Winch mount on stock bumper
#11
Re: Winch mount on stock bumper
I don't think she go that low, but the mounting plate arrived yesterday, and it appears I have failed to take into account how heavy it is. 55lbs!!! Over half the weight of the winch itself. It's built like it was intended for a duce and half Army truck. Figure this weight will take it down another 1/4" based the fact that's what I lost with 60lbs stacked on the bumper. That puts me at 20 and 3/4 inches. Did this (with pics) for a guy on another forum who is in the process of also doing this mod. He's mounting a 9500 Warn, spec in at 65 lbs. Can't wait to get started, but Spring (yesterday) is over, it's gone from 55F above to 16F and trying to snow!!!! lolNOT!
topbanana
topbanana
#12
Re: Winch mount on stock bumper
We are a Rough Country dealer and I have sold many of the JK winch mounts, both for the original bumper and the hybrid stubby and they are very well built. Price/quality ratio is excellent.
Thanks,
Ozzie
PJF 4X4
1-877-424-0330
Thanks,
Ozzie
PJF 4X4
1-877-424-0330
#13
Re: Winch mount on stock bumper
Hey PJF4X4, always nice to have another contact for parts, as you can see from the photo's, I've already obtained the Rough Country mount, but I've bookmarked your website (under construction) for
future reference should I need any other RC products.
topbanana
future reference should I need any other RC products.
topbanana
#14
Re: Winch mount on stock bumper
Thx
Danny
#15
Re: Winch mount on stock bumper
In Feb. I installed the Rough Country 2.5' Lift and was impressed with the quality and bang-for-the-buck not to mention the ease of installation (24 hrs in sub-arctic temp)Now Iv'e got feelings back in my lower extremeties
#16
Re: Winch mount on stock bumper
Well the parts all came together last weekend and the winch mounting plate and winch were insalled.
Monday the wiring was hooked up and Tuesday the Sahara trim Plasti-coated and new plastic "buttons" were purchased from the stealership to reinstall the belly air deflector pan.
Wednesday half of the front end was re-disassembled because I needed a 1/4 of an inch more to slide the trim piece under the winch mount - d**m!!
topbanana
Monday the wiring was hooked up and Tuesday the Sahara trim Plasti-coated and new plastic "buttons" were purchased from the stealership to reinstall the belly air deflector pan.
Wednesday half of the front end was re-disassembled because I needed a 1/4 of an inch more to slide the trim piece under the winch mount - d**m!!
topbanana
Thread
Thread Starter
Forum
Replies
Last Post
ChickenLegz
Jeep & 4x4 Items Wanted
2
04-25-2011 04:51 PM
Handywired
Jeep Mailing List
0
02-03-2004 12:32 AM
L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III
Jeep Mailing List
2
09-15-2003 05:53 PM
Jerry Bransford
Jeep Mailing List
0
09-15-2003 12:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)