1988 Jeep Comanche Pioneer
09-07-2007, 02:48 AM
#11
Guest
Posts: n/a
Re: 1988 Jeep Comanche Pioneer
Commanche is a great vehicle. It's the same unibody 'frame', engine,
transmission, t-case and axles as the Cherokee. Super reliable pickup.
Carl
"cowboy67" <cowboy67111@yahoo.com> wrote in message
news:1189077414.751197.173810@r29g2000hsg.googlegr oups.com...
> Great thanks for the input! I read a little on the net and seen
> nothing but great reviews.
>
> On Sep 5, 10:38 pm, Jeff DeWitt <JeffDeW...@nc.rr.com> wrote:
>> I had an 86, GREAT little truck, I'd probably still be driving it if it
>> hadn't been totaled by an old man in a minivan.
>>
>> It's really an XJ (Cherokee) pickup, from about the back of the seat
>> forward it's pretty much identical to a Cherokee, so mechanical parts
>> aren't hard to find at all, and if it's got the 4.0 engine you've got a
>> pretty much bulletproof engine.
>>
>> They are about as easy to work on as you could hope for a relatively
>> modern vehicle... about the only think I know of that you have to pull
>> the engine for is replacing the engine.
>>
>> The only thing your really going to have a tough time finding are parts
>> that are unique to the truck, such as the rear bumper, tailgate, bed
>> parts... but if I can find parts for my Studebaker pickup it should be
>> relatively easy to find parts for your Comanche.
>>
>> Good luck, and have fun with it!
>>
>> Jeff DeWitt
>>
>>
>>
>> cowboy67 wrote:
>> > Howdy all,
>>
>> > Just a few questions about the 88JeepComanche.
>>
>> > 1) Overall, how would you rate it?
>> > 2) Parts, are they hard to find?
>> > 3)Maintenance, does it cost an arm and leg and is it easy to work on?
>> > Basically, if anything needs to be done, can you do it with the engine
>> > installed in the vehicle?
>>
>> > I am sure I will have a few more as I think more about it.
>>
>> > Thanks,
>>
>> > Jim- Hide quoted text -
>>
>> - Show quoted text -
>
>
transmission, t-case and axles as the Cherokee. Super reliable pickup.
Carl
"cowboy67" <cowboy67111@yahoo.com> wrote in message
news:1189077414.751197.173810@r29g2000hsg.googlegr oups.com...
> Great thanks for the input! I read a little on the net and seen
> nothing but great reviews.
>
> On Sep 5, 10:38 pm, Jeff DeWitt <JeffDeW...@nc.rr.com> wrote:
>> I had an 86, GREAT little truck, I'd probably still be driving it if it
>> hadn't been totaled by an old man in a minivan.
>>
>> It's really an XJ (Cherokee) pickup, from about the back of the seat
>> forward it's pretty much identical to a Cherokee, so mechanical parts
>> aren't hard to find at all, and if it's got the 4.0 engine you've got a
>> pretty much bulletproof engine.
>>
>> They are about as easy to work on as you could hope for a relatively
>> modern vehicle... about the only think I know of that you have to pull
>> the engine for is replacing the engine.
>>
>> The only thing your really going to have a tough time finding are parts
>> that are unique to the truck, such as the rear bumper, tailgate, bed
>> parts... but if I can find parts for my Studebaker pickup it should be
>> relatively easy to find parts for your Comanche.
>>
>> Good luck, and have fun with it!
>>
>> Jeff DeWitt
>>
>>
>>
>> cowboy67 wrote:
>> > Howdy all,
>>
>> > Just a few questions about the 88JeepComanche.
>>
>> > 1) Overall, how would you rate it?
>> > 2) Parts, are they hard to find?
>> > 3)Maintenance, does it cost an arm and leg and is it easy to work on?
>> > Basically, if anything needs to be done, can you do it with the engine
>> > installed in the vehicle?
>>
>> > I am sure I will have a few more as I think more about it.
>>
>> > Thanks,
>>
>> > Jim- Hide quoted text -
>>
>> - Show quoted text -
>
>
09-07-2007, 02:48 AM
#12
Guest
Posts: n/a
Re: 1988 Jeep Comanche Pioneer
Commanche is a great vehicle. It's the same unibody 'frame', engine,
transmission, t-case and axles as the Cherokee. Super reliable pickup.
Carl
"cowboy67" <cowboy67111@yahoo.com> wrote in message
news:1189077414.751197.173810@r29g2000hsg.googlegr oups.com...
> Great thanks for the input! I read a little on the net and seen
> nothing but great reviews.
>
> On Sep 5, 10:38 pm, Jeff DeWitt <JeffDeW...@nc.rr.com> wrote:
>> I had an 86, GREAT little truck, I'd probably still be driving it if it
>> hadn't been totaled by an old man in a minivan.
>>
>> It's really an XJ (Cherokee) pickup, from about the back of the seat
>> forward it's pretty much identical to a Cherokee, so mechanical parts
>> aren't hard to find at all, and if it's got the 4.0 engine you've got a
>> pretty much bulletproof engine.
>>
>> They are about as easy to work on as you could hope for a relatively
>> modern vehicle... about the only think I know of that you have to pull
>> the engine for is replacing the engine.
>>
>> The only thing your really going to have a tough time finding are parts
>> that are unique to the truck, such as the rear bumper, tailgate, bed
>> parts... but if I can find parts for my Studebaker pickup it should be
>> relatively easy to find parts for your Comanche.
>>
>> Good luck, and have fun with it!
>>
>> Jeff DeWitt
>>
>>
>>
>> cowboy67 wrote:
>> > Howdy all,
>>
>> > Just a few questions about the 88JeepComanche.
>>
>> > 1) Overall, how would you rate it?
>> > 2) Parts, are they hard to find?
>> > 3)Maintenance, does it cost an arm and leg and is it easy to work on?
>> > Basically, if anything needs to be done, can you do it with the engine
>> > installed in the vehicle?
>>
>> > I am sure I will have a few more as I think more about it.
>>
>> > Thanks,
>>
>> > Jim- Hide quoted text -
>>
>> - Show quoted text -
>
>
transmission, t-case and axles as the Cherokee. Super reliable pickup.
Carl
"cowboy67" <cowboy67111@yahoo.com> wrote in message
news:1189077414.751197.173810@r29g2000hsg.googlegr oups.com...
> Great thanks for the input! I read a little on the net and seen
> nothing but great reviews.
>
> On Sep 5, 10:38 pm, Jeff DeWitt <JeffDeW...@nc.rr.com> wrote:
>> I had an 86, GREAT little truck, I'd probably still be driving it if it
>> hadn't been totaled by an old man in a minivan.
>>
>> It's really an XJ (Cherokee) pickup, from about the back of the seat
>> forward it's pretty much identical to a Cherokee, so mechanical parts
>> aren't hard to find at all, and if it's got the 4.0 engine you've got a
>> pretty much bulletproof engine.
>>
>> They are about as easy to work on as you could hope for a relatively
>> modern vehicle... about the only think I know of that you have to pull
>> the engine for is replacing the engine.
>>
>> The only thing your really going to have a tough time finding are parts
>> that are unique to the truck, such as the rear bumper, tailgate, bed
>> parts... but if I can find parts for my Studebaker pickup it should be
>> relatively easy to find parts for your Comanche.
>>
>> Good luck, and have fun with it!
>>
>> Jeff DeWitt
>>
>>
>>
>> cowboy67 wrote:
>> > Howdy all,
>>
>> > Just a few questions about the 88JeepComanche.
>>
>> > 1) Overall, how would you rate it?
>> > 2) Parts, are they hard to find?
>> > 3)Maintenance, does it cost an arm and leg and is it easy to work on?
>> > Basically, if anything needs to be done, can you do it with the engine
>> > installed in the vehicle?
>>
>> > I am sure I will have a few more as I think more about it.
>>
>> > Thanks,
>>
>> > Jim- Hide quoted text -
>>
>> - Show quoted text -
>
>
09-07-2007, 02:48 AM
#13
Guest
Posts: n/a
Re: 1988 Jeep Comanche Pioneer
Commanche is a great vehicle. It's the same unibody 'frame', engine,
transmission, t-case and axles as the Cherokee. Super reliable pickup.
Carl
"cowboy67" <cowboy67111@yahoo.com> wrote in message
news:1189077414.751197.173810@r29g2000hsg.googlegr oups.com...
> Great thanks for the input! I read a little on the net and seen
> nothing but great reviews.
>
> On Sep 5, 10:38 pm, Jeff DeWitt <JeffDeW...@nc.rr.com> wrote:
>> I had an 86, GREAT little truck, I'd probably still be driving it if it
>> hadn't been totaled by an old man in a minivan.
>>
>> It's really an XJ (Cherokee) pickup, from about the back of the seat
>> forward it's pretty much identical to a Cherokee, so mechanical parts
>> aren't hard to find at all, and if it's got the 4.0 engine you've got a
>> pretty much bulletproof engine.
>>
>> They are about as easy to work on as you could hope for a relatively
>> modern vehicle... about the only think I know of that you have to pull
>> the engine for is replacing the engine.
>>
>> The only thing your really going to have a tough time finding are parts
>> that are unique to the truck, such as the rear bumper, tailgate, bed
>> parts... but if I can find parts for my Studebaker pickup it should be
>> relatively easy to find parts for your Comanche.
>>
>> Good luck, and have fun with it!
>>
>> Jeff DeWitt
>>
>>
>>
>> cowboy67 wrote:
>> > Howdy all,
>>
>> > Just a few questions about the 88JeepComanche.
>>
>> > 1) Overall, how would you rate it?
>> > 2) Parts, are they hard to find?
>> > 3)Maintenance, does it cost an arm and leg and is it easy to work on?
>> > Basically, if anything needs to be done, can you do it with the engine
>> > installed in the vehicle?
>>
>> > I am sure I will have a few more as I think more about it.
>>
>> > Thanks,
>>
>> > Jim- Hide quoted text -
>>
>> - Show quoted text -
>
>
transmission, t-case and axles as the Cherokee. Super reliable pickup.
Carl
"cowboy67" <cowboy67111@yahoo.com> wrote in message
news:1189077414.751197.173810@r29g2000hsg.googlegr oups.com...
> Great thanks for the input! I read a little on the net and seen
> nothing but great reviews.
>
> On Sep 5, 10:38 pm, Jeff DeWitt <JeffDeW...@nc.rr.com> wrote:
>> I had an 86, GREAT little truck, I'd probably still be driving it if it
>> hadn't been totaled by an old man in a minivan.
>>
>> It's really an XJ (Cherokee) pickup, from about the back of the seat
>> forward it's pretty much identical to a Cherokee, so mechanical parts
>> aren't hard to find at all, and if it's got the 4.0 engine you've got a
>> pretty much bulletproof engine.
>>
>> They are about as easy to work on as you could hope for a relatively
>> modern vehicle... about the only think I know of that you have to pull
>> the engine for is replacing the engine.
>>
>> The only thing your really going to have a tough time finding are parts
>> that are unique to the truck, such as the rear bumper, tailgate, bed
>> parts... but if I can find parts for my Studebaker pickup it should be
>> relatively easy to find parts for your Comanche.
>>
>> Good luck, and have fun with it!
>>
>> Jeff DeWitt
>>
>>
>>
>> cowboy67 wrote:
>> > Howdy all,
>>
>> > Just a few questions about the 88JeepComanche.
>>
>> > 1) Overall, how would you rate it?
>> > 2) Parts, are they hard to find?
>> > 3)Maintenance, does it cost an arm and leg and is it easy to work on?
>> > Basically, if anything needs to be done, can you do it with the engine
>> > installed in the vehicle?
>>
>> > I am sure I will have a few more as I think more about it.
>>
>> > Thanks,
>>
>> > Jim- Hide quoted text -
>>
>> - Show quoted text -
>
>
09-13-2007, 09:14 PM
#14
Guest
Posts: n/a
Re: 1988 Jeep Comanche Pioneer
On Sep 5, 10:09 pm, cowboy67 <cowboy67...@yahoo.com> wrote:
> Howdy all,
>
> Just a few questions about the 88 Jeep Comanche.
>
> 1) Overall, how would you rate it?
> 2) Parts, are they hard to find?
> 3)Maintenance, does it cost an arm and leg and is it easy to work on?
> Basically, if anything needs to be done, can you do it with the engine
> installed in the vehicle?
>
> I am sure I will have a few more as I think more about it.
>
> Thanks,
>
> Jim
Thanks for the input. I bought it the other day and so far love it! Is
there any website that you all have that specializes in Jeep Comanche
parts? I have looked but really could not find one that was that
specific. The part I am looking for is the interior courtesy lights.
Thanks again! Jim
> Howdy all,
>
> Just a few questions about the 88 Jeep Comanche.
>
> 1) Overall, how would you rate it?
> 2) Parts, are they hard to find?
> 3)Maintenance, does it cost an arm and leg and is it easy to work on?
> Basically, if anything needs to be done, can you do it with the engine
> installed in the vehicle?
>
> I am sure I will have a few more as I think more about it.
>
> Thanks,
>
> Jim
Thanks for the input. I bought it the other day and so far love it! Is
there any website that you all have that specializes in Jeep Comanche
parts? I have looked but really could not find one that was that
specific. The part I am looking for is the interior courtesy lights.
Thanks again! Jim
09-13-2007, 09:14 PM
#15
Guest
Posts: n/a
Re: 1988 Jeep Comanche Pioneer
On Sep 5, 10:09 pm, cowboy67 <cowboy67...@yahoo.com> wrote:
> Howdy all,
>
> Just a few questions about the 88 Jeep Comanche.
>
> 1) Overall, how would you rate it?
> 2) Parts, are they hard to find?
> 3)Maintenance, does it cost an arm and leg and is it easy to work on?
> Basically, if anything needs to be done, can you do it with the engine
> installed in the vehicle?
>
> I am sure I will have a few more as I think more about it.
>
> Thanks,
>
> Jim
Thanks for the input. I bought it the other day and so far love it! Is
there any website that you all have that specializes in Jeep Comanche
parts? I have looked but really could not find one that was that
specific. The part I am looking for is the interior courtesy lights.
Thanks again! Jim
> Howdy all,
>
> Just a few questions about the 88 Jeep Comanche.
>
> 1) Overall, how would you rate it?
> 2) Parts, are they hard to find?
> 3)Maintenance, does it cost an arm and leg and is it easy to work on?
> Basically, if anything needs to be done, can you do it with the engine
> installed in the vehicle?
>
> I am sure I will have a few more as I think more about it.
>
> Thanks,
>
> Jim
Thanks for the input. I bought it the other day and so far love it! Is
there any website that you all have that specializes in Jeep Comanche
parts? I have looked but really could not find one that was that
specific. The part I am looking for is the interior courtesy lights.
Thanks again! Jim
09-13-2007, 09:14 PM
#16
Guest
Posts: n/a
Re: 1988 Jeep Comanche Pioneer
On Sep 5, 10:09 pm, cowboy67 <cowboy67...@yahoo.com> wrote:
> Howdy all,
>
> Just a few questions about the 88 Jeep Comanche.
>
> 1) Overall, how would you rate it?
> 2) Parts, are they hard to find?
> 3)Maintenance, does it cost an arm and leg and is it easy to work on?
> Basically, if anything needs to be done, can you do it with the engine
> installed in the vehicle?
>
> I am sure I will have a few more as I think more about it.
>
> Thanks,
>
> Jim
Thanks for the input. I bought it the other day and so far love it! Is
there any website that you all have that specializes in Jeep Comanche
parts? I have looked but really could not find one that was that
specific. The part I am looking for is the interior courtesy lights.
Thanks again! Jim
> Howdy all,
>
> Just a few questions about the 88 Jeep Comanche.
>
> 1) Overall, how would you rate it?
> 2) Parts, are they hard to find?
> 3)Maintenance, does it cost an arm and leg and is it easy to work on?
> Basically, if anything needs to be done, can you do it with the engine
> installed in the vehicle?
>
> I am sure I will have a few more as I think more about it.
>
> Thanks,
>
> Jim
Thanks for the input. I bought it the other day and so far love it! Is
there any website that you all have that specializes in Jeep Comanche
parts? I have looked but really could not find one that was that
specific. The part I am looking for is the interior courtesy lights.
Thanks again! Jim
09-13-2007, 09:14 PM
#17
Guest
Posts: n/a
Re: 1988 Jeep Comanche Pioneer
On Sep 5, 10:09 pm, cowboy67 <cowboy67...@yahoo.com> wrote:
> Howdy all,
>
> Just a few questions about the 88 Jeep Comanche.
>
> 1) Overall, how would you rate it?
> 2) Parts, are they hard to find?
> 3)Maintenance, does it cost an arm and leg and is it easy to work on?
> Basically, if anything needs to be done, can you do it with the engine
> installed in the vehicle?
>
> I am sure I will have a few more as I think more about it.
>
> Thanks,
>
> Jim
Thanks for the input. I bought it the other day and so far love it! Is
there any website that you all have that specializes in Jeep Comanche
parts? I have looked but really could not find one that was that
specific. The part I am looking for is the interior courtesy lights.
Thanks again! Jim
> Howdy all,
>
> Just a few questions about the 88 Jeep Comanche.
>
> 1) Overall, how would you rate it?
> 2) Parts, are they hard to find?
> 3)Maintenance, does it cost an arm and leg and is it easy to work on?
> Basically, if anything needs to be done, can you do it with the engine
> installed in the vehicle?
>
> I am sure I will have a few more as I think more about it.
>
> Thanks,
>
> Jim
Thanks for the input. I bought it the other day and so far love it! Is
there any website that you all have that specializes in Jeep Comanche
parts? I have looked but really could not find one that was that
specific. The part I am looking for is the interior courtesy lights.
Thanks again! Jim
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
