1982 CJ-7
Guest
Posts: n/a
Re: 1982 CJ-7-Solved
Hi Norman,
Please send pictures, I bet you'll be able to out do DougW here for
procrastination: http://members.***.net/douglas.wilson/motormount/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Norman wrote:
>
> ------------------------------------
> When I jerked hard, I could slide it about 3 inches each way from the
> center. I'll be buying motor mounts this weekend too. Thanks Bill!
>
> Norman
Please send pictures, I bet you'll be able to out do DougW here for
procrastination: http://members.***.net/douglas.wilson/motormount/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Norman wrote:
>
> ------------------------------------
> When I jerked hard, I could slide it about 3 inches each way from the
> center. I'll be buying motor mounts this weekend too. Thanks Bill!
>
> Norman
Guest
Posts: n/a
Re: 1982 CJ-7-Solved
Hi Norman,
Please send pictures, I bet you'll be able to out do DougW here for
procrastination: http://members.***.net/douglas.wilson/motormount/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Norman wrote:
>
> ------------------------------------
> When I jerked hard, I could slide it about 3 inches each way from the
> center. I'll be buying motor mounts this weekend too. Thanks Bill!
>
> Norman
Please send pictures, I bet you'll be able to out do DougW here for
procrastination: http://members.***.net/douglas.wilson/motormount/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Norman wrote:
>
> ------------------------------------
> When I jerked hard, I could slide it about 3 inches each way from the
> center. I'll be buying motor mounts this weekend too. Thanks Bill!
>
> Norman
Guest
Posts: n/a
Re: 1982 CJ-7-Solved
Hi Norman,
Please send pictures, I bet you'll be able to out do DougW here for
procrastination: http://members.***.net/douglas.wilson/motormount/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Norman wrote:
>
> ------------------------------------
> When I jerked hard, I could slide it about 3 inches each way from the
> center. I'll be buying motor mounts this weekend too. Thanks Bill!
>
> Norman
Please send pictures, I bet you'll be able to out do DougW here for
procrastination: http://members.***.net/douglas.wilson/motormount/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Norman wrote:
>
> ------------------------------------
> When I jerked hard, I could slide it about 3 inches each way from the
> center. I'll be buying motor mounts this weekend too. Thanks Bill!
>
> Norman
Guest
Posts: n/a
Re: 1982 CJ-7-Solved
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42A6EE32.F77EA0A9@sympatico.ca...
> Norman wrote:
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:42A591CC.CFF1D37E@sympatico.ca...
> > > I still am putting my money on a u-joint.... Two more to go up
there...
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > I think you have to. Because all the gears are spinning while
the
> > > > Dana 300 is in neutral, being spun be the transmission, that's how
we
> > > > make sure all is lubricated every hundred miles or so flat towing.
Pull
> > > > the driveshaft, and you should be able to feel it by turning the
pinion
> > > > by hand, then confirm the pieces by removing the cover.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Norman wrote:
> > > > >
> > > > > No noise with the transfer in neutral and the transmission in gear
> > with the
> > > > > engine running.
> > > > >
> > > > > Take the front shaft back out and try again?
> > > > >
> > > > > Thanks Bill,
> > > > > Norman
> > --------------------------------------------------------------
> > The mount that holds the transfer case to the frame is loose. When I
put a
> > wrench on the plug to check the transfer case gear oil level I was able
to
> > move/slide the entire assembly about 3 inches left and right. I'm sure
that
> > the awful noise that I heard was the case banging from side to side.
> >
> > I thank you all for helping me track down the problem and eliminate
other
> > items. My front U joints were in bad shape too.
> >
> > Sincerely,
> > Norman
>
> Thanks for the update. That just happened to our Cherokee too. It
> started making really bad noises when making a right turn. The t-case
> was/is sliding enough to let the exhaust header down pipe hit the
> driveshaft u-joint.
>
> Mike
---------------
You are welcome Mike. I'll post again once I get the new mounts in.
Norman
Guest
Posts: n/a
Re: 1982 CJ-7-Solved
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42A6EE32.F77EA0A9@sympatico.ca...
> Norman wrote:
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:42A591CC.CFF1D37E@sympatico.ca...
> > > I still am putting my money on a u-joint.... Two more to go up
there...
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > I think you have to. Because all the gears are spinning while
the
> > > > Dana 300 is in neutral, being spun be the transmission, that's how
we
> > > > make sure all is lubricated every hundred miles or so flat towing.
Pull
> > > > the driveshaft, and you should be able to feel it by turning the
pinion
> > > > by hand, then confirm the pieces by removing the cover.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Norman wrote:
> > > > >
> > > > > No noise with the transfer in neutral and the transmission in gear
> > with the
> > > > > engine running.
> > > > >
> > > > > Take the front shaft back out and try again?
> > > > >
> > > > > Thanks Bill,
> > > > > Norman
> > --------------------------------------------------------------
> > The mount that holds the transfer case to the frame is loose. When I
put a
> > wrench on the plug to check the transfer case gear oil level I was able
to
> > move/slide the entire assembly about 3 inches left and right. I'm sure
that
> > the awful noise that I heard was the case banging from side to side.
> >
> > I thank you all for helping me track down the problem and eliminate
other
> > items. My front U joints were in bad shape too.
> >
> > Sincerely,
> > Norman
>
> Thanks for the update. That just happened to our Cherokee too. It
> started making really bad noises when making a right turn. The t-case
> was/is sliding enough to let the exhaust header down pipe hit the
> driveshaft u-joint.
>
> Mike
---------------
You are welcome Mike. I'll post again once I get the new mounts in.
Norman
Guest
Posts: n/a
Re: 1982 CJ-7-Solved
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42A6EE32.F77EA0A9@sympatico.ca...
> Norman wrote:
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:42A591CC.CFF1D37E@sympatico.ca...
> > > I still am putting my money on a u-joint.... Two more to go up
there...
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > I think you have to. Because all the gears are spinning while
the
> > > > Dana 300 is in neutral, being spun be the transmission, that's how
we
> > > > make sure all is lubricated every hundred miles or so flat towing.
Pull
> > > > the driveshaft, and you should be able to feel it by turning the
pinion
> > > > by hand, then confirm the pieces by removing the cover.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Norman wrote:
> > > > >
> > > > > No noise with the transfer in neutral and the transmission in gear
> > with the
> > > > > engine running.
> > > > >
> > > > > Take the front shaft back out and try again?
> > > > >
> > > > > Thanks Bill,
> > > > > Norman
> > --------------------------------------------------------------
> > The mount that holds the transfer case to the frame is loose. When I
put a
> > wrench on the plug to check the transfer case gear oil level I was able
to
> > move/slide the entire assembly about 3 inches left and right. I'm sure
that
> > the awful noise that I heard was the case banging from side to side.
> >
> > I thank you all for helping me track down the problem and eliminate
other
> > items. My front U joints were in bad shape too.
> >
> > Sincerely,
> > Norman
>
> Thanks for the update. That just happened to our Cherokee too. It
> started making really bad noises when making a right turn. The t-case
> was/is sliding enough to let the exhaust header down pipe hit the
> driveshaft u-joint.
>
> Mike
---------------
You are welcome Mike. I'll post again once I get the new mounts in.
Norman
Guest
Posts: n/a
Re: 1982 CJ-7-Solved
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42A6EE32.F77EA0A9@sympatico.ca...
> Norman wrote:
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:42A591CC.CFF1D37E@sympatico.ca...
> > > I still am putting my money on a u-joint.... Two more to go up
there...
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > I think you have to. Because all the gears are spinning while
the
> > > > Dana 300 is in neutral, being spun be the transmission, that's how
we
> > > > make sure all is lubricated every hundred miles or so flat towing.
Pull
> > > > the driveshaft, and you should be able to feel it by turning the
pinion
> > > > by hand, then confirm the pieces by removing the cover.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Norman wrote:
> > > > >
> > > > > No noise with the transfer in neutral and the transmission in gear
> > with the
> > > > > engine running.
> > > > >
> > > > > Take the front shaft back out and try again?
> > > > >
> > > > > Thanks Bill,
> > > > > Norman
> > --------------------------------------------------------------
> > The mount that holds the transfer case to the frame is loose. When I
put a
> > wrench on the plug to check the transfer case gear oil level I was able
to
> > move/slide the entire assembly about 3 inches left and right. I'm sure
that
> > the awful noise that I heard was the case banging from side to side.
> >
> > I thank you all for helping me track down the problem and eliminate
other
> > items. My front U joints were in bad shape too.
> >
> > Sincerely,
> > Norman
>
> Thanks for the update. That just happened to our Cherokee too. It
> started making really bad noises when making a right turn. The t-case
> was/is sliding enough to let the exhaust header down pipe hit the
> driveshaft u-joint.
>
> Mike
---------------
You are welcome Mike. I'll post again once I get the new mounts in.
Norman
Guest
Posts: n/a
Re: 1982 CJ-7-Solved
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42A7539F.A66C619A@***.net...
> Hi Norman,
> Please send pictures, I bet you'll be able to out do DougW here for
> procrastination: http://members.***.net/douglas.wilson/motormount/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
>
> Norman wrote:
> >
> > ------------------------------------
> > When I jerked hard, I could slide it about 3 inches each way from the
> > center. I'll be buying motor mounts this weekend too. Thanks Bill!
> >
> > Norman
---------------------------
OK Bill, and thanks for the link.
Norman
Guest
Posts: n/a
Re: 1982 CJ-7-Solved
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42A7539F.A66C619A@***.net...
> Hi Norman,
> Please send pictures, I bet you'll be able to out do DougW here for
> procrastination: http://members.***.net/douglas.wilson/motormount/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
>
> Norman wrote:
> >
> > ------------------------------------
> > When I jerked hard, I could slide it about 3 inches each way from the
> > center. I'll be buying motor mounts this weekend too. Thanks Bill!
> >
> > Norman
---------------------------
OK Bill, and thanks for the link.
Norman
Guest
Posts: n/a
Re: 1982 CJ-7-Solved
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42A7539F.A66C619A@***.net...
> Hi Norman,
> Please send pictures, I bet you'll be able to out do DougW here for
> procrastination: http://members.***.net/douglas.wilson/motormount/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
>
> Norman wrote:
> >
> > ------------------------------------
> > When I jerked hard, I could slide it about 3 inches each way from the
> > center. I'll be buying motor mounts this weekend too. Thanks Bill!
> >
> > Norman
---------------------------
OK Bill, and thanks for the link.
Norman
