Dist Cap, rotor and Wires
Guest
Posts: n/a
Dist Cap, rotor and Wires
The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
I'll agree to pay their prices for the convenience, but because they don't
stock them for me, I won't pay top dollar.
Rather than pay them to special order them, I'd rather order them on-line.
Anyone got a good source for original Jeep wires? I've never had good luck
with aftermarket.
I'll agree to pay their prices for the convenience, but because they don't
stock them for me, I won't pay top dollar.
Rather than pay them to special order them, I'd rather order them on-line.
Anyone got a good source for original Jeep wires? I've never had good luck
with aftermarket.
Guest
Posts: n/a
Re: Dist Cap, rotor and Wires
Hi Steve,
I would go to your local auto parts store, and ask for a good set
of radio noise suppression ignition wires for your car. Look for a name
brand you recognize. There are some really Mickey Mouse sets out there,
especial the ones advised in magazines.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Foley wrote:
>
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
>
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
I would go to your local auto parts store, and ask for a good set
of radio noise suppression ignition wires for your car. Look for a name
brand you recognize. There are some really Mickey Mouse sets out there,
especial the ones advised in magazines.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Foley wrote:
>
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
>
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
Guest
Posts: n/a
Re: Dist Cap, rotor and Wires
Hi Steve,
I would go to your local auto parts store, and ask for a good set
of radio noise suppression ignition wires for your car. Look for a name
brand you recognize. There are some really Mickey Mouse sets out there,
especial the ones advised in magazines.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Foley wrote:
>
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
>
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
I would go to your local auto parts store, and ask for a good set
of radio noise suppression ignition wires for your car. Look for a name
brand you recognize. There are some really Mickey Mouse sets out there,
especial the ones advised in magazines.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Foley wrote:
>
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
>
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
Guest
Posts: n/a
Re: Dist Cap, rotor and Wires
Hi Steve,
I would go to your local auto parts store, and ask for a good set
of radio noise suppression ignition wires for your car. Look for a name
brand you recognize. There are some really Mickey Mouse sets out there,
especial the ones advised in magazines.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Foley wrote:
>
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
>
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
I would go to your local auto parts store, and ask for a good set
of radio noise suppression ignition wires for your car. Look for a name
brand you recognize. There are some really Mickey Mouse sets out there,
especial the ones advised in magazines.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Foley wrote:
>
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
>
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
Guest
Posts: n/a
Re: Dist Cap, rotor and Wires
Hi Steve,
I would go to your local auto parts store, and ask for a good set
of radio noise suppression ignition wires for your car. Look for a name
brand you recognize. There are some really Mickey Mouse sets out there,
especial the ones advised in magazines.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Foley wrote:
>
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
>
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
I would go to your local auto parts store, and ask for a good set
of radio noise suppression ignition wires for your car. Look for a name
brand you recognize. There are some really Mickey Mouse sets out there,
especial the ones advised in magazines.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Foley wrote:
>
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
>
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
Guest
Posts: n/a
Re: Dist Cap, rotor and Wires
Steve Foley did pass the time by typing:
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
Try Autozone, NAPA, PepBoys, Canadian Tyre, etc.
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
www.buymopar.com
www.chryslerpartsdirect.com
Both OEM (dealerships) that don't charge the reach-around rate.
Or make a set yourself, it's not that hard.
I've made several using Accell and other brands of
wire. That way you can choose what ends you put on
or change sizes and have a custom job.
Helps if you have a vice to squeeze off the connectors
but a pair of vice grips and a sledge works too.
--
DougW
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
Try Autozone, NAPA, PepBoys, Canadian Tyre, etc.
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
www.buymopar.com
www.chryslerpartsdirect.com
Both OEM (dealerships) that don't charge the reach-around rate.
Or make a set yourself, it's not that hard.
I've made several using Accell and other brands of
wire. That way you can choose what ends you put on
or change sizes and have a custom job.
Helps if you have a vice to squeeze off the connectors
but a pair of vice grips and a sledge works too.
--
DougW
Guest
Posts: n/a
Re: Dist Cap, rotor and Wires
Steve Foley did pass the time by typing:
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
Try Autozone, NAPA, PepBoys, Canadian Tyre, etc.
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
www.buymopar.com
www.chryslerpartsdirect.com
Both OEM (dealerships) that don't charge the reach-around rate.
Or make a set yourself, it's not that hard.
I've made several using Accell and other brands of
wire. That way you can choose what ends you put on
or change sizes and have a custom job.
Helps if you have a vice to squeeze off the connectors
but a pair of vice grips and a sledge works too.
--
DougW
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
Try Autozone, NAPA, PepBoys, Canadian Tyre, etc.
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
www.buymopar.com
www.chryslerpartsdirect.com
Both OEM (dealerships) that don't charge the reach-around rate.
Or make a set yourself, it's not that hard.
I've made several using Accell and other brands of
wire. That way you can choose what ends you put on
or change sizes and have a custom job.
Helps if you have a vice to squeeze off the connectors
but a pair of vice grips and a sledge works too.
--
DougW
Guest
Posts: n/a
Re: Dist Cap, rotor and Wires
Steve Foley did pass the time by typing:
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
Try Autozone, NAPA, PepBoys, Canadian Tyre, etc.
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
www.buymopar.com
www.chryslerpartsdirect.com
Both OEM (dealerships) that don't charge the reach-around rate.
Or make a set yourself, it's not that hard.
I've made several using Accell and other brands of
wire. That way you can choose what ends you put on
or change sizes and have a custom job.
Helps if you have a vice to squeeze off the connectors
but a pair of vice grips and a sledge works too.
--
DougW
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
Try Autozone, NAPA, PepBoys, Canadian Tyre, etc.
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
www.buymopar.com
www.chryslerpartsdirect.com
Both OEM (dealerships) that don't charge the reach-around rate.
Or make a set yourself, it's not that hard.
I've made several using Accell and other brands of
wire. That way you can choose what ends you put on
or change sizes and have a custom job.
Helps if you have a vice to squeeze off the connectors
but a pair of vice grips and a sledge works too.
--
DougW
Guest
Posts: n/a
Re: Dist Cap, rotor and Wires
Steve Foley did pass the time by typing:
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
Try Autozone, NAPA, PepBoys, Canadian Tyre, etc.
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
www.buymopar.com
www.chryslerpartsdirect.com
Both OEM (dealerships) that don't charge the reach-around rate.
Or make a set yourself, it's not that hard.
I've made several using Accell and other brands of
wire. That way you can choose what ends you put on
or change sizes and have a custom job.
Helps if you have a vice to squeeze off the connectors
but a pair of vice grips and a sledge works too.
--
DougW
> The three local stealerships do not stock wires for my 1987 Wrangler (4.2).
> I'll agree to pay their prices for the convenience, but because they don't
> stock them for me, I won't pay top dollar.
Try Autozone, NAPA, PepBoys, Canadian Tyre, etc.
> Rather than pay them to special order them, I'd rather order them on-line.
> Anyone got a good source for original Jeep wires? I've never had good luck
> with aftermarket.
www.buymopar.com
www.chryslerpartsdirect.com
Both OEM (dealerships) that don't charge the reach-around rate.
Or make a set yourself, it's not that hard.
I've made several using Accell and other brands of
wire. That way you can choose what ends you put on
or change sizes and have a custom job.
Helps if you have a vice to squeeze off the connectors
but a pair of vice grips and a sledge works too.
--
DougW
Guest
Posts: n/a
Re: Dist Cap, rotor and Wires
AutoZone now carries Bosch wiring sets in stock
WIRESET for a
1987 JEEP WRANGLER 4WD
Normal Stock
Special Order
Not Available
Item Part
No.
Warranty Core
Value Unit
Price Availability
Store Web
DOUBLE-SILICONE 4315 LLT $17.99
SPECTRE
WIRE SEPARATOR 4216 $0.99
VALUCRAFT 1315 2 YR $8.99
BOSCH 09279 LLT $26.99
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42D6CBCF.2CFF11C7@***.net...
> Hi Steve,
> I would go to your local auto parts store, and ask for a good set
> of radio noise suppression ignition wires for your car. Look for a name
> brand you recognize. There are some really Mickey Mouse sets out there,
> especial the ones advised in magazines.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve Foley wrote:
>>
>> The three local stealerships do not stock wires for my 1987 Wrangler
>> (4.2).
>> I'll agree to pay their prices for the convenience, but because they
>> don't
>> stock them for me, I won't pay top dollar.
>>
>> Rather than pay them to special order them, I'd rather order them
>> on-line.
>> Anyone got a good source for original Jeep wires? I've never had good
>> luck
>> with aftermarket.
WIRESET for a
1987 JEEP WRANGLER 4WD
Normal Stock
Special Order
Not Available
Item Part
No.
Warranty Core
Value Unit
Price Availability
Store Web
DOUBLE-SILICONE 4315 LLT $17.99
SPECTRE
WIRE SEPARATOR 4216 $0.99
VALUCRAFT 1315 2 YR $8.99
BOSCH 09279 LLT $26.99
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42D6CBCF.2CFF11C7@***.net...
> Hi Steve,
> I would go to your local auto parts store, and ask for a good set
> of radio noise suppression ignition wires for your car. Look for a name
> brand you recognize. There are some really Mickey Mouse sets out there,
> especial the ones advised in magazines.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve Foley wrote:
>>
>> The three local stealerships do not stock wires for my 1987 Wrangler
>> (4.2).
>> I'll agree to pay their prices for the convenience, but because they
>> don't
>> stock them for me, I won't pay top dollar.
>>
>> Rather than pay them to special order them, I'd rather order them
>> on-line.
>> Anyone got a good source for original Jeep wires? I've never had good
>> luck
>> with aftermarket.