TJ Roll cage
10-19-2009, 02:40 PM
#1
Member
Thread Starter
Join Date: Sep 2009
Location: St Albert, Alberta
Posts: 67
TJ Roll cage
Here is a roll cage that is being built for Hoser a friend of mine. After a small altercation with some off camber antics he wanted new and better roll over protection so we went to work to bend and burn this up for him.
We tried out the Blue Torch Fab Stanchens on this cage and realy like how they situate the windshield bar. They keep the dash bar nice and tight to the dash for no loss of vision(can see the hood and fenders with no obstuction) which is a step up from what we have used previously. Very happy with them for sure!!
We have some clean up to be done as well as the seat bar/seat belt bungs along with two struts that will be welded in once the roll cage is bolted back in his Jeep. Then we will paint er up and bolt in the Corbeau seats so he can get her out and play!!
We tried out the Blue Torch Fab Stanchens on this cage and realy like how they situate the windshield bar. They keep the dash bar nice and tight to the dash for no loss of vision(can see the hood and fenders with no obstuction) which is a step up from what we have used previously. Very happy with them for sure!!
We have some clean up to be done as well as the seat bar/seat belt bungs along with two struts that will be welded in once the roll cage is bolted back in his Jeep. Then we will paint er up and bolt in the Corbeau seats so he can get her out and play!!
10-20-2009, 02:02 PM
#3
Member
Thread Starter
Join Date: Sep 2009
Location: St Albert, Alberta
Posts: 67
Re: TJ Roll cage
Thanx man!!
This one we had some fun with as he wanted to maintain the use of his factory door surrounds and soft top as well as have some extra struts and a 5 point bar for future use. I will be sure to get some finished pics with the bar in the Jeep for ya guyz!!
Bear
This one we had some fun with as he wanted to maintain the use of his factory door surrounds and soft top as well as have some extra struts and a 5 point bar for future use. I will be sure to get some finished pics with the bar in the Jeep for ya guyz!!
Bear
10-31-2009, 11:56 PM
#4
Member
Thread Starter
Join Date: Sep 2009
Location: St Albert, Alberta
Posts: 67
Re: TJ Roll cage
Well our buddy came out today and pitched in on his Jeep. We got the cage done the new Corbeau's in with new 5 point harnesses. He got her out and tested the Jeep a little at the Park!!!!
Last edited by Da_Bear; 11-01-2009 at 12:15 AM.
11-01-2009, 10:39 AM
#6
Member
Thread Starter
Join Date: Sep 2009
Location: St Albert, Alberta
Posts: 67
Re: TJ Roll cage
Too funny....on the last climb he darn near did. It was slick with the sleet and rain we have been getting and on a steap one the Ected's limited slip in the front diff was working a little too good and skated him sideways at the crest...luckily he goot er in reverse real quick and stood on it....drove out of it. If it would have been a ;esser driver it would have been shiny side down for sure!!
!
!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)