Likely that one of those is burnt. Replacement is
easy, finding the cause of the problem is tougher.
doughboy39 wrote:
> I have an 89 Jeep cherokee that i have lost all lights to no
> headlights, tail lights, brake lights, turn signal, nothing. replaced
> ignition switch but still no luck. also looking for a free wiring
> diagram i can download on here to look at please. can anyone help.
>
Thread
Thread Starter
Forum
Replies
Last Post
quincy451@yahoo.com
Jeep Mailing List
3
May 25, 2006 02:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
