Tire size
#2
Re: Tire size
I went from the stock 255 70 's up to 275 70 's. They work and look GREAT (not too big but look nice and "beefy")... but... With the stock height they rub a bit on the swaybar when the wheel is turned fully, and the spare barely attaches to the stock bracket (rubs a bit on the bumper... ). I bought small spacers (1/4 inch) which helped with the spare tire but did not fix the swaybar rub). The run is tolerable.. But makes the turning radius a bit longer.
Now that I have a 2 inch lift the tires fit with lots of room to spare at the swaybar.
Now that I have a 2 inch lift the tires fit with lots of room to spare at the swaybar.
Last edited by Gho; 06-16-2012 at 07:17 AM. Reason: Typo
#4
Re: Tire size
1st - completely stock (still in the lot!)
2nd - Just Wrangler Duratracs
Last Two: Duratracs and Lift (2.5" Teraflex Spacer Lift with extensions)
#5
Re: Tire size
I went from the stock 255 70 's up to 275 70 's. They work and look GREAT (not too big but look nice and "beefy")... but... With the stock height they rub a bit on the swaybar when the wheel is turned fully, and the spare barely attaches to the stock bracket (rubs a bit on the bumper... ). I bought small spacers (1/4 inch) which helped with the spare tire but did not fix the swaybar rub). The run is tolerable.. But makes the turning radius a bit longer.
Now that I have a 2 inch lift the tires fit with lots of room to spare at the swaybar.
Now that I have a 2 inch lift the tires fit with lots of room to spare at the swaybar.
#6
Re: Tire size
I ordered them in at National 4x4 in Smiths Falls. National is a chain and has a website also. Not sure if there is a location near you. They were about $50 for 6 of them. Brad is the guy to talk to (fantastic to deal with)... He'd be glad to order them in and ship them to you.
Last edited by Gho; 06-18-2012 at 05:51 PM. Reason: Misunderstood
Thread
Thread Starter
Forum
Replies
Last Post
Mike Romain
Jeep Mailing List
2
09-14-2003 09:46 PM
Grumman-581
Jeep Mailing List
0
09-09-2003 03:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)