Jeep JK Forum This Forum is for the X, Sahara, Rubicon and Unlimited versions of the Jeep Wrangler JK. Introduced in 2007 the JK is the latest variant of the infamous Wrangler.

Wheel spacers

Thread Tools
 
Search this Thread
 
Old 12-03-2013, 07:52 PM
  #1  
Member
Thread Starter
 
newjeep's Avatar
 
Join Date: Jan 2012
Location: ontario
Posts: 39
Default Wheel spacers

Thinking of putting wheel spacers on the jeep. It's stock wheels and suspension. Just the Sahara 18 inch wheels. What do u think? Any disadvantages? Any risk of anything? Will the ride be the same better or worse? And what make of spacers are good? Any advice would be great, thanks guys!
newjeep is offline  
Old 12-03-2013, 09:26 PM
  #2  
Senior Member
 
oldfart's Avatar
 
Join Date: May 2010
Location: quebec
Posts: 640
Default Re: Wheel spacers

Wheel spacers will increase the load on the wheel bearings and also increase the scrub angle on the steering which will cause more of a tendency for bump steer.
oldfart is offline  
Old 12-04-2013, 08:03 AM
  #3  
Member
 
alexxx's Avatar
 
Join Date: Dec 2011
Location: new brunswick
Posts: 32
Default Re: Wheel spacers

will look a lot better have 1.5 on mine for two years no problems yet
alexxx is offline  
Old 12-04-2013, 08:29 PM
  #4  
Member
Thread Starter
 
newjeep's Avatar
 
Join Date: Jan 2012
Location: ontario
Posts: 39
Default

Originally Posted by alexxx
will look a lot better have 1.5 on mine for two years no problems yet
Any pics to see the difference
newjeep is offline  
Old 12-05-2013, 07:12 AM
  #5  
Senior Member
 
Topbanana's Avatar
 
Join Date: Oct 2010
Location: Southwestern Ontario
Posts: 291
Default Re: Wheel spacers

Little confusion here, why do you need spacers to put on stock Sahara 18"ers? They fit all models without any need for them. Going with a way wider tire?
topbanana
Topbanana is offline  
Old 12-05-2013, 03:56 PM
  #6  
Member
Thread Starter
 
newjeep's Avatar
 
Join Date: Jan 2012
Location: ontario
Posts: 39
Default Re: Wheel spacers

Just going for that wide stance look.
newjeep is offline  
Old 12-05-2013, 04:46 PM
  #7  
Senior Member
 
trigger's Avatar
 
Join Date: Mar 2013
Location: the kawarthas
Posts: 296
Default Re: Wheel spacers

you could buy offset rims... then you wouldn't need spacers...
trigger is offline  
Old 12-08-2013, 08:50 AM
  #8  
Member
 
Silver Billet's Avatar
 
Join Date: Apr 2013
Location: In The Garage
Posts: 50
Default Re: Wheel spacers

I installed 1.5" hub centric wheel spacers on my JK, The stance looked great, I had lots of positive comments, but took them off, I couldn't stand the flicks and water the tires threw up on the jeep, I was constantly using my wipers and couldn't keep the jeep clean, The mirrors and door handles were always covered in crap. Climbing in the jeep I always got messy.

Maybe I will install them in the summer when the roads are clear, and it's not so cold out for cleanup. I will keep my winter/off road wheel setup inside the fender flairs. If you don't mind mud, salt spray, and constantly using wipers to clear your windows go for it the stance looks good!



Attached Thumbnails Wheel spacers-photo1_zps85c9be10.jpg   Wheel spacers-img-20131124-00050_zps74b638d0.jpg  
Silver Billet is offline  
Old 12-11-2013, 02:46 PM
  #9  
Member
 
mechano's Avatar
 
Join Date: May 2011
Location: kitchener, ontario
Posts: 55
Default Re: Wheel spacers

agreed, the salt/mud/water spray tends to get a little annoying especially if u have doors or top off. also tends to be a little more harder on the wheel bearings.
but with that being said...It does look better!
mechano is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gautch
Jeep TJ Forum
3
09-01-2008 04:20 PM
Marty
Jeep Mailing List
164
02-08-2007 05:30 PM
KJ.Kate
Jeep Mailing List
18
12-20-2005 09:55 PM
Shadow
Jeep Mailing List
60
12-01-2003 07:08 AM
Tom Allen Lundgren
Jeep Mailing List
60
10-10-2003 11:23 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Wheel spacers



All times are GMT -4. The time now is 04:04 AM.

Page generated in 0.12866 seconds with 21 queries