Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep JK Forum (https://www.jeepscanada.com/jeep-jk-forum-38/)
-   -   wrangler sport hard top remove 2 dr model (https://www.jeepscanada.com/jeep-jk-forum-38/wrangler-sport-hard-top-remove-2-dr-model-120377/)

woodman 06-15-2010 10:10 PM

wrangler sport hard top remove 2 dr model
 
Has anyone devised a method of removing the hard top without a buddy.Being a 2dr there is no lip to use soft hooks and crank it up

tracklock 06-16-2010 10:45 AM

Re: wrangler sport hard top remove 2 dr model
 
Yo! Woodman
Lange hoist a top is the answer of your problem if U've got a garage

http://www.langeoriginals.com/langeZ...&products_id=6

http://www.quadratec.com/products/12020_09.htm

JIMBOX 06-19-2010 09:46 AM

Re: wrangler sport hard top remove 2 dr model
 
You might also look into the RACOR HD hoist and it's sold by COSTCO,AMAZON, Ebay, for anywhere from $100 bucke to $140



Originally Posted by woodman (Post 550692)
Has anyone devised a method of removing the hard top without a buddy.Being a 2dr there is no lip to use soft hooks and crank it up

Yea, if you have a garage and it's a one man 5 minute job (after unbolting top), it'll support 250 lbs and these tops weigh from 75 to 125 lbs

It works easy for me because of my rack, but you can get rubber coated hooks to attach to the top

http://i294.photobucket.com/albums/m...mbowby/001.jpg
http://i294.photobucket.com/albums/m...mbowby/005.jpg

I've only used it once for my top and now I keep all my boat-float-fishing stuff on the hoist

Good luck

:3gears: JIMBO

Jeepminded 06-19-2010 10:54 AM

Re: wrangler sport hard top remove 2 dr model
 
Hi Woodman, I've made my own lift a few years ago, it's had a few revisions, but I do lift it on and off myself.

The link bellow in not my lift, but it did help me with the idea of making my own. This person used unistrut, I went with 2X3's.

http://www.jk-forum.com/showthread.p...ome+made+hoist

Pay very close attention to yout lift point, the top WILL teach you new lessons in ballence and centre of gravity.

The first lift is off the Jeep, then I have to move the top to the corner of the garage (clear the motor for the door opener) Second lift is to the ceiling, and then I secure with hold down straps secured to the joist with eye bolts, almost looks like three slings.

Another option is this cool lift bellow:

http://www.jk-forum.com/showthread.p...t=hardtop+lift

If this would work in my garage, I may go for it next season.

My home made lift provided hours of build enjoyment, and cost came in around 40 bucks.go

Good luck, and enjoy the open air driving.....Top down doors off!!!

woodman 06-19-2010 02:44 PM

Re: wrangler sport hard top remove 2 dr model
 
problem is there is nothing to grab onto ,your top has the rack which has lots to grab on
and hoist up

JIMBOX 06-19-2010 02:53 PM

Re: wrangler sport hard top remove 2 dr model
 
Well, thats true, but you could taylor length, two (each side) "J" hooks in front and two-longer, "J" hooks at the rear corners



Originally Posted by woodman (Post 550914)
problem is there is nothing to grab onto ,your top has the rack which has lots to grab on
and hoist up

You don't want to lift the hardtop with the "T" tops installed !!

:banana: JIMBO

woodman 06-19-2010 05:27 PM

Re: wrangler sport hard top remove 2 dr model
 
Ok I see your point ,i have a small crane at the back of my shop which once i find what centres the lift i could do it ---thanks for the info

Jeepminded 06-19-2010 05:51 PM

Re: wrangler sport hard top remove 2 dr model
 
Yep, threaded rod is a wonderfull thing, just be sure to use poly tube to keep it from marking up your hard top. I used a small propane torch and vise grips to fabricate mine.

Take your time to find the 'centre' once you have that the rest is easy!



Cheers!

woodman 06-20-2010 07:28 PM

Re: wrangler sport hard top remove 2 dr model
 
2 Attachment(s)
Using the threaded rod for hooks is a good idea and covering them is understandble,did you use 3/8 threaded rod for the hooks and they must have been quite a good size to get around that top.
You did a real good job,i don't have the garage but i have a crane outside my shop and my case is a bit different as its 2dr hard top so hooks (2)at the rear with the window open is ok and 2 at the front down low ,where the top meets the jeep will have to be the front 2(my top has no overhang)


All times are GMT -4. The time now is 12:35 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.03319 seconds with 5 queries