88 XJ timing cover...
Guest
Posts: n/a
88 XJ timing cover...
88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
chain. Felpro seal kit
(http://www.pickproparts.com/PartsLis...umber=tcs45458) comes with
a "repair sleeve". Is this always needed, if so how/where do I install it.
Any other tips or potential gotchas would be appreciated.
Thanks
Von Rick
chain. Felpro seal kit
(http://www.pickproparts.com/PartsLis...umber=tcs45458) comes with
a "repair sleeve". Is this always needed, if so how/where do I install it.
Any other tips or potential gotchas would be appreciated.
Thanks
Von Rick
Guest
Posts: n/a
Re: 88 XJ timing cover...
This is really Mickey Mouse!!!!! The sleeve is made to repair the
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 88 XJ timing cover...
This is really Mickey Mouse!!!!! The sleeve is made to repair the
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 88 XJ timing cover...
This is really Mickey Mouse!!!!! The sleeve is made to repair the
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 88 XJ timing cover...
On Tue, 23 Oct 2007 12:49:44 -0700, L.W. (Bill) ------ III wrote:
> This is really Mickey Mouse!!!!!
Aha!
That explains a lot!
--
The quality of our thoughts is bordered on all sides by our facility with
language.
-J. Michael Straczynski, author (b.1954)
> This is really Mickey Mouse!!!!!
Aha!
That explains a lot!
--
The quality of our thoughts is bordered on all sides by our facility with
language.
-J. Michael Straczynski, author (b.1954)
Guest
Posts: n/a
Re: 88 XJ timing cover...
On Tue, 23 Oct 2007 12:49:44 -0700, L.W. (Bill) ------ III wrote:
> This is really Mickey Mouse!!!!!
Aha!
That explains a lot!
--
The quality of our thoughts is bordered on all sides by our facility with
language.
-J. Michael Straczynski, author (b.1954)
> This is really Mickey Mouse!!!!!
Aha!
That explains a lot!
--
The quality of our thoughts is bordered on all sides by our facility with
language.
-J. Michael Straczynski, author (b.1954)
Guest
Posts: n/a
Re: 88 XJ timing cover...
On Tue, 23 Oct 2007 12:49:44 -0700, L.W. (Bill) ------ III wrote:
> This is really Mickey Mouse!!!!!
Aha!
That explains a lot!
--
The quality of our thoughts is bordered on all sides by our facility with
language.
-J. Michael Straczynski, author (b.1954)
> This is really Mickey Mouse!!!!!
Aha!
That explains a lot!
--
The quality of our thoughts is bordered on all sides by our facility with
language.
-J. Michael Straczynski, author (b.1954)
Guest
Posts: n/a
Re: 88 XJ timing cover...
This is really Mickey Mouse!!!!! The sleeve is made to repair the
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 88 XJ timing cover...
This is really Mickey Mouse!!!!! The sleeve is made to repair the
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 88 XJ timing cover...
This is really Mickey Mouse!!!!! The sleeve is made to repair the
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com
balancer's seal surface. I'd throw it away, and buy a seal from your local
auto parts store. There are no guide pins like on all GM and Ford engines,
so you must have your balancer in place before tightening the cover's bolts.
Replace the timing chain while you're there:
http://www.----------.com/temp/l6TChain.pdf
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"D Vonrick" <dvonricknospam@bresnan.net> wrote in message
news:wLadne5y3egKrYPanZ2dnUVZ_h2pnZ2d@bresnan.com. ..
> 88XJ - 4.0L- Need to replace the timing cover seal, will check/replace
> chain. Felpro seal kit
> (http://www.pickproparts.com/PartsLis...umber=tcs45458) comes
with
> a "repair sleeve". Is this always needed, if so how/where do I install
it.
> Any other tips or potential gotchas would be appreciated.
>
> Thanks
> Von Rick
>
>
--
Posted via a free Usenet account from http://www.teranews.com