[ot] I won a toy!
#11
Guest
Posts: n/a
Re: [ot] I won a toy!
Gary Tateosian did pass the time by typing:
> "DougW" wrote:
>
>> So here, sitting in front of the monitor is a bran spanking new
>> Tektronix TDS2002 two channel digital storage oscilloscope with
>> test probes.
> ...sweet. Hmm I could use one of those right about now to work on one
> of my tube amps... =-)
Don't remind me. I've got a friend that has two Onkyo amps that need
to be fixed. Damn things weigh over 100lbs. It's easier to go there
than truck them here.
--
DougW
> "DougW" wrote:
>
>> So here, sitting in front of the monitor is a bran spanking new
>> Tektronix TDS2002 two channel digital storage oscilloscope with
>> test probes.
> ...sweet. Hmm I could use one of those right about now to work on one
> of my tube amps... =-)
Don't remind me. I've got a friend that has two Onkyo amps that need
to be fixed. Damn things weigh over 100lbs. It's easier to go there
than truck them here.
--
DougW
#12
Guest
Posts: n/a
Re: [ot] I won a toy!
Gary Tateosian did pass the time by typing:
> "DougW" wrote:
>
>> So here, sitting in front of the monitor is a bran spanking new
>> Tektronix TDS2002 two channel digital storage oscilloscope with
>> test probes.
> ...sweet. Hmm I could use one of those right about now to work on one
> of my tube amps... =-)
Don't remind me. I've got a friend that has two Onkyo amps that need
to be fixed. Damn things weigh over 100lbs. It's easier to go there
than truck them here.
--
DougW
> "DougW" wrote:
>
>> So here, sitting in front of the monitor is a bran spanking new
>> Tektronix TDS2002 two channel digital storage oscilloscope with
>> test probes.
> ...sweet. Hmm I could use one of those right about now to work on one
> of my tube amps... =-)
Don't remind me. I've got a friend that has two Onkyo amps that need
to be fixed. Damn things weigh over 100lbs. It's easier to go there
than truck them here.
--
DougW
#13
Guest
Posts: n/a
Re: [ot] I won a toy!
Gary Tateosian did pass the time by typing:
> "DougW" wrote:
>
>> So here, sitting in front of the monitor is a bran spanking new
>> Tektronix TDS2002 two channel digital storage oscilloscope with
>> test probes.
> ...sweet. Hmm I could use one of those right about now to work on one
> of my tube amps... =-)
Don't remind me. I've got a friend that has two Onkyo amps that need
to be fixed. Damn things weigh over 100lbs. It's easier to go there
than truck them here.
--
DougW
> "DougW" wrote:
>
>> So here, sitting in front of the monitor is a bran spanking new
>> Tektronix TDS2002 two channel digital storage oscilloscope with
>> test probes.
> ...sweet. Hmm I could use one of those right about now to work on one
> of my tube amps... =-)
Don't remind me. I've got a friend that has two Onkyo amps that need
to be fixed. Damn things weigh over 100lbs. It's easier to go there
than truck them here.
--
DougW
#14
Guest
Posts: n/a
Re: [ot] I won a toy!
L.W. (ßill) ------ III did pass the time by typing:
> Hi Doug,
> Congratulations. What are you going to test with it, stuffed
> circuit boards, your heart beat?
> http://www.avalontest.com/shop/tektr...ds2002_tek.htm
Thanks, I was just about to go looking for parts and prices.
Actually the first thing to get tested and recorded will be the
O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
and the spark profile. Should be able to use the sensor from my
engine analyzier to feed the scope. Then all the stuff I couldn't
test before with just a multimeter. Like the CPS and camshaft sensor.
Then comes the power supply for my JVC HR-D970U VCR. It took a
good whack few years back and never has acted properly.
CRAP! I've got another hoby back from the hoby graveyard. :)
Still have to order the PC interface. I plan on having a page
with waveforms from good sensors and might even slide a bad
sensor back in to watch what it does. But first I need some
"expendable" probes and a good protective case.
--
DougW
> Hi Doug,
> Congratulations. What are you going to test with it, stuffed
> circuit boards, your heart beat?
> http://www.avalontest.com/shop/tektr...ds2002_tek.htm
Thanks, I was just about to go looking for parts and prices.
Actually the first thing to get tested and recorded will be the
O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
and the spark profile. Should be able to use the sensor from my
engine analyzier to feed the scope. Then all the stuff I couldn't
test before with just a multimeter. Like the CPS and camshaft sensor.
Then comes the power supply for my JVC HR-D970U VCR. It took a
good whack few years back and never has acted properly.
CRAP! I've got another hoby back from the hoby graveyard. :)
Still have to order the PC interface. I plan on having a page
with waveforms from good sensors and might even slide a bad
sensor back in to watch what it does. But first I need some
"expendable" probes and a good protective case.
--
DougW
#15
Guest
Posts: n/a
Re: [ot] I won a toy!
L.W. (ßill) ------ III did pass the time by typing:
> Hi Doug,
> Congratulations. What are you going to test with it, stuffed
> circuit boards, your heart beat?
> http://www.avalontest.com/shop/tektr...ds2002_tek.htm
Thanks, I was just about to go looking for parts and prices.
Actually the first thing to get tested and recorded will be the
O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
and the spark profile. Should be able to use the sensor from my
engine analyzier to feed the scope. Then all the stuff I couldn't
test before with just a multimeter. Like the CPS and camshaft sensor.
Then comes the power supply for my JVC HR-D970U VCR. It took a
good whack few years back and never has acted properly.
CRAP! I've got another hoby back from the hoby graveyard. :)
Still have to order the PC interface. I plan on having a page
with waveforms from good sensors and might even slide a bad
sensor back in to watch what it does. But first I need some
"expendable" probes and a good protective case.
--
DougW
> Hi Doug,
> Congratulations. What are you going to test with it, stuffed
> circuit boards, your heart beat?
> http://www.avalontest.com/shop/tektr...ds2002_tek.htm
Thanks, I was just about to go looking for parts and prices.
Actually the first thing to get tested and recorded will be the
O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
and the spark profile. Should be able to use the sensor from my
engine analyzier to feed the scope. Then all the stuff I couldn't
test before with just a multimeter. Like the CPS and camshaft sensor.
Then comes the power supply for my JVC HR-D970U VCR. It took a
good whack few years back and never has acted properly.
CRAP! I've got another hoby back from the hoby graveyard. :)
Still have to order the PC interface. I plan on having a page
with waveforms from good sensors and might even slide a bad
sensor back in to watch what it does. But first I need some
"expendable" probes and a good protective case.
--
DougW
#16
Guest
Posts: n/a
Re: [ot] I won a toy!
L.W. (ßill) ------ III did pass the time by typing:
> Hi Doug,
> Congratulations. What are you going to test with it, stuffed
> circuit boards, your heart beat?
> http://www.avalontest.com/shop/tektr...ds2002_tek.htm
Thanks, I was just about to go looking for parts and prices.
Actually the first thing to get tested and recorded will be the
O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
and the spark profile. Should be able to use the sensor from my
engine analyzier to feed the scope. Then all the stuff I couldn't
test before with just a multimeter. Like the CPS and camshaft sensor.
Then comes the power supply for my JVC HR-D970U VCR. It took a
good whack few years back and never has acted properly.
CRAP! I've got another hoby back from the hoby graveyard. :)
Still have to order the PC interface. I plan on having a page
with waveforms from good sensors and might even slide a bad
sensor back in to watch what it does. But first I need some
"expendable" probes and a good protective case.
--
DougW
> Hi Doug,
> Congratulations. What are you going to test with it, stuffed
> circuit boards, your heart beat?
> http://www.avalontest.com/shop/tektr...ds2002_tek.htm
Thanks, I was just about to go looking for parts and prices.
Actually the first thing to get tested and recorded will be the
O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
and the spark profile. Should be able to use the sensor from my
engine analyzier to feed the scope. Then all the stuff I couldn't
test before with just a multimeter. Like the CPS and camshaft sensor.
Then comes the power supply for my JVC HR-D970U VCR. It took a
good whack few years back and never has acted properly.
CRAP! I've got another hoby back from the hoby graveyard. :)
Still have to order the PC interface. I plan on having a page
with waveforms from good sensors and might even slide a bad
sensor back in to watch what it does. But first I need some
"expendable" probes and a good protective case.
--
DougW
#17
Guest
Posts: n/a
Re: [ot] I won a toy!
L.W. (ßill) ------ III did pass the time by typing:
> Hi Doug,
> Congratulations. What are you going to test with it, stuffed
> circuit boards, your heart beat?
> http://www.avalontest.com/shop/tektr...ds2002_tek.htm
Thanks, I was just about to go looking for parts and prices.
Actually the first thing to get tested and recorded will be the
O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
and the spark profile. Should be able to use the sensor from my
engine analyzier to feed the scope. Then all the stuff I couldn't
test before with just a multimeter. Like the CPS and camshaft sensor.
Then comes the power supply for my JVC HR-D970U VCR. It took a
good whack few years back and never has acted properly.
CRAP! I've got another hoby back from the hoby graveyard. :)
Still have to order the PC interface. I plan on having a page
with waveforms from good sensors and might even slide a bad
sensor back in to watch what it does. But first I need some
"expendable" probes and a good protective case.
--
DougW
> Hi Doug,
> Congratulations. What are you going to test with it, stuffed
> circuit boards, your heart beat?
> http://www.avalontest.com/shop/tektr...ds2002_tek.htm
Thanks, I was just about to go looking for parts and prices.
Actually the first thing to get tested and recorded will be the
O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
and the spark profile. Should be able to use the sensor from my
engine analyzier to feed the scope. Then all the stuff I couldn't
test before with just a multimeter. Like the CPS and camshaft sensor.
Then comes the power supply for my JVC HR-D970U VCR. It took a
good whack few years back and never has acted properly.
CRAP! I've got another hoby back from the hoby graveyard. :)
Still have to order the PC interface. I plan on having a page
with waveforms from good sensors and might even slide a bad
sensor back in to watch what it does. But first I need some
"expendable" probes and a good protective case.
--
DougW
#18
Guest
Posts: n/a
Re: [ot] I won a toy!
Cool.
DougW wrote:
>
> Thanks, I was just about to go looking for parts and prices.
>
> Actually the first thing to get tested and recorded will be the
> O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
> and the spark profile. Should be able to use the sensor from my
> engine analyzier to feed the scope. Then all the stuff I couldn't
> test before with just a multimeter. Like the CPS and camshaft sensor.
>
> Then comes the power supply for my JVC HR-D970U VCR. It took a
> good whack few years back and never has acted properly.
>
> CRAP! I've got another hoby back from the hoby graveyard. :)
>
> Still have to order the PC interface. I plan on having a page
> with waveforms from good sensors and might even slide a bad
> sensor back in to watch what it does. But first I need some
> "expendable" probes and a good protective case.
>
> --
> DougW
DougW wrote:
>
> Thanks, I was just about to go looking for parts and prices.
>
> Actually the first thing to get tested and recorded will be the
> O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
> and the spark profile. Should be able to use the sensor from my
> engine analyzier to feed the scope. Then all the stuff I couldn't
> test before with just a multimeter. Like the CPS and camshaft sensor.
>
> Then comes the power supply for my JVC HR-D970U VCR. It took a
> good whack few years back and never has acted properly.
>
> CRAP! I've got another hoby back from the hoby graveyard. :)
>
> Still have to order the PC interface. I plan on having a page
> with waveforms from good sensors and might even slide a bad
> sensor back in to watch what it does. But first I need some
> "expendable" probes and a good protective case.
>
> --
> DougW
#19
Guest
Posts: n/a
Re: [ot] I won a toy!
Cool.
DougW wrote:
>
> Thanks, I was just about to go looking for parts and prices.
>
> Actually the first thing to get tested and recorded will be the
> O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
> and the spark profile. Should be able to use the sensor from my
> engine analyzier to feed the scope. Then all the stuff I couldn't
> test before with just a multimeter. Like the CPS and camshaft sensor.
>
> Then comes the power supply for my JVC HR-D970U VCR. It took a
> good whack few years back and never has acted properly.
>
> CRAP! I've got another hoby back from the hoby graveyard. :)
>
> Still have to order the PC interface. I plan on having a page
> with waveforms from good sensors and might even slide a bad
> sensor back in to watch what it does. But first I need some
> "expendable" probes and a good protective case.
>
> --
> DougW
DougW wrote:
>
> Thanks, I was just about to go looking for parts and prices.
>
> Actually the first thing to get tested and recorded will be the
> O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
> and the spark profile. Should be able to use the sensor from my
> engine analyzier to feed the scope. Then all the stuff I couldn't
> test before with just a multimeter. Like the CPS and camshaft sensor.
>
> Then comes the power supply for my JVC HR-D970U VCR. It took a
> good whack few years back and never has acted properly.
>
> CRAP! I've got another hoby back from the hoby graveyard. :)
>
> Still have to order the PC interface. I plan on having a page
> with waveforms from good sensors and might even slide a bad
> sensor back in to watch what it does. But first I need some
> "expendable" probes and a good protective case.
>
> --
> DougW
#20
Guest
Posts: n/a
Re: [ot] I won a toy!
Cool.
DougW wrote:
>
> Thanks, I was just about to go looking for parts and prices.
>
> Actually the first thing to get tested and recorded will be the
> O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
> and the spark profile. Should be able to use the sensor from my
> engine analyzier to feed the scope. Then all the stuff I couldn't
> test before with just a multimeter. Like the CPS and camshaft sensor.
>
> Then comes the power supply for my JVC HR-D970U VCR. It took a
> good whack few years back and never has acted properly.
>
> CRAP! I've got another hoby back from the hoby graveyard. :)
>
> Still have to order the PC interface. I plan on having a page
> with waveforms from good sensors and might even slide a bad
> sensor back in to watch what it does. But first I need some
> "expendable" probes and a good protective case.
>
> --
> DougW
DougW wrote:
>
> Thanks, I was just about to go looking for parts and prices.
>
> Actually the first thing to get tested and recorded will be the
> O2 sensor input on the Jeep, the 5 and 8V outputs from the ECU,
> and the spark profile. Should be able to use the sensor from my
> engine analyzier to feed the scope. Then all the stuff I couldn't
> test before with just a multimeter. Like the CPS and camshaft sensor.
>
> Then comes the power supply for my JVC HR-D970U VCR. It took a
> good whack few years back and never has acted properly.
>
> CRAP! I've got another hoby back from the hoby graveyard. :)
>
> Still have to order the PC interface. I plan on having a page
> with waveforms from good sensors and might even slide a bad
> sensor back in to watch what it does. But first I need some
> "expendable" probes and a good protective case.
>
> --
> DougW