04WJGuy

Hi all, helping a friend put a hybrid 3.5" short arm BB and some other goodies on his WJ this weekend so I thought I'd list the components and when I get home I'll post up some pics.

1. Mopar UpCountry coils
2. KOR 2.5" spacers
3. Tereflex 4" rear links
4. Addco swaybars F/R
5. JKS adjustable quick disconnects
6. JKS bar pin eliminators
7. JKS shock convertors
8. JKS a-arm spacer
9. KOR HD drag link
10. KOR HD tie rod bar
11. Mopar HD tie rod ends
12. IRO coil retainers
13. Custom MX-6 shocks (fronts now have rings instead of blades and studs)
14. IRO extended bumpstops
15. AirLift 1000lb rear air bags (inside rear coils)
16. JKS adjustable track bar
17. KOR HD bushings
18. KOR rock sliders
19. IRO T/C skid plate
20. Iceland Offroad winching bumper
21. 8500lb Champion winch
22. Spidertrax 1.25" wheel spacers
23. Dual Tennaco HD steering stabalizers
24. Tom Woods double cardan front driveshaft
25. Tires will be Firestone Destination A/T's 265/75-16 on stock rims

Here's a teaser shot I took with the cell when we finished the rear.

CrazyWJ242

OOOH! not too shabby, covering alot of the loose ends... and easy to swap coils and adjustable arms later on down the trail

04WJGuy

Finished it off finally. Weather wasn't co-operating much, total time was about 11 hours over 3 days because of the heavy rain. Now it just needs to go to the shop for new tires and an alignment. Rock sliders will go on after the tires are installed we both need a break from staring at the bottom of the Jeep.

04WJGuy

Couple more pics, still have to put the rock sliders on though.