PCV rattle 98 JGC 5.2
Guest
Posts: n/a
PCV rattle 98 JGC 5.2
I noticed a strange rattle under the hood today, the PCV was vibrating
a million miles an hour. It still runs good but sounds a bit different
(other than the rattle). I just replace the PCV a week or so ago. Any
ideas?
Thanks in advance, JK
a million miles an hour. It still runs good but sounds a bit different
(other than the rattle). I just replace the PCV a week or so ago. Any
ideas?
Thanks in advance, JK
Guest
Posts: n/a
Re: PCV rattle 98 JGC 5.2
I've never seen it, it's designed to be closed against a spring
with usually a very small orifice allowing what is predicted to be the
idle blow-by to keep a vacuum of clean fresh air in the crankcase. And
opening at full throttle to reburned that larger amount of blow-by. Is
the valve very close to an intake port?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JRK58@MSN.COM wrote:
>
> I noticed a strange rattle under the hood today, the PCV was vibrating
> a million miles an hour. It still runs good but sounds a bit different
> (other than the rattle). I just replace the PCV a week or so ago. Any
> ideas?
> Thanks in advance, JK
with usually a very small orifice allowing what is predicted to be the
idle blow-by to keep a vacuum of clean fresh air in the crankcase. And
opening at full throttle to reburned that larger amount of blow-by. Is
the valve very close to an intake port?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JRK58@MSN.COM wrote:
>
> I noticed a strange rattle under the hood today, the PCV was vibrating
> a million miles an hour. It still runs good but sounds a bit different
> (other than the rattle). I just replace the PCV a week or so ago. Any
> ideas?
> Thanks in advance, JK
Guest
Posts: n/a
Re: PCV rattle 98 JGC 5.2
I've never seen it, it's designed to be closed against a spring
with usually a very small orifice allowing what is predicted to be the
idle blow-by to keep a vacuum of clean fresh air in the crankcase. And
opening at full throttle to reburned that larger amount of blow-by. Is
the valve very close to an intake port?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JRK58@MSN.COM wrote:
>
> I noticed a strange rattle under the hood today, the PCV was vibrating
> a million miles an hour. It still runs good but sounds a bit different
> (other than the rattle). I just replace the PCV a week or so ago. Any
> ideas?
> Thanks in advance, JK
with usually a very small orifice allowing what is predicted to be the
idle blow-by to keep a vacuum of clean fresh air in the crankcase. And
opening at full throttle to reburned that larger amount of blow-by. Is
the valve very close to an intake port?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JRK58@MSN.COM wrote:
>
> I noticed a strange rattle under the hood today, the PCV was vibrating
> a million miles an hour. It still runs good but sounds a bit different
> (other than the rattle). I just replace the PCV a week or so ago. Any
> ideas?
> Thanks in advance, JK
Guest
Posts: n/a
Re: PCV rattle 98 JGC 5.2
I've never seen it, it's designed to be closed against a spring
with usually a very small orifice allowing what is predicted to be the
idle blow-by to keep a vacuum of clean fresh air in the crankcase. And
opening at full throttle to reburned that larger amount of blow-by. Is
the valve very close to an intake port?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JRK58@MSN.COM wrote:
>
> I noticed a strange rattle under the hood today, the PCV was vibrating
> a million miles an hour. It still runs good but sounds a bit different
> (other than the rattle). I just replace the PCV a week or so ago. Any
> ideas?
> Thanks in advance, JK
with usually a very small orifice allowing what is predicted to be the
idle blow-by to keep a vacuum of clean fresh air in the crankcase. And
opening at full throttle to reburned that larger amount of blow-by. Is
the valve very close to an intake port?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JRK58@MSN.COM wrote:
>
> I noticed a strange rattle under the hood today, the PCV was vibrating
> a million miles an hour. It still runs good but sounds a bit different
> (other than the rattle). I just replace the PCV a week or so ago. Any
> ideas?
> Thanks in advance, JK
Guest
Posts: n/a
Re: PCV rattle 98 JGC 5.2
The factory likely forgot to put in the spring or the wrong spring or
something like that. Things 'do' come broken right out of the box.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JRK58@MSN.COM wrote:
>
> Hello Bill, I'm not real sure how close to intake port it is. I just
> replaced it and it's not doing it anymore. Pretty weird, I've never
> seen anything like it.
>
> Take care, JK
something like that. Things 'do' come broken right out of the box.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JRK58@MSN.COM wrote:
>
> Hello Bill, I'm not real sure how close to intake port it is. I just
> replaced it and it's not doing it anymore. Pretty weird, I've never
> seen anything like it.
>
> Take care, JK
Guest
Posts: n/a
Re: PCV rattle 98 JGC 5.2
The factory likely forgot to put in the spring or the wrong spring or
something like that. Things 'do' come broken right out of the box.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JRK58@MSN.COM wrote:
>
> Hello Bill, I'm not real sure how close to intake port it is. I just
> replaced it and it's not doing it anymore. Pretty weird, I've never
> seen anything like it.
>
> Take care, JK
something like that. Things 'do' come broken right out of the box.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JRK58@MSN.COM wrote:
>
> Hello Bill, I'm not real sure how close to intake port it is. I just
> replaced it and it's not doing it anymore. Pretty weird, I've never
> seen anything like it.
>
> Take care, JK
Guest
Posts: n/a
Re: PCV rattle 98 JGC 5.2
The factory likely forgot to put in the spring or the wrong spring or
something like that. Things 'do' come broken right out of the box.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JRK58@MSN.COM wrote:
>
> Hello Bill, I'm not real sure how close to intake port it is. I just
> replaced it and it's not doing it anymore. Pretty weird, I've never
> seen anything like it.
>
> Take care, JK
something like that. Things 'do' come broken right out of the box.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JRK58@MSN.COM wrote:
>
> Hello Bill, I'm not real sure how close to intake port it is. I just
> replaced it and it's not doing it anymore. Pretty weird, I've never
> seen anything like it.
>
> Take care, JK