'04 Jeep GC--I want to install a Remote Start/Keyless Entry system but.........
Guest
Posts: n/a
'04 Jeep GC--I want to install a Remote Start/Keyless Entry system but.........
I want to install a RS/KE system but I was told a while back that my
power locks are set up such that I'll need an additional module of
some type to tie into the computer to control the locks.
I can't remember what it's called and don't know where to find it.
Does anyone know?
TIA.
Don
power locks are set up such that I'll need an additional module of
some type to tie into the computer to control the locks.
I can't remember what it's called and don't know where to find it.
Does anyone know?
TIA.
Don
Guest
Posts: n/a
Re: '04 Jeep GC--I want to install a Remote Start/Keyless Entry systembut.........
if you have the skim key system then a 555u will be needed to bypass the
skim system and that includes needing a new coded key at 50.00 +
the keyless can be done using resistors and relays but takes a while to
make the circuit so they use what's called a 465t and tie into the pci
bus system and that communicates with the computer i have done a ton of
them
Don I wrote:
> I want to install a RS/KE system but I was told a while back that my
> power locks are set up such that I'll need an additional module of
> some type to tie into the computer to control the locks.
>
> I can't remember what it's called and don't know where to find it.
>
> Does anyone know?
>
> TIA.
>
> Don
skim system and that includes needing a new coded key at 50.00 +
the keyless can be done using resistors and relays but takes a while to
make the circuit so they use what's called a 465t and tie into the pci
bus system and that communicates with the computer i have done a ton of
them
Don I wrote:
> I want to install a RS/KE system but I was told a while back that my
> power locks are set up such that I'll need an additional module of
> some type to tie into the computer to control the locks.
>
> I can't remember what it's called and don't know where to find it.
>
> Does anyone know?
>
> TIA.
>
> Don
Guest
Posts: n/a
Re: '04 Jeep GC--I want to install a Remote Start/Keyless Entry systembut.........
if you have the skim key system then a 555u will be needed to bypass the
skim system and that includes needing a new coded key at 50.00 +
the keyless can be done using resistors and relays but takes a while to
make the circuit so they use what's called a 465t and tie into the pci
bus system and that communicates with the computer i have done a ton of
them
Don I wrote:
> I want to install a RS/KE system but I was told a while back that my
> power locks are set up such that I'll need an additional module of
> some type to tie into the computer to control the locks.
>
> I can't remember what it's called and don't know where to find it.
>
> Does anyone know?
>
> TIA.
>
> Don
skim system and that includes needing a new coded key at 50.00 +
the keyless can be done using resistors and relays but takes a while to
make the circuit so they use what's called a 465t and tie into the pci
bus system and that communicates with the computer i have done a ton of
them
Don I wrote:
> I want to install a RS/KE system but I was told a while back that my
> power locks are set up such that I'll need an additional module of
> some type to tie into the computer to control the locks.
>
> I can't remember what it's called and don't know where to find it.
>
> Does anyone know?
>
> TIA.
>
> Don
Guest
Posts: n/a
Re: '04 Jeep GC--I want to install a Remote Start/Keyless Entry systembut.........
if you have the skim key system then a 555u will be needed to bypass the
skim system and that includes needing a new coded key at 50.00 +
the keyless can be done using resistors and relays but takes a while to
make the circuit so they use what's called a 465t and tie into the pci
bus system and that communicates with the computer i have done a ton of
them
Don I wrote:
> I want to install a RS/KE system but I was told a while back that my
> power locks are set up such that I'll need an additional module of
> some type to tie into the computer to control the locks.
>
> I can't remember what it's called and don't know where to find it.
>
> Does anyone know?
>
> TIA.
>
> Don
skim system and that includes needing a new coded key at 50.00 +
the keyless can be done using resistors and relays but takes a while to
make the circuit so they use what's called a 465t and tie into the pci
bus system and that communicates with the computer i have done a ton of
them
Don I wrote:
> I want to install a RS/KE system but I was told a while back that my
> power locks are set up such that I'll need an additional module of
> some type to tie into the computer to control the locks.
>
> I can't remember what it's called and don't know where to find it.
>
> Does anyone know?
>
> TIA.
>
> Don
Guest
Posts: n/a
Re: '04 Jeep GC--I want to install a Remote Start/Keyless Entry system but.........
mark12211@aol.com (Mark12211) wrote in message news:<20040103233525.15561.00002200@mb-m12.aol.com>...
> I'm pretty sure you just need a second module. Same as the other one.
????
What "other one"?
> I'm pretty sure you just need a second module. Same as the other one.
????
What "other one"?
Guest
Posts: n/a
Re: '04 Jeep GC--I want to install a Remote Start/Keyless Entry system but.........
mark12211@aol.com (Mark12211) wrote in message news:<20040103233525.15561.00002200@mb-m12.aol.com>...
> I'm pretty sure you just need a second module. Same as the other one.
????
What "other one"?
> I'm pretty sure you just need a second module. Same as the other one.
????
What "other one"?
Guest
Posts: n/a
Re: '04 Jeep GC--I want to install a Remote Start/Keyless Entry system but.........
mark12211@aol.com (Mark12211) wrote in message news:<20040103233525.15561.00002200@mb-m12.aol.com>...
> I'm pretty sure you just need a second module. Same as the other one.
????
What "other one"?
> I'm pretty sure you just need a second module. Same as the other one.
????
What "other one"?