Wonder if its bent.....TRE and Draglink.
Thread Starter
Junior Member
Joined: Jun 2011
Posts: 11
From: edmonton, AB
Wonder if its bent.....TRE and Draglink.
Hey i have a horrible DW, and was just basically wonder if there is supposed to be a bend in the tie rod (it rubs against the track bar).
and was wondering the drag link is supposed to have a bend before the steering knuckle...? pics maybe???
and was wondering the drag link is supposed to have a bend before the steering knuckle...? pics maybe???
Member
Joined: May 2010
Posts: 89
From: Vallée de l'Outaouais
Re: Wonder if its bent.....TRE and Draglink.
The Tie Rod should be completely straight end-to-end.
The Track Bar will have a couple of bends in it.
The Drag Link should have a slight bend at the knuckle to clear the inner C when turning, and another bend before the pitman arm end as well.
Hope this helps.
The Track Bar will have a couple of bends in it.
The Drag Link should have a slight bend at the knuckle to clear the inner C when turning, and another bend before the pitman arm end as well.
Hope this helps.
Last edited by ruggedscotsman; Jul 4, 2011 at 03:12 PM.
Member
Joined: May 2010
Posts: 89
From: Vallée de l'Outaouais
Re: Wonder if its bent.....TRE and Draglink.
OOOPS, I just saw you have a ZJ, and the pic above is a WJ.
From what I can find.. only the Drag Link on a ZJ should be straight. Both the Tie Rod and Tack Bar appear to have bends in all the picks I can find...but I'm no expert.
From what I can find.. only the Drag Link on a ZJ should be straight. Both the Tie Rod and Tack Bar appear to have bends in all the picks I can find...but I'm no expert.
Last edited by ruggedscotsman; Jul 4, 2011 at 03:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
serg
Jeep Mailing List
34
Aug 26, 2003 01:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
