just put new clutch fluid line on do i need to bleed clutch? if so how?

 

There should be a bleeder valve on the external slave cylinder. It's located
under the vehicle on the bellhousing. I think it's on the passenger side. If
there isn't a bleeder, then it should self-bleed with a lot of clutch pumps.

Carl


"jackman600" <jacksonsangel@bellsouth.net> wrote in message
news:f478a1305aef5ed84a0ef7b11b79f787@localhost.ta lkaboutautos.com...
> just put new clutch fluid line on do i need to bleed clutch? if so how?
>

 

There should be a bleeder valve on the external slave cylinder. It's located
under the vehicle on the bellhousing. I think it's on the passenger side. If
there isn't a bleeder, then it should self-bleed with a lot of clutch pumps.

Carl


"jackman600" <jacksonsangel@bellsouth.net> wrote in message
news:f478a1305aef5ed84a0ef7b11b79f787@localhost.ta lkaboutautos.com...
> just put new clutch fluid line on do i need to bleed clutch? if so how?
>

 

There should be a bleeder valve on the external slave cylinder. It's located
under the vehicle on the bellhousing. I think it's on the passenger side. If
there isn't a bleeder, then it should self-bleed with a lot of clutch pumps.

Carl


"jackman600" <jacksonsangel@bellsouth.net> wrote in message
news:f478a1305aef5ed84a0ef7b11b79f787@localhost.ta lkaboutautos.com...
> just put new clutch fluid line on do i need to bleed clutch? if so how?
>

 

There could be air in there. The bleeder is on the passenger side. You
can do it by your self . Take the shift cover off and you can get it
from the top. I think you need a 9/16 and a 5/16 . Not 100% sure on
size.

Later Mike

 

There could be air in there. The bleeder is on the passenger side. You
can do it by your self . Take the shift cover off and you can get it
from the top. I think you need a 9/16 and a 5/16 . Not 100% sure on
size.

Later Mike

 

There could be air in there. The bleeder is on the passenger side. You
can do it by your self . Take the shift cover off and you can get it
from the top. I think you need a 9/16 and a 5/16 . Not 100% sure on
size.

Later Mike

 

I rhink they are self bleeding


--

"Carl" <carlsaiyed@hotmailREMOVE.com> wrote in message
news:pKidnbAPFvmBCgnYnZ2dnUVZ_sapnZ2d@comcast.com. ..
> There should be a bleeder valve on the external slave cylinder. It's
> located under the vehicle on the bellhousing. I think it's on the
> passenger side. If there isn't a bleeder, then it should self-bleed with a
> lot of clutch pumps.
>
> Carl
>
>
> "jackman600" <jacksonsangel@bellsouth.net> wrote in message
> news:f478a1305aef5ed84a0ef7b11b79f787@localhost.ta lkaboutautos.com...
>> just put new clutch fluid line on do i need to bleed clutch? if so how?
>>
>
>

 

I rhink they are self bleeding


--

"Carl" <carlsaiyed@hotmailREMOVE.com> wrote in message
news:pKidnbAPFvmBCgnYnZ2dnUVZ_sapnZ2d@comcast.com. ..
> There should be a bleeder valve on the external slave cylinder. It's
> located under the vehicle on the bellhousing. I think it's on the
> passenger side. If there isn't a bleeder, then it should self-bleed with a
> lot of clutch pumps.
>
> Carl
>
>
> "jackman600" <jacksonsangel@bellsouth.net> wrote in message
> news:f478a1305aef5ed84a0ef7b11b79f787@localhost.ta lkaboutautos.com...
>> just put new clutch fluid line on do i need to bleed clutch? if so how?
>>
>
>

 

I rhink they are self bleeding


--

"Carl" <carlsaiyed@hotmailREMOVE.com> wrote in message
news:pKidnbAPFvmBCgnYnZ2dnUVZ_sapnZ2d@comcast.com. ..
> There should be a bleeder valve on the external slave cylinder. It's
> located under the vehicle on the bellhousing. I think it's on the
> passenger side. If there isn't a bleeder, then it should self-bleed with a
> lot of clutch pumps.
>
> Carl
>
>
> "jackman600" <jacksonsangel@bellsouth.net> wrote in message
> news:f478a1305aef5ed84a0ef7b11b79f787@localhost.ta lkaboutautos.com...
>> just put new clutch fluid line on do i need to bleed clutch? if so how?
>>
>
>