'02 Cherokee Overdrive reinstall problem
03-11-2007, 10:42 PM
#1
Guest
Posts: n/a
'02 Cherokee Overdrive reinstall problem
Good evening, everyone!
I was asked ny a friend to reinstall his overdrive unit in his Cherokee
this weekend. He was recently injured and could not assist me, other than
lending moral support from his wheelchair.
I was unable to get the overdrive unit mated to the bellhousing of the
tranny, lacking about one inch until it mated. I feel all the splines were
aligned but couldn't physically push the unit all of the way.
There was a thin metal rod justing out from the tranny..could that be
stopping the unit from mating completely? I was hesitant to use any force.
Do we need an alignment tool of any kind or just a big hammer? :-)
Thanks in advance!
Pat
I was asked ny a friend to reinstall his overdrive unit in his Cherokee
this weekend. He was recently injured and could not assist me, other than
lending moral support from his wheelchair.
I was unable to get the overdrive unit mated to the bellhousing of the
tranny, lacking about one inch until it mated. I feel all the splines were
aligned but couldn't physically push the unit all of the way.
There was a thin metal rod justing out from the tranny..could that be
stopping the unit from mating completely? I was hesitant to use any force.
Do we need an alignment tool of any kind or just a big hammer? :-)
Thanks in advance!
Pat
03-12-2007, 12:31 AM
#2
Guest
Posts: n/a
Re: '02 Cherokee Overdrive reinstall problem
You need the clutch disk alignment tool. You were right not to force it,
it would have been junk.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"pr" <proddy@charter.net> wrote in message news:m63Jh.6689$B7.5238@bigfe9...
> Good evening, everyone!
>
> I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> this weekend. He was recently injured and could not assist me, other than
> lending moral support from his wheelchair.
>
> I was unable to get the overdrive unit mated to the bellhousing of the
> tranny, lacking about one inch until it mated. I feel all the splines
were
> aligned but couldn't physically push the unit all of the way.
>
> There was a thin metal rod justing out from the tranny..could that be
> stopping the unit from mating completely? I was hesitant to use any
force.
>
> Do we need an alignment tool of any kind or just a big hammer? :-)
>
> Thanks in advance!
>
> Pat
--
Posted via a free Usenet account from http://www.teranews.com
it would have been junk.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"pr" <proddy@charter.net> wrote in message news:m63Jh.6689$B7.5238@bigfe9...
> Good evening, everyone!
>
> I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> this weekend. He was recently injured and could not assist me, other than
> lending moral support from his wheelchair.
>
> I was unable to get the overdrive unit mated to the bellhousing of the
> tranny, lacking about one inch until it mated. I feel all the splines
were
> aligned but couldn't physically push the unit all of the way.
>
> There was a thin metal rod justing out from the tranny..could that be
> stopping the unit from mating completely? I was hesitant to use any
force.
>
> Do we need an alignment tool of any kind or just a big hammer? :-)
>
> Thanks in advance!
>
> Pat
--
Posted via a free Usenet account from http://www.teranews.com
03-12-2007, 12:31 AM
#3
Guest
Posts: n/a
Re: '02 Cherokee Overdrive reinstall problem
You need the clutch disk alignment tool. You were right not to force it,
it would have been junk.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"pr" <proddy@charter.net> wrote in message news:m63Jh.6689$B7.5238@bigfe9...
> Good evening, everyone!
>
> I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> this weekend. He was recently injured and could not assist me, other than
> lending moral support from his wheelchair.
>
> I was unable to get the overdrive unit mated to the bellhousing of the
> tranny, lacking about one inch until it mated. I feel all the splines
were
> aligned but couldn't physically push the unit all of the way.
>
> There was a thin metal rod justing out from the tranny..could that be
> stopping the unit from mating completely? I was hesitant to use any
force.
>
> Do we need an alignment tool of any kind or just a big hammer? :-)
>
> Thanks in advance!
>
> Pat
--
Posted via a free Usenet account from http://www.teranews.com
it would have been junk.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"pr" <proddy@charter.net> wrote in message news:m63Jh.6689$B7.5238@bigfe9...
> Good evening, everyone!
>
> I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> this weekend. He was recently injured and could not assist me, other than
> lending moral support from his wheelchair.
>
> I was unable to get the overdrive unit mated to the bellhousing of the
> tranny, lacking about one inch until it mated. I feel all the splines
were
> aligned but couldn't physically push the unit all of the way.
>
> There was a thin metal rod justing out from the tranny..could that be
> stopping the unit from mating completely? I was hesitant to use any
force.
>
> Do we need an alignment tool of any kind or just a big hammer? :-)
>
> Thanks in advance!
>
> Pat
--
Posted via a free Usenet account from http://www.teranews.com
03-12-2007, 12:31 AM
#4
Guest
Posts: n/a
Re: '02 Cherokee Overdrive reinstall problem
You need the clutch disk alignment tool. You were right not to force it,
it would have been junk.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"pr" <proddy@charter.net> wrote in message news:m63Jh.6689$B7.5238@bigfe9...
> Good evening, everyone!
>
> I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> this weekend. He was recently injured and could not assist me, other than
> lending moral support from his wheelchair.
>
> I was unable to get the overdrive unit mated to the bellhousing of the
> tranny, lacking about one inch until it mated. I feel all the splines
were
> aligned but couldn't physically push the unit all of the way.
>
> There was a thin metal rod justing out from the tranny..could that be
> stopping the unit from mating completely? I was hesitant to use any
force.
>
> Do we need an alignment tool of any kind or just a big hammer? :-)
>
> Thanks in advance!
>
> Pat
--
Posted via a free Usenet account from http://www.teranews.com
it would have been junk.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"pr" <proddy@charter.net> wrote in message news:m63Jh.6689$B7.5238@bigfe9...
> Good evening, everyone!
>
> I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> this weekend. He was recently injured and could not assist me, other than
> lending moral support from his wheelchair.
>
> I was unable to get the overdrive unit mated to the bellhousing of the
> tranny, lacking about one inch until it mated. I feel all the splines
were
> aligned but couldn't physically push the unit all of the way.
>
> There was a thin metal rod justing out from the tranny..could that be
> stopping the unit from mating completely? I was hesitant to use any
force.
>
> Do we need an alignment tool of any kind or just a big hammer? :-)
>
> Thanks in advance!
>
> Pat
--
Posted via a free Usenet account from http://www.teranews.com
03-12-2007, 04:40 PM
#5
Guest
Posts: n/a
Re: '02 Cherokee Overdrive reinstall problem
On Mar 11, 9:31 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
wrote:
> You need the clutch disk alignment tool. You were right not to force it,
> it would have been junk.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
>
>
>
>
>
>
> "pr" <pro...@charter.net> wrote in messagenews:m63Jh.6689$B7.5238@bigfe9...
> > Good evening, everyone!
>
> > I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> > this weekend. He was recently injured and could not assist me, other than
> > lending moral support from his wheelchair.
>
> > I was unable to get the overdrive unit mated to the bellhousing of the
> > tranny, lacking about one inch until it mated. I feel all the splines
> were
> > aligned but couldn't physically push the unit all of the way.
>
> > There was a thin metal rod justing out from the tranny..could that be
> > stopping the unit from mating completely? I was hesitant to use any
> force.
>
> > Do we need an alignment tool of any kind or just a big hammer? :-)
>
> > Thanks in advance!
>
> > Pat
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com- Hide quoted text -
>
> - Show quoted text -
Any chance you're referring to the OD unit on the Dodge automatic?
wrote:
> You need the clutch disk alignment tool. You were right not to force it,
> it would have been junk.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
>
>
>
>
>
>
> "pr" <pro...@charter.net> wrote in messagenews:m63Jh.6689$B7.5238@bigfe9...
> > Good evening, everyone!
>
> > I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> > this weekend. He was recently injured and could not assist me, other than
> > lending moral support from his wheelchair.
>
> > I was unable to get the overdrive unit mated to the bellhousing of the
> > tranny, lacking about one inch until it mated. I feel all the splines
> were
> > aligned but couldn't physically push the unit all of the way.
>
> > There was a thin metal rod justing out from the tranny..could that be
> > stopping the unit from mating completely? I was hesitant to use any
> force.
>
> > Do we need an alignment tool of any kind or just a big hammer? :-)
>
> > Thanks in advance!
>
> > Pat
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com- Hide quoted text -
>
> - Show quoted text -
Any chance you're referring to the OD unit on the Dodge automatic?
03-12-2007, 04:40 PM
#6
Guest
Posts: n/a
Re: '02 Cherokee Overdrive reinstall problem
On Mar 11, 9:31 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
wrote:
> You need the clutch disk alignment tool. You were right not to force it,
> it would have been junk.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
>
>
>
>
>
>
> "pr" <pro...@charter.net> wrote in messagenews:m63Jh.6689$B7.5238@bigfe9...
> > Good evening, everyone!
>
> > I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> > this weekend. He was recently injured and could not assist me, other than
> > lending moral support from his wheelchair.
>
> > I was unable to get the overdrive unit mated to the bellhousing of the
> > tranny, lacking about one inch until it mated. I feel all the splines
> were
> > aligned but couldn't physically push the unit all of the way.
>
> > There was a thin metal rod justing out from the tranny..could that be
> > stopping the unit from mating completely? I was hesitant to use any
> force.
>
> > Do we need an alignment tool of any kind or just a big hammer? :-)
>
> > Thanks in advance!
>
> > Pat
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com- Hide quoted text -
>
> - Show quoted text -
Any chance you're referring to the OD unit on the Dodge automatic?
wrote:
> You need the clutch disk alignment tool. You were right not to force it,
> it would have been junk.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
>
>
>
>
>
>
> "pr" <pro...@charter.net> wrote in messagenews:m63Jh.6689$B7.5238@bigfe9...
> > Good evening, everyone!
>
> > I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> > this weekend. He was recently injured and could not assist me, other than
> > lending moral support from his wheelchair.
>
> > I was unable to get the overdrive unit mated to the bellhousing of the
> > tranny, lacking about one inch until it mated. I feel all the splines
> were
> > aligned but couldn't physically push the unit all of the way.
>
> > There was a thin metal rod justing out from the tranny..could that be
> > stopping the unit from mating completely? I was hesitant to use any
> force.
>
> > Do we need an alignment tool of any kind or just a big hammer? :-)
>
> > Thanks in advance!
>
> > Pat
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com- Hide quoted text -
>
> - Show quoted text -
Any chance you're referring to the OD unit on the Dodge automatic?
03-12-2007, 04:40 PM
#7
Guest
Posts: n/a
Re: '02 Cherokee Overdrive reinstall problem
On Mar 11, 9:31 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
wrote:
> You need the clutch disk alignment tool. You were right not to force it,
> it would have been junk.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
>
>
>
>
>
>
> "pr" <pro...@charter.net> wrote in messagenews:m63Jh.6689$B7.5238@bigfe9...
> > Good evening, everyone!
>
> > I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> > this weekend. He was recently injured and could not assist me, other than
> > lending moral support from his wheelchair.
>
> > I was unable to get the overdrive unit mated to the bellhousing of the
> > tranny, lacking about one inch until it mated. I feel all the splines
> were
> > aligned but couldn't physically push the unit all of the way.
>
> > There was a thin metal rod justing out from the tranny..could that be
> > stopping the unit from mating completely? I was hesitant to use any
> force.
>
> > Do we need an alignment tool of any kind or just a big hammer? :-)
>
> > Thanks in advance!
>
> > Pat
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com- Hide quoted text -
>
> - Show quoted text -
Any chance you're referring to the OD unit on the Dodge automatic?
wrote:
> You need the clutch disk alignment tool. You were right not to force it,
> it would have been junk.
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
>
>
>
>
>
>
> "pr" <pro...@charter.net> wrote in messagenews:m63Jh.6689$B7.5238@bigfe9...
> > Good evening, everyone!
>
> > I was asked ny a friend to reinstall his overdrive unit in his Cherokee
> > this weekend. He was recently injured and could not assist me, other than
> > lending moral support from his wheelchair.
>
> > I was unable to get the overdrive unit mated to the bellhousing of the
> > tranny, lacking about one inch until it mated. I feel all the splines
> were
> > aligned but couldn't physically push the unit all of the way.
>
> > There was a thin metal rod justing out from the tranny..could that be
> > stopping the unit from mating completely? I was hesitant to use any
> force.
>
> > Do we need an alignment tool of any kind or just a big hammer? :-)
>
> > Thanks in advance!
>
> > Pat
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com- Hide quoted text -
>
> - Show quoted text -
Any chance you're referring to the OD unit on the Dodge automatic?
03-12-2007, 07:44 PM
#8
Guest
Posts: n/a
Re: '02 Cherokee Overdrive reinstall problem
Maybe, but I've never had any problem sliding the torque converter up
against the flex plate, then turning it to bolt up.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Jon" <jongoddard@gmail.com> wrote in message
news:1173732023.376623.236660@30g2000cwc.googlegro ups.com
>
> Any chance you're referring to the OD unit on the Dodge automatic?
>
--
Posted via a free Usenet account from http://www.teranews.com
against the flex plate, then turning it to bolt up.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Jon" <jongoddard@gmail.com> wrote in message
news:1173732023.376623.236660@30g2000cwc.googlegro ups.com
>
> Any chance you're referring to the OD unit on the Dodge automatic?
>
--
Posted via a free Usenet account from http://www.teranews.com
03-12-2007, 07:44 PM
#9
Guest
Posts: n/a
Re: '02 Cherokee Overdrive reinstall problem
Maybe, but I've never had any problem sliding the torque converter up
against the flex plate, then turning it to bolt up.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Jon" <jongoddard@gmail.com> wrote in message
news:1173732023.376623.236660@30g2000cwc.googlegro ups.com
>
> Any chance you're referring to the OD unit on the Dodge automatic?
>
--
Posted via a free Usenet account from http://www.teranews.com
against the flex plate, then turning it to bolt up.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Jon" <jongoddard@gmail.com> wrote in message
news:1173732023.376623.236660@30g2000cwc.googlegro ups.com
>
> Any chance you're referring to the OD unit on the Dodge automatic?
>
--
Posted via a free Usenet account from http://www.teranews.com
03-12-2007, 07:44 PM
#10
Guest
Posts: n/a
Re: '02 Cherokee Overdrive reinstall problem
Maybe, but I've never had any problem sliding the torque converter up
against the flex plate, then turning it to bolt up.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Jon" <jongoddard@gmail.com> wrote in message
news:1173732023.376623.236660@30g2000cwc.googlegro ups.com
>
> Any chance you're referring to the OD unit on the Dodge automatic?
>
--
Posted via a free Usenet account from http://www.teranews.com
against the flex plate, then turning it to bolt up.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Jon" <jongoddard@gmail.com> wrote in message
news:1173732023.376623.236660@30g2000cwc.googlegro ups.com
>
> Any chance you're referring to the OD unit on the Dodge automatic?
>
--
Posted via a free Usenet account from http://www.teranews.com
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
