|
Re: *How to for a U Joint.....*
I JUST did this, had a "took took" sound.
rent a slide hammer, It was a lot of grunting to get the hub out..... "Brian" <urk500@yahoo.com> wrote in message news:wpZ9e.10642$sp3.9592@newsread3.news.atl.earth link.net... > Hi, changing a front end u joint the right side. 1st time doing this. > Before i go ahead start this weekend thought I would ask if anyone has a > good "How to" step by step web page or anything else? So I might make > quicker,safer work of this task. Although I have help, I have been told if > I do this wrong the results could be disastrous. :-| > > Any advice would be welcome and appreciated...... > > -Brian > 91 YJ 4.0 > > o_o_o_o > /| ,[_____], > |ŻŻŻL --O|||||||O- > ()_)Ż()_) ŻŻŻ )_) > > > |
Re: *How to for a U Joint.....*
I JUST did this, had a "took took" sound.
rent a slide hammer, It was a lot of grunting to get the hub out..... "Brian" <urk500@yahoo.com> wrote in message news:wpZ9e.10642$sp3.9592@newsread3.news.atl.earth link.net... > Hi, changing a front end u joint the right side. 1st time doing this. > Before i go ahead start this weekend thought I would ask if anyone has a > good "How to" step by step web page or anything else? So I might make > quicker,safer work of this task. Although I have help, I have been told if > I do this wrong the results could be disastrous. :-| > > Any advice would be welcome and appreciated...... > > -Brian > 91 YJ 4.0 > > o_o_o_o > /| ,[_____], > |ŻŻŻL --O|||||||O- > ()_)Ż()_) ŻŻŻ )_) > > > |
Re: *How to for a U Joint.....*
I JUST did this, had a "took took" sound.
rent a slide hammer, It was a lot of grunting to get the hub out..... "Brian" <urk500@yahoo.com> wrote in message news:wpZ9e.10642$sp3.9592@newsread3.news.atl.earth link.net... > Hi, changing a front end u joint the right side. 1st time doing this. > Before i go ahead start this weekend thought I would ask if anyone has a > good "How to" step by step web page or anything else? So I might make > quicker,safer work of this task. Although I have help, I have been told if > I do this wrong the results could be disastrous. :-| > > Any advice would be welcome and appreciated...... > > -Brian > 91 YJ 4.0 > > o_o_o_o > /| ,[_____], > |ŻŻŻL --O|||||||O- > ()_)Ż()_) ŻŻŻ )_) > > > |
Re: *How to for a U Joint.....*
Wow!
You managed to get the hub out in one piece with a slap hammer!!!???? Crap man, those are sealed hubs and normally pull apart into pieces way before the spindle is going to move. Or can/did you do it leaving the axle nut in place and slap the whole works out? I use a sacrificial bolt and cut the wheels one way then the other so I can hammer it out from behind. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Pi-Eyed Piper wrote: > > I JUST did this, had a "took took" sound. > > rent a slide hammer, It was a lot of grunting to get the hub out..... > > "Brian" <urk500@yahoo.com> wrote in message > news:wpZ9e.10642$sp3.9592@newsread3.news.atl.earth link.net... > > Hi, changing a front end u joint the right side. 1st time doing this. > > Before i go ahead start this weekend thought I would ask if anyone has a > > good "How to" step by step web page or anything else? So I might make > > quicker,safer work of this task. Although I have help, I have been told if > > I do this wrong the results could be disastrous. :-| > > > > Any advice would be welcome and appreciated...... > > > > -Brian > > 91 YJ 4.0 > > > > o_o_o_o > > /| ,[_____], > > |ŻŻŻL --O|||||||O- > > ()_)Ż()_) ŻŻŻ )_) > > > > > > |
Re: *How to for a U Joint.....*
Wow!
You managed to get the hub out in one piece with a slap hammer!!!???? Crap man, those are sealed hubs and normally pull apart into pieces way before the spindle is going to move. Or can/did you do it leaving the axle nut in place and slap the whole works out? I use a sacrificial bolt and cut the wheels one way then the other so I can hammer it out from behind. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Pi-Eyed Piper wrote: > > I JUST did this, had a "took took" sound. > > rent a slide hammer, It was a lot of grunting to get the hub out..... > > "Brian" <urk500@yahoo.com> wrote in message > news:wpZ9e.10642$sp3.9592@newsread3.news.atl.earth link.net... > > Hi, changing a front end u joint the right side. 1st time doing this. > > Before i go ahead start this weekend thought I would ask if anyone has a > > good "How to" step by step web page or anything else? So I might make > > quicker,safer work of this task. Although I have help, I have been told if > > I do this wrong the results could be disastrous. :-| > > > > Any advice would be welcome and appreciated...... > > > > -Brian > > 91 YJ 4.0 > > > > o_o_o_o > > /| ,[_____], > > |ŻŻŻL --O|||||||O- > > ()_)Ż()_) ŻŻŻ )_) > > > > > > |
Re: *How to for a U Joint.....*
Wow!
You managed to get the hub out in one piece with a slap hammer!!!???? Crap man, those are sealed hubs and normally pull apart into pieces way before the spindle is going to move. Or can/did you do it leaving the axle nut in place and slap the whole works out? I use a sacrificial bolt and cut the wheels one way then the other so I can hammer it out from behind. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Pi-Eyed Piper wrote: > > I JUST did this, had a "took took" sound. > > rent a slide hammer, It was a lot of grunting to get the hub out..... > > "Brian" <urk500@yahoo.com> wrote in message > news:wpZ9e.10642$sp3.9592@newsread3.news.atl.earth link.net... > > Hi, changing a front end u joint the right side. 1st time doing this. > > Before i go ahead start this weekend thought I would ask if anyone has a > > good "How to" step by step web page or anything else? So I might make > > quicker,safer work of this task. Although I have help, I have been told if > > I do this wrong the results could be disastrous. :-| > > > > Any advice would be welcome and appreciated...... > > > > -Brian > > 91 YJ 4.0 > > > > o_o_o_o > > /| ,[_____], > > |ŻŻŻL --O|||||||O- > > ()_)Ż()_) ŻŻŻ )_) > > > > > > |
Re: *How to for a U Joint.....*
Wow!
You managed to get the hub out in one piece with a slap hammer!!!???? Crap man, those are sealed hubs and normally pull apart into pieces way before the spindle is going to move. Or can/did you do it leaving the axle nut in place and slap the whole works out? I use a sacrificial bolt and cut the wheels one way then the other so I can hammer it out from behind. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Pi-Eyed Piper wrote: > > I JUST did this, had a "took took" sound. > > rent a slide hammer, It was a lot of grunting to get the hub out..... > > "Brian" <urk500@yahoo.com> wrote in message > news:wpZ9e.10642$sp3.9592@newsread3.news.atl.earth link.net... > > Hi, changing a front end u joint the right side. 1st time doing this. > > Before i go ahead start this weekend thought I would ask if anyone has a > > good "How to" step by step web page or anything else? So I might make > > quicker,safer work of this task. Although I have help, I have been told if > > I do this wrong the results could be disastrous. :-| > > > > Any advice would be welcome and appreciated...... > > > > -Brian > > 91 YJ 4.0 > > > > o_o_o_o > > /| ,[_____], > > |ŻŻŻL --O|||||||O- > > ()_)Ż()_) ŻŻŻ )_) > > > > > > |
Re: *How to for a U Joint.....*
I shouldn't say this....I used an air chissel...got it out far enough I
could use a BFH from the front. I managed to destroy one of the bolt holes in assembly the with the chissel which I had to fix. The guy that changed them last time, whenever that was, managed to bend the yoke enough that it required some force and ignorance to make it work. Wasn't a fun job...im not the best wrencher but I'll try anything. Learned that I don't like changing those u-joints though.... "Mike Romain" <romainm@sympatico.ca> wrote in message news:42692B44.1C06BF0B@sympatico.ca... > Wow! > > You managed to get the hub out in one piece with a slap hammer!!!???? > > Crap man, those are sealed hubs and normally pull apart into pieces way > before the spindle is going to move. > > Or can/did you do it leaving the axle nut in place and slap the whole > works out? > > I use a sacrificial bolt and cut the wheels one way then the other so I > can hammer it out from behind. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > > Pi-Eyed Piper wrote: >> >> I JUST did this, had a "took took" sound. >> >> rent a slide hammer, It was a lot of grunting to get the hub out..... >> >> "Brian" <urk500@yahoo.com> wrote in message >> news:wpZ9e.10642$sp3.9592@newsread3.news.atl.earth link.net... >> > Hi, changing a front end u joint the right side. 1st time doing this. >> > Before i go ahead start this weekend thought I would ask if anyone has >> > a >> > good "How to" step by step web page or anything else? So I might make >> > quicker,safer work of this task. Although I have help, I have been told >> > if >> > I do this wrong the results could be disastrous. :-| >> > >> > Any advice would be welcome and appreciated...... >> > >> > -Brian >> > 91 YJ 4.0 >> > >> > o_o_o_o >> > /| ,[_____], >> > |ŻŻŻL --O|||||||O- >> > ()_)Ż()_) ŻŻŻ )_) >> > >> > >> > |
Re: *How to for a U Joint.....*
I shouldn't say this....I used an air chissel...got it out far enough I
could use a BFH from the front. I managed to destroy one of the bolt holes in assembly the with the chissel which I had to fix. The guy that changed them last time, whenever that was, managed to bend the yoke enough that it required some force and ignorance to make it work. Wasn't a fun job...im not the best wrencher but I'll try anything. Learned that I don't like changing those u-joints though.... "Mike Romain" <romainm@sympatico.ca> wrote in message news:42692B44.1C06BF0B@sympatico.ca... > Wow! > > You managed to get the hub out in one piece with a slap hammer!!!???? > > Crap man, those are sealed hubs and normally pull apart into pieces way > before the spindle is going to move. > > Or can/did you do it leaving the axle nut in place and slap the whole > works out? > > I use a sacrificial bolt and cut the wheels one way then the other so I > can hammer it out from behind. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > > Pi-Eyed Piper wrote: >> >> I JUST did this, had a "took took" sound. >> >> rent a slide hammer, It was a lot of grunting to get the hub out..... >> >> "Brian" <urk500@yahoo.com> wrote in message >> news:wpZ9e.10642$sp3.9592@newsread3.news.atl.earth link.net... >> > Hi, changing a front end u joint the right side. 1st time doing this. >> > Before i go ahead start this weekend thought I would ask if anyone has >> > a >> > good "How to" step by step web page or anything else? So I might make >> > quicker,safer work of this task. Although I have help, I have been told >> > if >> > I do this wrong the results could be disastrous. :-| >> > >> > Any advice would be welcome and appreciated...... >> > >> > -Brian >> > 91 YJ 4.0 >> > >> > o_o_o_o >> > /| ,[_____], >> > |ŻŻŻL --O|||||||O- >> > ()_)Ż()_) ŻŻŻ )_) >> > >> > >> > |
Re: *How to for a U Joint.....*
I shouldn't say this....I used an air chissel...got it out far enough I
could use a BFH from the front. I managed to destroy one of the bolt holes in assembly the with the chissel which I had to fix. The guy that changed them last time, whenever that was, managed to bend the yoke enough that it required some force and ignorance to make it work. Wasn't a fun job...im not the best wrencher but I'll try anything. Learned that I don't like changing those u-joints though.... "Mike Romain" <romainm@sympatico.ca> wrote in message news:42692B44.1C06BF0B@sympatico.ca... > Wow! > > You managed to get the hub out in one piece with a slap hammer!!!???? > > Crap man, those are sealed hubs and normally pull apart into pieces way > before the spindle is going to move. > > Or can/did you do it leaving the axle nut in place and slap the whole > works out? > > I use a sacrificial bolt and cut the wheels one way then the other so I > can hammer it out from behind. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > > Pi-Eyed Piper wrote: >> >> I JUST did this, had a "took took" sound. >> >> rent a slide hammer, It was a lot of grunting to get the hub out..... >> >> "Brian" <urk500@yahoo.com> wrote in message >> news:wpZ9e.10642$sp3.9592@newsread3.news.atl.earth link.net... >> > Hi, changing a front end u joint the right side. 1st time doing this. >> > Before i go ahead start this weekend thought I would ask if anyone has >> > a >> > good "How to" step by step web page or anything else? So I might make >> > quicker,safer work of this task. Although I have help, I have been told >> > if >> > I do this wrong the results could be disastrous. :-| >> > >> > Any advice would be welcome and appreciated...... >> > >> > -Brian >> > 91 YJ 4.0 >> > >> > o_o_o_o >> > /| ,[_____], >> > |ŻŻŻL --O|||||||O- >> > ()_)Ż()_) ŻŻŻ )_) >> > >> > >> > |
| All times are GMT -4. The time now is 04:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands