As mentioned in my introduction I have a 54 Cj3b that I paid $150 for and it needs more then a little TLC. I am trying to get a ''TO DO'' list put together so I can get an estimated build cost. So far it goes like this:
New plugs - Check
Change oil - Check
Plug wires -
Sheet metal (to replace the missing floor) -
Front bumper -
Square tubing (to fix frame) -
Suspension Lift -

So I know where to get most of the material I need, but the suspension is stumping me. So my first question is will a lift for a '55 CJ5 be the same as I need for my '54 CJ3B?

Before anyone gets upset with me for not restoring. I do not have the funds to restore this Jeep and really just want a unique trail rig.

Thanks for any info you can offer.

 

Judging from your post it seems that you have fabrication and welding skills so you should be able to adapt a lift from a similar weight vehicle without too much trouble. Cut, grind, weld, repeat, ah! good times.

 

Hello *****

Thanks for sharing some information about Jeep. Here, You have given good description about jeep accessories also.

 

easy one ....

look if they have the same width and length ...if so, they`ll fit !

my jeep is composed of so many different components you woulndt believe !