05 GC codes...
Guest
Posts: n/a
Re: 05 GC codes...
When I first tried on my '02 it took several tries to get the timing
down..... give it a few more tries.
Retrieving codes:
Turn the ignition key until the digital odometer displays, repeat three
times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
the fourth "On" the odometer will be replaced with codes. If no codes are
present then "Done" will appear.
"Cal" <codom1@triad.rr.com> wrote in message
news:45e03b53$0$18865$4c368faf@roadrunner.com...
> The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> any way to retrieve codes without a scan tool?
>
> cal
>
>
down..... give it a few more tries.
Retrieving codes:
Turn the ignition key until the digital odometer displays, repeat three
times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
the fourth "On" the odometer will be replaced with codes. If no codes are
present then "Done" will appear.
"Cal" <codom1@triad.rr.com> wrote in message
news:45e03b53$0$18865$4c368faf@roadrunner.com...
> The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> any way to retrieve codes without a scan tool?
>
> cal
>
>
Guest
Posts: n/a
Re: 05 GC codes...
When I first tried on my '02 it took several tries to get the timing
down..... give it a few more tries.
Retrieving codes:
Turn the ignition key until the digital odometer displays, repeat three
times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
the fourth "On" the odometer will be replaced with codes. If no codes are
present then "Done" will appear.
"Cal" <codom1@triad.rr.com> wrote in message
news:45e03b53$0$18865$4c368faf@roadrunner.com...
> The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> any way to retrieve codes without a scan tool?
>
> cal
>
>
down..... give it a few more tries.
Retrieving codes:
Turn the ignition key until the digital odometer displays, repeat three
times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
the fourth "On" the odometer will be replaced with codes. If no codes are
present then "Done" will appear.
"Cal" <codom1@triad.rr.com> wrote in message
news:45e03b53$0$18865$4c368faf@roadrunner.com...
> The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> any way to retrieve codes without a scan tool?
>
> cal
>
>
Guest
Posts: n/a
Re: 05 GC codes...
When I first tried on my '02 it took several tries to get the timing
down..... give it a few more tries.
Retrieving codes:
Turn the ignition key until the digital odometer displays, repeat three
times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
the fourth "On" the odometer will be replaced with codes. If no codes are
present then "Done" will appear.
"Cal" <codom1@triad.rr.com> wrote in message
news:45e03b53$0$18865$4c368faf@roadrunner.com...
> The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> any way to retrieve codes without a scan tool?
>
> cal
>
>
down..... give it a few more tries.
Retrieving codes:
Turn the ignition key until the digital odometer displays, repeat three
times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
the fourth "On" the odometer will be replaced with codes. If no codes are
present then "Done" will appear.
"Cal" <codom1@triad.rr.com> wrote in message
news:45e03b53$0$18865$4c368faf@roadrunner.com...
> The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> any way to retrieve codes without a scan tool?
>
> cal
>
>
Guest
Posts: n/a
Re: 05 GC codes...
nope you need a scantool it's the new c.a.n system and autozone can't do it
either with theirs
billy ray wrote:
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
>
> "Cal" <codom1@triad.rr.com> wrote in message
> news:45e03b53$0$18865$4c368faf@roadrunner.com...
> > The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> > any way to retrieve codes without a scan tool?
> >
> > cal
> >
> >
either with theirs
billy ray wrote:
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
>
> "Cal" <codom1@triad.rr.com> wrote in message
> news:45e03b53$0$18865$4c368faf@roadrunner.com...
> > The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> > any way to retrieve codes without a scan tool?
> >
> > cal
> >
> >
Guest
Posts: n/a
Re: 05 GC codes...
nope you need a scantool it's the new c.a.n system and autozone can't do it
either with theirs
billy ray wrote:
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
>
> "Cal" <codom1@triad.rr.com> wrote in message
> news:45e03b53$0$18865$4c368faf@roadrunner.com...
> > The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> > any way to retrieve codes without a scan tool?
> >
> > cal
> >
> >
either with theirs
billy ray wrote:
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
>
> "Cal" <codom1@triad.rr.com> wrote in message
> news:45e03b53$0$18865$4c368faf@roadrunner.com...
> > The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> > any way to retrieve codes without a scan tool?
> >
> > cal
> >
> >
Guest
Posts: n/a
Re: 05 GC codes...
nope you need a scantool it's the new c.a.n system and autozone can't do it
either with theirs
billy ray wrote:
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
>
> "Cal" <codom1@triad.rr.com> wrote in message
> news:45e03b53$0$18865$4c368faf@roadrunner.com...
> > The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> > any way to retrieve codes without a scan tool?
> >
> > cal
> >
> >
either with theirs
billy ray wrote:
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
>
> "Cal" <codom1@triad.rr.com> wrote in message
> news:45e03b53$0$18865$4c368faf@roadrunner.com...
> > The 'key-on/key-off' 3 times cycle does not work on my 05 GC. Is there
> > any way to retrieve codes without a scan tool?
> >
> > cal
> >
> >
Guest
Posts: n/a
Re: 05 GC codes...
Exactly, give it time to run the initial diagnoses.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:99bc4$45e03cd6$422afc51$14342@FUSE.NET...
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:99bc4$45e03cd6$422afc51$14342@FUSE.NET...
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 05 GC codes...
Exactly, give it time to run the initial diagnoses.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:99bc4$45e03cd6$422afc51$14342@FUSE.NET...
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:99bc4$45e03cd6$422afc51$14342@FUSE.NET...
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 05 GC codes...
Exactly, give it time to run the initial diagnoses.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:99bc4$45e03cd6$422afc51$14342@FUSE.NET...
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:99bc4$45e03cd6$422afc51$14342@FUSE.NET...
> When I first tried on my '02 it took several tries to get the timing
> down..... give it a few more tries.
>
> Retrieving codes:
> Turn the ignition key until the digital odometer displays, repeat three
> times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At
> the fourth "On" the odometer will be replaced with codes. If no codes are
> present then "Done" will appear.
--
Posted via a free Usenet account from http://www.teranews.com